{"title":"All","description":"","products":[{"product_id":"linear-multicode-308911-1-channel-visor-transmitter","title":"Linear Multicode 308911: 1-Channel Visor Transmitter","description":"\u003cp\u003eThe Linear 308911 is a 1-channel visor transmitter that uses the Multi-Code radio format on 300 MHz. It has 1,024 codes set on one 10-position DIP switch. It runs on a 9-volt battery and measures 2.5 in W x 3.75 in H x 0.875 in D.\u003c\/p\u003e\u003cp\u003ePress the single button to send the code to the receiver. A red LED shows test and operate. The battery and coding switches are easy to reach. A visor clip is included. The transmitter only operates receivers set to the same code.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e308911 transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code receivers, including the Linear 109950 and 302850 gate receivers with the jumper set to 300 MHz.\u003c\/li\u003e\n\u003cli\u003eSet the transmitter DIP switches to match the receiver code before use.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear MegaCode (318 MHz) or Delta-3 receivers, which use different radio formats. For Stanley-version receivers on 310 MHz, use the 310 MHz Multi-Code transmitters.\u003c\/li\u003e\n\u003cli\u003eOther Linear Multi-Code 300 MHz transmitters: 308911 (1-channel visor), 412001 (2-channel visor), 414001 (4-channel visor), 306010 and 307010 (1-channel key ring), 308301 (2-channel key ring).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951414083,"sku":"MCS308911","price":18.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/308911.jpeg?v=1536876891"},{"product_id":"linear-multicode-412001-2-channel-visor-transmitter","title":"Linear Multicode 412001: 2-Channel Visor Transmitter","description":"\u003cp\u003eThe Linear 412001 is a 2-channel visor transmitter that uses the Multi-Code radio format on 300 MHz. It has 1,024 codes per channel set on two 10-position DIP switches. It runs on a 9-volt battery and measures 2.5 in W x 3.75 in H x 0.875 in D.\u003c\/p\u003e\u003cp\u003eThe left button sends channel 1 and the right button sends channel 2. Each channel is coded on its own, so one remote can run a common gate and a private door. The buttons have raised dimples to find them by touch. A red LED shows test and operate. The battery and coding switches are easy to reach. A visor clip is included. The transmitter only operates receivers set to the same code.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e412001 transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code receivers, including the Linear 109950 and 302850 gate receivers with the jumper set to 300 MHz.\u003c\/li\u003e\n\u003cli\u003eSet the transmitter DIP switches to match the receiver code before use.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear MegaCode (318 MHz) or Delta-3 receivers, which use different radio formats. For Stanley-version receivers on 310 MHz, use the 310 MHz Multi-Code transmitters.\u003c\/li\u003e\n\u003cli\u003eOther Linear Multi-Code 300 MHz transmitters: 308911 (1-channel visor), 412001 (2-channel visor), 414001 (4-channel visor), 306010 and 307010 (1-channel key ring), 308301 (2-channel key ring).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951415363,"sku":"412001","price":29.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/412001.jpeg?v=1536876891"},{"product_id":"linear-multicode-414001-4-channel-visor-transmitter","title":"Linear Multicode 414001: 4-Channel Visor Transmitter","description":"\u003cp\u003eThe Linear 414001 is a 4-channel visor transmitter that uses the Multi-Code radio format on 300 MHz. It has 512 codes per channel set on two 10-position DIP switches. It runs on a 9-volt battery and measures 2.5 in W x 3.75 in H x 0.875 in D.\u003c\/p\u003e\u003cp\u003eEach of the four buttons sends its own channel. The buttons have raised dimples to find them by touch. A red LED shows test and operate. The battery and coding switches are easy to reach. A visor clip is included. The transmitter only operates receivers set to the same code.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e414001 transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code receivers, including the Linear 109950 and 302850 gate receivers with the jumper set to 300 MHz.\u003c\/li\u003e\n\u003cli\u003eSet the transmitter DIP switches to match the receiver code before use.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear MegaCode (318 MHz) or Delta-3 receivers, which use different radio formats. For Stanley-version receivers on 310 MHz, use the 310 MHz Multi-Code transmitters.\u003c\/li\u003e\n\u003cli\u003eOther Linear Multi-Code 300 MHz transmitters: 308911 (1-channel visor), 412001 (2-channel visor), 414001 (4-channel visor), 306010 and 307010 (1-channel key ring), 308301 (2-channel key ring).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951416515,"sku":"414001","price":30.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/414001.jpeg?v=1536876891"},{"product_id":"linear-multicode-306010-1-channel-key-ring-transmitter","title":"Linear Multicode 306010: 1-Channel Key Ring Transmitter","description":"\u003cp\u003eThe Linear 306010 is a 1-channel key ring transmitter that uses the Multi-Code radio format on 300 MHz. It has 1,024 codes set on a 10-position DIP switch. It runs on a 12-volt battery and measures 1.5 in W x 2.5 in H x 0.625 in D.\u003c\/p\u003e\u003cp\u003ePress the single button to send the code to the receiver. A red LED shows test and operate. The battery and coding switches are easy to reach. A molded-in hole takes a key ring. The transmitter only operates receivers set to the same code.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code receivers, including the Linear 109950 and 302850 gate receivers with the jumper set to 300 MHz.\u003c\/li\u003e\n\u003cli\u003eSet the transmitter DIP switches to match the receiver code before use.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear MegaCode (318 MHz) or Delta-3 receivers, which use different radio formats. For Stanley-version receivers on 310 MHz, use the 310 MHz Multi-Code transmitters.\u003c\/li\u003e\n\u003cli\u003eOther Linear Multi-Code 300 MHz transmitters: 308911 (1-channel visor), 412001 (2-channel visor), 414001 (4-channel visor), 306010 and 307010 (1-channel key ring), 308301 (2-channel key ring).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951417027,"sku":"306010","price":25.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/306010.jpeg?v=1536876891"},{"product_id":"linear-multicode-307010-1_channel-key-ring-transmitter","title":"Linear Multicode 307010: 1-Channel Key Ring Transmitter","description":"\u003cp\u003eThe Linear 307010 is a 1-channel key ring transmitter that uses the Multi-Code radio format on 300 MHz. It has 1,024 codes set on one 10-position DIP switch. It runs on a 12-volt battery and measures 1.5 in W x 2 in H x 0.625 in D.\u003c\/p\u003e\u003cp\u003ePress the single button to send the code to the receiver. A red LED shows test and operate. The battery and coding switches are easy to reach. A molded-in hole takes a key ring. The transmitter only operates receivers set to the same code.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code receivers, including the Linear 109950 and 302850 gate receivers with the jumper set to 300 MHz.\u003c\/li\u003e\n\u003cli\u003eSet the transmitter DIP switches to match the receiver code before use.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear MegaCode (318 MHz) or Delta-3 receivers, which use different radio formats. For Stanley-version receivers on 310 MHz, use the 310 MHz Multi-Code transmitters.\u003c\/li\u003e\n\u003cli\u003eOther Linear Multi-Code 300 MHz transmitters: 308911 (1-channel visor), 412001 (2-channel visor), 414001 (4-channel visor), 306010 and 307010 (1-channel key ring), 308301 (2-channel key ring).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951418115,"sku":"307010","price":25.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/307010.jpeg?v=1536876890"},{"product_id":"linear-multicode-308301-dual-button-mini-transmitter","title":"Linear Multicode 308301: Dual Button Mini Transmitter","description":"\u003cp\u003eThe Linear 308301 is a 2-channel key ring transmitter that uses the Multi-Code radio format on 300 MHz. It has 1,024 codes per channel set on two 10-position DIP switches. It runs on a 12-volt battery and measures 1.5 in W x 2.5 in H x 0.625 in D.\u003c\/p\u003e\u003cp\u003eThe left button sends channel 1 and the right button sends channel 2. Each channel is coded on its own, so one remote can run a common gate and a private door. The buttons have raised dimples to find them by touch. A red LED shows test and operate. The battery and coding switches are easy to reach. A molded-in hole takes a key ring. The transmitter only operates receivers set to the same code.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code receivers, including the Linear 109950 and 302850 gate receivers with the jumper set to 300 MHz.\u003c\/li\u003e\n\u003cli\u003eSet the transmitter DIP switches to match the receiver code before use.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear MegaCode (318 MHz) or Delta-3 receivers, which use different radio formats. For Stanley-version receivers on 310 MHz, use the 310 MHz Multi-Code transmitters.\u003c\/li\u003e\n\u003cli\u003eOther Linear Multi-Code 300 MHz transmitters: 308911 (1-channel visor), 412001 (2-channel visor), 414001 (4-channel visor), 306010 and 307010 (1-channel key ring), 308301 (2-channel key ring).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951418307,"sku":"308301","price":34.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/308301.jpeg?v=1536876890"},{"product_id":"stanley-multicode-298601-wireless-keypad-310-mhz","title":"Stanley Multicode 298601: Wireless Keypad 310 MHz","description":"\u003cp\u003eThe Linear 298601 is a weather-resistant wireless keypad for Stanley-version Multi-Code receivers on 310 MHz. Entering a programmable 4-digit access code sends a radio code to the receiver to run the door or gate operator. The radio code is set on DIP switches with 1,024 choices. It runs on a 9-volt battery and measures 2.75 in W x 6.25 in H x 1 in D.\u003c\/p\u003e\u003cp\u003eThe keys light up during use, and the keypad blinks during use when the battery is low. It has a test and operate indicator and easy battery access. Linear's instructions show it screw-mounted to a door jamb or a nearby wall.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 310 MHz Stanley and Multi-Code receivers, including the Linear 309013 garage receiver and the 109950 and 302850 gate receivers with the jumper set to 310 MHz.\u003c\/li\u003e\n\u003cli\u003eSet the keypad DIP switches to match the receiver code, then program your 4-digit access code.\u003c\/li\u003e\n\u003cli\u003eDoes not work with 300 MHz Multi-Code, MegaCode or Delta-3 receivers.\u003c\/li\u003e\n\u003cli\u003eLinear sells a 300 MHz Multi-Code version of this keypad as model 420001.\u003c\/li\u003e\n\u003cli\u003eOther Linear 310 MHz Stanley-version Multi-Code parts: 105015 (1-channel visor), 108210 (1-channel key ring), 308302 (2-channel key ring), 298601 (wireless keypad), 105104 (safety edge transmitter), 309013 (garage receiver).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951418499,"sku":"298601","price":49.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/298601.jpeg?v=1536876890"},{"product_id":"linear-multicode-109020-1-channel-receiver","title":"Linear Multicode 109020: 1 Channel Receiver","description":"\u003cp\u003eThe Linear 109020 is a 1-channel Multi-Code receiver for residential garage door openers on 300 MHz. It has 1,024 codes set on a 10-position DIP switch and runs on 24 VAC from the opener or a separate 24 VAC transformer.\u003c\/p\u003e\u003cp\u003eTwo-way terminal lugs slide under the opener's three terminal screws, so the receiver usually mounts right on the opener. An 11 in wire antenna is attached. When a Multi-Code transmitter set to the same code is pressed, the output triggers the opener. Size is 3 in W x 5.5 in H x 1.5 in D.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFits openers with three radio terminals and 24 VAC radio power. For remote placement with push-on terminals, use the Linear 109206 3-wire adapter.\u003c\/li\u003e\n\u003cli\u003eWhere the opener cannot power the receiver, Linear offers the 109201 and 109207 wiring harnesses with plug-in transformer, sold separately.\u003c\/li\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code transmitters such as the 308911, 412001, 306010 and 307010.\u003c\/li\u003e\n\u003cli\u003eRelated Linear Multi-Code receivers: 109950 (1-channel, 12-24 V, 300\/310 MHz), 302850 (2-channel, 12-24 V, 300\/310 MHz), 109920 (1-channel, 115 VAC plug-in transformer, 300 MHz), 109020 (1-channel garage receiver, 300 MHz), 309013 (1-channel garage receiver, 310 MHz).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951418755,"sku":"109020","price":39.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/109020.jpeg?v=1536876890"},{"product_id":"linear-multicode-109950-1-channel-12-24v-gate-receiver","title":"Linear Multicode 109950: 1-Channel 12-24V Gate Receiver","description":"\u003cp\u003eThe Linear 109950 is a 1-channel gate receiver for Multi-Code radio controls. An internal jumper sets it to 300 MHz for standard Multi-Code transmitters or 310 MHz for Stanley-version Multi-Code transmitters. It has 1,024 codes set on a 10-position DIP switch and runs on 12-24 V AC or DC from the operator, a separate transformer or a DC supply.\u003c\/p\u003e\u003cp\u003eThe output is a normally open relay rated up to 1 A at 30 VAC, on a 3 ft 2-conductor lead with spade lugs for the operator's radio terminals. An 11 in wire whip antenna on a Type-F connector is included for local reception. A bulkhead connector and 3 ft of coax let you mount the antenna outside a metal operator housing. Size is 3.625 in W x 5.25 in H x 1.5 in D.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e109950 receiver\u003c\/li\u003e\n\u003cli\u003e11 in whip antenna\u003c\/li\u003e\n\u003cli\u003e3 ft coax and bulkhead connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code transmitters (308911, 412001, 414001, 306010, 307010, 308301, 302210) or 310 MHz Stanley-version transmitters (105015, 108210, 308302, 298601, 105104). Set the jumper for the frequency you use.\u003c\/li\u003e\n\u003cli\u003eSet the receiver DIP switches to match the transmitter code.\u003c\/li\u003e\n\u003cli\u003eFor a receiver inside a metal enclosure, Linear offers the 106603 remote whip antenna, sold separately.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear MegaCode or Delta-3 transmitters.\u003c\/li\u003e\n\u003cli\u003eRelated Linear Multi-Code receivers: 109950 (1-channel, 12-24 V, 300\/310 MHz), 302850 (2-channel, 12-24 V, 300\/310 MHz), 109920 (1-channel, 115 VAC plug-in transformer, 300 MHz), 109020 (1-channel garage receiver, 300 MHz), 309013 (1-channel garage receiver, 310 MHz).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951420035,"sku":"1099-50","price":58.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/109950.jpeg?v=1536876889"},{"product_id":"linear-multicode-302850-2-channel-12-24v-gate-receiver","title":"Linear Multicode 3028-50: 2-Channel 12-24V Gate Receiver","description":"\u003cp\u003eThe Linear 302850 is a 2-channel gate receiver for Multi-Code radio controls. An internal jumper sets it to 300 MHz for standard Multi-Code transmitters or 310 MHz for Stanley-version Multi-Code transmitters. It has 512 codes set on a 9-position DIP switch; switch 10 on the transmitter picks which channel fires. It runs on 12-24 V AC or DC from the operator, a separate transformer or a DC supply.\u003c\/p\u003e\u003cp\u003eEach channel has a normally open relay rated up to 1 A at 30 VAC, on 3 ft 2-conductor leads with spade lugs. An 11 in wire whip antenna on a Type-F connector is included. A bulkhead connector and 3 ft of coax let you mount the antenna outside a metal operator housing. Size is 3.625 in W x 5.25 in H x 1.5 in D.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e302850 receiver\u003c\/li\u003e\n\u003cli\u003e11 in whip antenna\u003c\/li\u003e\n\u003cli\u003e3 ft coax and bulkhead connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with 300 MHz Multi-Code transmitters or 310 MHz Stanley-version Multi-Code transmitters. Set the jumper for the frequency you use.\u003c\/li\u003e\n\u003cli\u003eSet the receiver DIP switches to match the transmitter code; use transmitter switch 10 to select channel 1 or 2.\u003c\/li\u003e\n\u003cli\u003eFor a receiver inside a metal enclosure, Linear offers the 106603 remote whip antenna, sold separately.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear MegaCode or Delta-3 transmitters.\u003c\/li\u003e\n\u003cli\u003eRelated Linear Multi-Code receivers: 109950 (1-channel, 12-24 V, 300\/310 MHz), 302850 (2-channel, 12-24 V, 300\/310 MHz), 109920 (1-channel, 115 VAC plug-in transformer, 300 MHz), 109020 (1-channel garage receiver, 300 MHz), 309013 (1-channel garage receiver, 310 MHz).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Multicode","offers":[{"title":"Default Title","offer_id":21951420611,"sku":"302850","price":66.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/mc_302850.jpg?v=1536876889"},{"product_id":"linear-delta-3-dt-1-channel-visor-transmitter","title":"Linear Delta 3 DT: 1 Channel Visor Transmitter","description":"\u003cp\u003eThe Linear DT (part DNT00002A) is a 1-button, 1-channel Delta-3 visor transmitter on 310 MHz. It has 256 codes set on an 8-position DIP switch and runs on a 9-volt battery. Size is 2.16 in W x 3.75 in H x 0.95 in D.\u003c\/p\u003e\u003cp\u003eA test and operate LED lights during use, and the visor clip is removable. It activates one Delta-3 receiver. Linear's instructions say not to use the factory code, all ON, all OFF or alternating switch patterns. It is also listed as compatible with HomeLink systems and carries a 1-year manufacturer warranty.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDT transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003e9-volt battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear Delta-3 receivers on 310 MHz, such as the DR, GRD and GRD-2.\u003c\/li\u003e\n\u003cli\u003eMake sure your existing remote has 8 DIP switches and runs on 310 MHz. The DT is the same as Linear DTD and DT (DNT00002 or DNT00002A).\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eLinear Delta-3 transmitters: DT (1-channel visor), DT-2A (2-channel visor), DT-4A (4-channel visor), DT3+1 (4-channel gate\/door visor), Mini-T (1-channel key ring), DTKP (keypad), DTG (safety edge).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951423683,"sku":"DNT00002A","price":19.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/DT.jpeg?v=1536876888"},{"product_id":"linear-delta-3-dt-2a-two-btn-remote","title":"Linear Delta 3 DT-2A Two Btn Remote","description":"\u003cp\u003eThe Linear DT-2A (part DNT00017A) is a 2-button, 2-channel Delta-3 visor transmitter on 310 MHz. Each button has its own 8-key DIP code switch with 256 codes, so it can run two Delta-3 receivers on their own. It runs on a 9-volt battery. Size is 2.16 in W x 3.75 in H x 0.95 in D.\u003c\/p\u003e\u003cp\u003eA test and operate LED lights during use, and the visor clip is removable. Linear suggests changing the battery every six months and testing the system at least weekly.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDT-2A transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear Delta-3 receivers on 310 MHz, such as the DR, GRD and GRD-2.\u003c\/li\u003e\n\u003cli\u003eSet switch A and switch B to match the code on each receiver.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eLinear Delta-3 transmitters: DT (1-channel visor), DT-2A (2-channel visor), DT-4A (4-channel visor), DT3+1 (4-channel gate\/door visor), Mini-T (1-channel key ring), DTKP (keypad), DTG (safety edge).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951425155,"sku":"D3 Linear DT","price":25.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/DT-2A.jpeg?v=1536876888"},{"product_id":"linear-delta-3-dt-4a-four-button-remote","title":"Linear Delta 3 DT-4A Four Button Remote","description":"\u003cp\u003eThe Linear DT-4A (part DNT00027B) is a 4-channel Delta-3 visor transmitter on 310 MHz. It has 64 codes set on DIP switches and runs on a 9-volt battery. Size is 2.16 in W x 3.75 in H x 0.95 in D.\u003c\/p\u003e\u003cp\u003eIt can run one 4-channel receiver (DR4), two 2-channel receivers (DR2) or four single-channel receivers (DR, DRQP or DRM). It can also serve as a remote UP, DOWN and STOP control for commercial operators. A test and operate LED and a visor clip are included.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDT-4A transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear Delta-3 receivers on 310 MHz, including the DR4, DR2, DR, DRQP and DRM.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eLinear Delta-3 transmitters: DT (1-channel visor), DT-2A (2-channel visor), DT-4A (4-channel visor), DT3+1 (4-channel gate\/door visor), Mini-T (1-channel key ring), DTKP (keypad), DTG (safety edge).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951426627,"sku":"DT-4A","price":36.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/DT-4A.jpeg?v=1536876888"},{"product_id":"linear-delta-3-dt-3-1-four-btn-transmitter","title":"Linear DT3+1 Four Channel Delta 3 Transmitter","description":"\u003cp\u003eThe Linear DT3+1 (part DNT00027A) is a 4-channel Delta-3 visor transmitter on 310 MHz for common gate access. It has three channels in one section and one separate channel: it runs one DRG gate receiver and up to three Delta-3 door receivers. Codes are set on DIP switches, with 256 independent codes for the gate and 64 multi-channel codes for doors.\u003c\/p\u003e\u003cp\u003eIt runs on one 9-volt battery. A test and operate LED and a visor clip are included. Size is 2.16 in W x 3.75 in H x 0.95 in D.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDT3+1 transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear Delta-3 gate and door receivers on 310 MHz.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eLinear Delta-3 transmitters: DT (1-channel visor), DT-2A (2-channel visor), DT-4A (4-channel visor), DT3+1 (4-channel gate\/door visor), Mini-T (1-channel key ring), DTKP (keypad), DTG (safety edge).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951428419,"sku":"DT3+1","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/DT-3_1.jpeg?v=1536876888"},{"product_id":"linear-delta-3-mini-t-ladybug-transmitter","title":"Linear Delta 3 Mini-T Ladybug Transmitter LB-1","description":"\u003cp\u003eThe Linear Mini-T (part DNT00026) is a 1-channel Delta-3 key ring transmitter on 310 MHz. It has 256 codes set on DIP switches and runs on a 12-volt battery. Size is 2.2 in x 1.42 in x 0.66 in.\u003c\/p\u003e\u003cp\u003eIt has a black case, white button and a test and operate LED. A key ring is supplied. It activates one Delta-3 receiver.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMini-T transmitter\u003c\/li\u003e\n\u003cli\u003eKey ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear Delta-3 receivers on 310 MHz, such as the DR, GRD and GRD-2.\u003c\/li\u003e\n\u003cli\u003eSet the DIP switches to match the receiver code.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eLinear Delta-3 transmitters: DT (1-channel visor), DT-2A (2-channel visor), DT-4A (4-channel visor), DT3+1 (4-channel gate\/door visor), Mini-T (1-channel key ring), DTKP (keypad), DTG (safety edge).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951429955,"sku":"D3 LB","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/DNT00026.jpg?v=1698176121"},{"product_id":"linear-delta-3-dtkp-keypad","title":"Linear Delta 3 DTKP Keypad","description":"\u003cp\u003eThe Linear DTKP (part DNT00062) is a Delta-3 wireless keypad transmitter on 310 MHz for garage door and gate operators. It uses the Delta-3 format with 256 codes. The PIN matches the receiver's ON DIP switch positions, so it is 1 to 8 digits long. It runs on one 9-volt alkaline or lithium battery, rated by Linear up to 5 years.\u003c\/p\u003e\u003cp\u003eThe keys are backlit. It mounts to a wall with two supplied screws and anchors at least 5 ft above the ground, and plugs cover the screw heads. Size is 2.5 in W x 7.5 in H x 0.875 in D. It can activate multiple Delta-3 receivers.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDTKP keypad\u003c\/li\u003e\n\u003cli\u003eMounting screws, anchors and screw plugs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear Delta-3 receivers on 310 MHz, such as the DR, GRD and GRD-2.\u003c\/li\u003e\n\u003cli\u003eThe PIN is set by the receiver's DIP switch code; digits are entered in descending order and keys 0 and 9 are not used.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eLinear Delta-3 transmitters: DT (1-channel visor), DT-2A (2-channel visor), DT-4A (4-channel visor), DT3+1 (4-channel gate\/door visor), Mini-T (1-channel key ring), DTKP (keypad), DTG (safety edge).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951430595,"sku":"DTKP","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/DTKP.jpg?v=1698175862"},{"product_id":"linear-delta-3-dr-radio-receiver","title":"Linear Delta 3 DR Radio Receiver","description":"\u003cp\u003eThe Linear DR (part DNR00001) is a 1-channel, three-terminal Delta-3 receiver on 310 MHz. It runs on 24 VAC or VDC and has 256 codes set on an 8-position DIP switch.\u003c\/p\u003e\u003cp\u003eA mounting clip screws to the surface and the receiver snaps onto it. A wire lead antenna is attached. Where the operator does not supply 24 VAC, the Linear Model 524 transformer plugs into a 110 VAC outlet. Size is 5.5 in W x 4 in H x 1.25 in D. Linear says to keep receivers at least 5 ft apart.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDR receiver\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear Delta-3 transmitters and keypads on 310 MHz.\u003c\/li\u003e\n\u003cli\u003eFor 12 V systems, see the DRA.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eRelated Linear Delta-3 receivers: DR (1-channel, 24 V), DRA (1-channel, 12 V), DR-4 and DRA-4 (4-channel), GRD (1-channel gate, 12-30 V).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951430723,"sku":"DNT00001","price":35.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/DR.jpeg?v=1536876887"},{"product_id":"linear-delta-3-dr-4-four-channel-receiver","title":"Linear Delta 3 DR-4 Four Channel Receiver ***Discontinued - Unavailable***","description":"\u003cp\u003eDiscontinued by Linear.\u003c\/p\u003e\u003cp\u003eThe Linear DR-4 is a 4-channel Delta-3 receiver on 310 MHz. It runs on 24 VAC or VDC from the operator or a Linear 524 transformer. Each channel has normally open, common and normally closed contacts, so it can run four devices or UP, DOWN and STOP on a commercial operator.\u003c\/p\u003e\u003cp\u003eCodes are set on an 8-position switch with keys 1 and 2 fixed on the board (64 codes). A wire lead antenna and mounting bracket are included. Linear says to mount receivers at least 8 ft apart. Size is 4.9 in x 1.3 in x 4.2 in.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDR-4 receiver\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFor a 3-button commercial operator, wire the normally open outputs to UP and DOWN and the normally closed output in series with STOP.\u003c\/li\u003e\n\u003cli\u003eWorks with Linear Delta-3 4-channel transmitters such as the DT-4A.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eRelated Linear Delta-3 receivers: DR (1-channel, 24 V), DRA (1-channel, 12 V), DR-4 and DRA-4 (4-channel), GRD (1-channel gate, 12-30 V).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951433283,"sku":"D3 Linear DR4","price":67.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/DR-4.jpeg?v=1536876886"},{"product_id":"linear-delta-3-dra-12v-radio-receiver","title":"Linear Delta 3 DRA 12V Radio Receiver","description":"\u003cp\u003eThe Linear DRA (part DNR00012) is a 1-channel, 12-volt Delta-3 receiver on 310 MHz for commercial gate and door access control. It runs on 12 VAC or VDC and works with solid state control boards. A coded signal from any Delta-3 transmitter switches both normally open and normally closed circuits.\u003c\/p\u003e\u003cp\u003eIt responds to one of 256 digital codes set on DIP switches, and any number of Delta-3 transmitters can run it. A wire lead antenna and mounting bracket are included. Size is 5.5 in x 1.25 in x 4 in.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDRA receiver\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear Delta-3 transmitters and keypads on 310 MHz.\u003c\/li\u003e\n\u003cli\u003eFor 24 V systems, see the DR.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or MegaCode receivers.\u003c\/li\u003e\n\u003cli\u003eRelated Linear Delta-3 receivers: DR (1-channel, 24 V), DRA (1-channel, 12 V), DR-4 and DRA-4 (4-channel), GRD (1-channel gate, 12-30 V).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Delta 3","offers":[{"title":"Default Title","offer_id":21951434115,"sku":"D3 Linear DR","price":41.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/DRA.jpeg?v=1536876886"},{"product_id":"linear-megacode-mct-1-1-channel-visor-transmitter","title":"Linear Megacode MCT-1: 1-Channel Visor Transmitter ***Discontinued***","description":"\u003cp\u003eDiscontinued by Linear. Current Linear MegaCode visor transmitters such as the MTS1 and MDT-1A cover the same use.\u003c\/p\u003e\u003cp\u003eThe Linear MCT-1 is a 1-button MegaCode visor transmitter on 318 MHz. Each unit is factory coded with one of over 1,000,000 codes, and the receiver learns that code during programming. It runs on a 9-volt battery and measures 2.16 in x 0.95 in x 3.75 in.\u003c\/p\u003e\u003cp\u003eA red LED lights while the unit transmits; a dim or dark LED means the battery needs changing. A visor clip is supplied. Linear rates battery life at 12 to 18 months with normal use.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMCT-1 transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear MegaCode receivers and controllers on 318 MHz, such as the MGR and MGR-2 gate receivers, MDR\/U plug-in receiver and AP-5 access controller.\u003c\/li\u003e\n\u003cli\u003ePut the receiver in learn mode, then press the transmitter button to add it. No DIP switches to set.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or Delta-3 DIP switch receivers.\u003c\/li\u003e\n\u003cli\u003eCurrent Linear MegaCode visor transmitters include the MTS1 (1-button), MTS3 (3-button), MDT-1A (1-channel) and MDT-4A (5-channel).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Megacode","offers":[{"title":"Default Title","offer_id":21951434947,"sku":"MCT-1","price":32.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/MCT-1.jpeg?v=1536876886"},{"product_id":"linear-megacode-mct-2-2-channel-visor-transmitter","title":"Linear Megacode MCT-2: 2-Channel Visor Transmitter  ***Discontinued - Limited Stock***","description":"\u003cp\u003eDiscontinued by Linear. Current Linear MegaCode visor transmitters such as the MTS3 and MDT-4A cover multi-button use.\u003c\/p\u003e\u003cp\u003eThe Linear MCT-2 is a 2-button MegaCode visor transmitter on 318 MHz. Each unit is factory coded with one of over 1,000,000 codes. The left button sends code 1, the right button sends code 2, and pressing both sends code 3. It runs on a 9-volt battery and measures 2.16 in x 0.95 in x 3.75 in.\u003c\/p\u003e\u003cp\u003eA red LED lights while the unit transmits; a dim or dark LED means the battery needs changing. A visor clip is supplied. Each button is learned into the receiver one at a time.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMCT-2 transmitter\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear MegaCode receivers and controllers on 318 MHz, such as the MGR and MGR-2 gate receivers, MDR\/U plug-in receiver and AP-5 access controller.\u003c\/li\u003e\n\u003cli\u003ePut the receiver in learn mode, then press each transmitter button you want to add.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or Delta-3 DIP switch receivers.\u003c\/li\u003e\n\u003cli\u003eCurrent Linear MegaCode visor transmitters include the MTS1 (1-button), MTS3 (3-button), MDT-1A (1-channel) and MDT-4A (5-channel).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Megacode","offers":[{"title":"Default Title","offer_id":21951436163,"sku":"MCT-2","price":41.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/MCT-2.jpeg?v=1536876885"},{"product_id":"linear-megacode-mdt-1a-1-channel-visor-transmitter","title":"Linear Megacode MDT-1A: 1-Channel Visor Transmitter","description":"\u003cp\u003eThe Linear MDT-1A (part DNT00052A) is a 1-channel MegaCode visor transmitter on 318 MHz. It has one round button on the front and a small Extra button on top. The top button sends the same signal as the front button. Each unit is factory programmed with one of over 1,000,000 MegaCode codes, and the receiver learns each code, so the transmitter cannot be re-coded to gain access.\u003c\/p\u003e\u003cp\u003eIt runs on two 2032 lithium batteries with up to 5 years of life, and the batteries are included. A high-visibility LED shows operation. A visor clip and a cover for the top button are included. Size is 1.6 in W x 4.2 in H x 0.8 in D.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMDT-1A transmitter\u003c\/li\u003e\n\u003cli\u003eTwo 2032 lithium batteries\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eTop button cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with all Linear access receivers and controllers that use MegaCode.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or Delta-3 DIP switch receivers.\u003c\/li\u003e\n\u003cli\u003eSibling Linear MDT visor transmitters: MDT-1A (1-channel), MDT-2A (3-channel), MDT-4A (5-channel); block coded versions end in B.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Megacode","offers":[{"title":"Default Title","offer_id":21951436227,"sku":"MDT-1","price":34.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/MDT-1A.jpeg?v=1536876885"},{"product_id":"linear-megacode-mdt-4a-5-channel-visor-transmitter","title":"Linear Megacode MDT-4A: 5-Channel Visor Transmitter","description":"\u003cp\u003eThe Linear MDT-4A (part DNT00054A) is a 5-channel MegaCode visor transmitter on 318 MHz. It has four buttons on the front and a small Extra button on top. The four front buttons send channels 1 through 4 and the top button sends channel 5. Each unit is factory programmed with one of over 1,000,000 MegaCode codes, and the receiver learns each code, so the transmitter cannot be re-coded to gain access.\u003c\/p\u003e\u003cp\u003eIt runs on two 2032 lithium batteries with up to 5 years of life, and the batteries are included. A high-visibility LED shows operation. A visor clip and a cover for the top button are included. Size is 1.6 in W x 4.2 in H x 0.8 in D.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMDT-4A transmitter\u003c\/li\u003e\n\u003cli\u003eTwo 2032 lithium batteries\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eTop button cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with all Linear access receivers and controllers that use MegaCode.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or Delta-3 DIP switch receivers.\u003c\/li\u003e\n\u003cli\u003eSibling Linear MDT visor transmitters: MDT-1A (1-channel), MDT-2A (3-channel), MDT-4A (5-channel); block coded versions end in B.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Megacode","offers":[{"title":"Default Title","offer_id":21951436419,"sku":"MDT-4","price":46.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/MDT-4A.jpeg?v=1536876885"},{"product_id":"linear-megacode-mdtk-wireless-keypad-transmitter","title":"Linear Megacode MDTK: Wireless Keypad Transmitter ***Replaced by NMTK***","description":"\u003cp\u003eDiscontinued by Linear. The NMTK is the updated version.\u003c\/p\u003e\u003cp\u003eThe Linear MDTK is a wireless MegaCode keypad transmitter for garage door and gate operators. The user picks a 1 to 6 digit PIN, or a 1 to 6 letter PIN name, and programs it at the keypad; the MegaCode receiver learns the PIN. It runs on one 9-volt alkaline or lithium battery. Size is 7.5 in x 2.5 in x 0.875 in.\u003c\/p\u003e\u003cp\u003eGreen backlighting lights the keys after you press START\/STOP. It wall mounts with two supplied screws and anchors, and screw covers hide the heads. It can be programmed into MDR, MDR-2, MDRG and SMDRG receivers and compatible openers.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMDTK keypad\u003c\/li\u003e\n\u003cli\u003eTwo mounting screws and anchors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe Linear NMTK (DNT00094) also uses a 1 to 6 digit PIN or 1 to 6 letter name and wall mounts with 2 screws and anchors, but runs on 3 AAA batteries and has blue backlit keys.\u003c\/li\u003e\n\u003cli\u003eEach MegaCode receiver stores up to 10 transmitters (40 on gate receivers); the keypad uses one of those slots.\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or Delta-3 DIP switch receivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Megacode","offers":[{"title":"Default Title","offer_id":21951436867,"sku":"MDTK","price":49.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/MDTK.jpeg?v=1536876884"},{"product_id":"linear-megacode-ap-5-wireless-reciever","title":"Linear Megacode AP-5: Wireless Receiver","description":"\u003cp\u003eThe Linear AP-5 (part ACP00953) is a wireless access controller for one or two doors or gates. It can run door strikes, mag-locks, barrier gates, automatic gates or door operators. A built-in high-gain superheterodyne receiver on 318 MHz reaches up to 500 ft with an external antenna. It runs on 12-24 V AC or DC, 250 mA max.\u003c\/p\u003e\u003cp\u003eIt stores up to 480 Linear MegaCode transmitters, up to 238 transmitter blocks and up to six MGT supervised safety edge transmitters, with memory kept without power. Three Form C dry-contact relays rated 1 A each handle access, access or obstacle, and obstacle. Relays work timed or latch-on\/latch-off, and the toggle state survives a power loss. OPEN REQUEST terminals take a pushbutton or key switch. If an MGT reports a fault, it beeps every 5 seconds. Size is 4.5 in W x 6 in H x 1.5 in D; operating range is -22 to 158 °F.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Linear MegaCode transmitters and MDKP or MDTK keypads.\u003c\/li\u003e\n\u003cli\u003eSupervised safety edge monitoring needs the Linear MGT gate safety edge transmitter, sold separately.\u003c\/li\u003e\n\u003cli\u003eMount it out of the weather, or inside a metal cabinet with an external antenna (Linear EXA-1000 or EXA-2000).\u003c\/li\u003e\n\u003cli\u003eDoes not work with Linear Multi-Code or Delta-3 DIP switch receivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear Megacode","offers":[{"title":"Default Title","offer_id":21951436995,"sku":"ACP00953","price":98.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/AP-5.jpeg?v=1536876884"},{"product_id":"ak-11-linear-exterior-keypad","title":"Linear AK-11 Linear Exterior Keypad","description":"\u003cp\u003eThe Linear AK-11 is a stand-alone exterior digital keypad for gate, door and garage access control. It runs on 12 to 24 VAC or VDC and stores up to 480 entry codes of 1 to 6 digits. A main Form C relay (5 A) and an auxiliary Form C relay (1 A) control the gate operator, strike or lock directly, with no separate controller needed.\u003c\/p\u003e\u003cp\u003eThe keypad has a cast aluminum housing with a neoprene gasket and a key lock that holds it to the mounting backplate. Two solid-state outputs can be set for forced entry, door ajar, keypad lockout, keypad active or alarm shunt. A request-to-exit input and a sense input are built in. A courtesy light turns on when a key is pressed. Rated for indoor or outdoor use from -22°F to 149°F.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePower: 12 to 24 VAC or VDC, 150 mA maximum. An AC supply must be isolated from the device it controls.\u003c\/li\u003e\n\u003cli\u003eMounts on a wall or a pedestal. A gooseneck such as the Linear GNB-1 is sold separately.\u003c\/li\u003e\n\u003cli\u003eRelay ratings are 5 A (main) and 1 A (auxiliary) at 28 V maximum.\u003c\/li\u003e\n\u003cli\u003eNeed a keypad with a built-in MegaCode receiver? See the AKR-1 (discontinued). For a battery-powered wireless keypad, see the MDKP.\u003c\/li\u003e\n\u003cli\u003eOrder number: ACP00748.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951439683,"sku":"ACP00748","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/AK-11.jpg?v=1536876883"},{"product_id":"mdkp-wireless-keypad","title":"Linear MDKP Wireless Keypad","description":"\u003cp\u003eThe Linear MDKP is a battery-powered wireless keypad that sends a 318 MHz MegaCode signal to a Linear receiver or access controller. Each 1 to 6 digit PIN sends its own transmitter code, so the receiver can add or delete users one at a time. Range is up to 250 ft line of sight. No wiring is run to the keypad.\u003c\/p\u003e\u003cp\u003eThe user enters a PIN and presses #. Pressing # twice turns on the downlight for 30 seconds or until a code is sent. The keypad has a cast aluminum housing and an internal antenna, and runs on one 9 V lithium battery.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMDKP keypad\u003c\/li\u003e\n\u003cli\u003e9 V lithium battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequires a Linear MegaCode receiver or access controller to learn the PIN codes. The number of codes you can use depends on that receiver.\u003c\/li\u003e\n\u003cli\u003eMounts on a wall or a gooseneck. Gooseneck sold separately.\u003c\/li\u003e\n\u003cli\u003eRange is up to 250 ft line of sight. Walls, gates and metal reduce it. A remote antenna (EXA-1000 or EXA-2000) on the receiver can help.\u003c\/li\u003e\n\u003cli\u003eNeed a hardwired stand-alone keypad with its own relays? See the AK-11.\u003c\/li\u003e\n\u003cli\u003eOrder number: ACP00878.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951441091,"sku":"ACP00878","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/mdkp_eb578307-4e3f-457b-9b09-459d6a985b8e.jpg?v=1607986922"},{"product_id":"971lm-single-button-remote","title":"LiftMaster 971LM Single Button Remote","description":"\u003cp\u003eThe LiftMaster 971LM is a 1-button Security+ rolling code remote control on 390 MHz. It programs to LiftMaster garage door openers with a Red or Orange learn button and to the LiftMaster 412HM universal receiver.\u003c\/p\u003e\u003cp\u003eEach press of the button sends a new rolling code. The remote ships with a directional visor clip and a 3V lithium battery rated for about 5 years.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e971LM 1-button remote control\u003c\/li\u003e\n\u003cli\u003eDirectional visor clip\u003c\/li\u003e\n\u003cli\u003e3V lithium battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the learn button color on your opener before ordering. The 971LM matches Red or Orange learn buttons (Security+ 390 MHz, about 1997 to 2005 per LiftMaster).\u003c\/li\u003e\n\u003cli\u003ePurple learn button openers use the 371LM (Security+ 315 MHz).\u003c\/li\u003e\n\u003cli\u003eYellow learn button (Security+ 2.0) openers need a Security+ 2.0 remote such as the 891LM, or a MAX remote such as the 893MAX or 890MAX.\u003c\/li\u003e\n\u003cli\u003eFor gates, the 971LM works with the 412HM receiver (Security+ 390 MHz).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Liftmaster","offers":[{"title":"Default Title","offer_id":21951444867,"sku":"971LM","price":33.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/971lm.jpg?v=1539105493"},{"product_id":"sarasota-625x-lv-loop-detector","title":"Sarasota 625X Loop Detector  12-24vac\/dc","description":"\u003ch4\u003eDescription\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp class=\"sm\"\u003eThe 625X detector is a single-channel inductive loop vehicle detector that provides vehicle presence information required by gate operators, ticket spitters, card readers, etc. Although compact and lightweight, the 625X is designed to operate in the most demanding high volume access control installations in all environmental conditions. The 625X detector does not sacrifice features for the evolutionary reduction of size.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"sm\"\u003eTwo outputs are available: one to provide the presence of a vehicle over the loop, the second is switch selectable to provide pulse on entry of the loop, pulse on exiting the loop, a second presence output or a loop fault output. Easy-to- use front panel slide switches provide positive identification of frequency and sensitivity settings.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFailsafe or failsecure outputs\u003c\/li\u003e\n\u003cli\u003eFour selectable sensitivities\u003c\/li\u003e\n\u003cli\u003ePulse on entry and exit\u003c\/li\u003e\n\u003cli\u003eSecond presence output\u003c\/li\u003e\n\u003cli\u003eLoop fault output\u003c\/li\u003e\n\u003cli\u003eGalvanic separation of loop and detector electronics\u003c\/li\u003e\n\u003cli\u003eAutomatic tuning\u003c\/li\u003e\n\u003cli\u003eConstant readjustment of frequency to avoid environmental impacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 3\" H x 1.5\" W x 2.8\" L (76 x 38 x 71 mm)\u003c\/li\u003e\n\u003cli\u003eSupply Power: 10-30 V AC\/DC\u003c\/li\u003e\n\u003cli\u003eFrequency Range: 30 to 130 kHz\u003c\/li\u003e\n\u003cli\u003eInductance: 20 to 700 μ\u003cspan\u003eH\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eTemperature range: \u003c\/span\u003e\u003cspan\u003e-35\u003c\/span\u003e°\u003cspan\u003eF to 158\u003c\/span\u003e°\u003cspan\u003eF   (-37\u003c\/span\u003e°C to 70°C)\u003c\/li\u003e\n\u003cli\u003eWeight: 5.8 oz (165 grams)\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS plastic\u003c\/li\u003e\n\u003cli\u003eConnection: 11 pin male\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Information\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cform action=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/loop_install_guide.pdf?1645050349120890010\" method=\"Get\"\u003e\u003cbutton class=\"btn\" type=\"submit\"\u003eLoop Install Guide\u003cspan\u003e \u003c\/span\u003e\u003c\/button\u003e\u003c\/form\u003e\u003cform action=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/loop_installation_guidelines.pdf?1645050349120890010%22\" method=\"Get\"\u003e\u003cbutton class=\"btn\" type=\"submit\"\u003eLoop Installation Guidelines\u003cspan\u003e \u003c\/span\u003e\u003c\/button\u003e\u003c\/form\u003e\u003cform action=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/LoopSizes.pdf?3158443000636428019\" method=\"Get\"\u003e\u003cbutton class=\"btn\" type=\"submit\"\u003eSize Chart\u003cspan\u003e \u003c\/span\u003e\u003c\/button\u003e\u003c\/form\u003e\n\u003cdiv id=\"awebChromeHelper\"\u003e\u003c\/div\u003e","brand":"Sarasota","offers":[{"title":"Default Title","offer_id":21951456323,"sku":"PT 625X-LV","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/625X_124e8c9a-6bea-405e-b2fa-cf2b3b680451.png?v=1672351657"},{"product_id":"omron-e3k-r10k4-long-range-photoelectric-sensor-with-reflector","title":"Omron E3K (R10K4) Long Range Photoelectric Sensor with Reflector","description":"\u003cp\u003eOmron E3K-R10K4 is a long-range retro-reflective photoelectric sensor with reflector. Sensing distance is 10 m (32.8 ft). Omron lists it for door control and material handling.\u003c\/p\u003e\u003cp\u003eUniversal supply: 24 to 240 VAC or 12 to 240 VDC. DPDT relay output rated 10 A. Wires to a terminal strip. Mutual interference protection lets two sensors mount near each other.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eE3K sensor\u003c\/li\u003e\n\u003cli\u003eReflector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRetro-reflective: sensor on one side, reflector on the other, with clear line of sight.\u003c\/li\u003e\n\u003cli\u003eWire the relay contacts to the photo eye input on the gate or door operator.\u003c\/li\u003e\n\u003cli\u003eCheck that your operator accepts a relay (dry contact) photo eye.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Omron","offers":[{"title":"Default Title","offer_id":21951456835,"sku":"OM E3K","price":172.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG_2716_1.jpg?v=1701357621"},{"product_id":"412hm-univeral-coaxial-receiver","title":"LiftMaster 412HM Universal Coaxial Receiver","description":"\u003cp\u003eThe LiftMaster 412HM is a universal coaxial receiver for Security+ 390 MHz rolling code remotes. It also accepts Billion Code and DIP switch remotes. Power input is 12 VDC or 18 to 35 VAC, jumper selectable.\u003c\/p\u003e\u003cp\u003eIn normal security mode the receiver stores up to 31 LiftMaster remotes. In high security mode it stores up to 18 Security+ remotes. The coaxial antenna connection allows remote antenna mounting with the 86LM kit.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRemotes listed by LiftMaster for the 412HM: 971LM and other 970-series Security+ 390 MHz remotes, plus the 890MAX, 893MAX and 878MAX keypad as replacements.\u003c\/li\u003e\n\u003cli\u003eFor Security+ 315 MHz remotes use the 312HM receiver. For Security+ 2.0 remotes (891LM, 893LM, 811LM, 892LT, 894LT) use the 850LM.\u003c\/li\u003e\n\u003cli\u003eSet the power jumper to match your supply (12 VDC or 18 to 35 VAC) before connecting.\u003c\/li\u003e\n\u003cli\u003eRemote antenna mounting needs the 86LM kit (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Liftmaster","offers":[{"title":"Default Title","offer_id":21951468931,"sku":"412HM","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/412HM.jpeg?v=1539105488"},{"product_id":"elite-a-79-loop-detector","title":"Elite A-79 Loop Detector","description":"\u003cp\u003eThe Elite A-79 is a vehicle loop detector that runs on 115 VAC. It connects to a buried inductive loop and signals the gate operator when a vehicle is over the loop.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePower: 115 VAC. Confirm the operator supplies 115 VAC to the detector.\u003c\/li\u003e\n\u003cli\u003eCheck the connector and mounting on your existing detector before ordering.\u003c\/li\u003e\n\u003cli\u003eLoops are sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elite","offers":[{"title":"Default Title","offer_id":21951471107,"sku":"A-79","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/Elite_20A-79.jpeg?v=1465925479"},{"product_id":"emx-irb-325-photo-electric-beam-with-hoods","title":"EMX IRB-325 Photoeye with Hoods","description":"\u003cp\u003eThe EMX IRB-325 is a thru-beam infrared photoeye kit for automatic gates and doors. It is a UL 325 Type B1 non-contact external entrapment protection device with a range of up to 65 ft and runs on 12-24 VDC or VAC.\u003c\/p\u003e\u003cp\u003eThe receiver signals the operator when the beam is broken. Output is a Form C relay (NO, COM, NC) rated 1 A at 30 VDC, and the unit is set up for normally closed (NC) monitoring. The housing is NEMA 4X and is rated for -40° to 170°F. Each unit measures 3.2 x 3.06 x 5.03 in.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTransmitter\u003c\/li\u003e\n\u003cli\u003eReceiver\u003c\/li\u003e\n\u003cli\u003eProtective hoods\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePower: 12-24 VDC or VAC, 150 mA with the relay energized.\u003c\/li\u003e\n\u003cli\u003eMonitoring is normally closed (NC). Check that your operator accepts an NC monitored photoeye on its entrapment input.\u003c\/li\u003e\n\u003cli\u003eMounting post: 325-POST-2. For an enclosed install, see the EMX Photoeye Vault.\u003c\/li\u003e\n\u003cli\u003eMount the transmitter and receiver facing each other across the area to be protected, per the operator manual and UL 325.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMX","offers":[{"title":"Default Title","offer_id":21951472003,"sku":"IRB-325","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG_2759.jpg?v=1701359442"},{"product_id":"emx-nir-reflective-photobeam-with-reflector","title":"EMX NIR Reflective Photobeam with Reflector","description":"\u003cp\u003eThe EMX NIR is a retro-reflective infrared photoeye for commercial overhead doors, gates and parking barriers. It reads off a reflector up to 30 ft away and accepts 12-240 VDC or 24-240 VAC.\u003c\/p\u003e\u003cp\u003eOne sensor mounts on one side of the opening and the reflector on the other, so only one side needs wiring. Output is a Form C relay (NO, COM, NC) rated 2 A at 24 VDC or 0.6 A at 220 VAC. It has two LED indicators and a sensitivity adjustment. The housing is IP66, comes with a 6 ft lead wire and measures about 2.5 x 1.5 x 0.75 in.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePhotoeye with hood\u003c\/li\u003e\n\u003cli\u003eReflector with hood\u003c\/li\u003e\n\u003cli\u003eMounting bracket with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe NIR is not UL 325 compliant. It will not satisfy a monitored entrapment input on a UL 325 gate operator.\u003c\/li\u003e\n\u003cli\u003ePower: 12-240 VDC or 24-240 VAC. Current draw is 28 mA standby, 15 mA detected at 12 VDC.\u003c\/li\u003e\n\u003cli\u003eRange is 30 ft. For up to 50 ft, see the NIR-50. For a UL 325 10K monitored version, see the NIR-50-325.\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -4° to 140°F.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMX","offers":[{"title":"Default Title","offer_id":21951472451,"sku":"NIR","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/NIR.jpg?v=1697817986"},{"product_id":"miller-edge-me-120-series-connected-edge-w-channel-4ft-section","title":"Miller Edge ME 120 Series Connected Edge w\/ Channel 4ft Section","description":"\u003cp\u003eThe Miller Edge ME120 series-connected edge (ME-120-S) is a 4 ft slide-in sensing edge assembly with mounting channel. It is two 2 ft edges joined by an 18 in connecting wire, with a 2 in lead. On contact, the edge signals the operator to stop or reverse.\u003c\/p\u003e\u003cp\u003eSized for 1-1\/2 in gate surfaces. Mounts vertically or horizontally. Alumaglas contact element inside a sealed, flexible PVC jacket that keeps out dust and debris. Contact rating is 24 V AC\/DC max, 1\/2 A, normally open. Nominal sensitivity is 6-10 lbf. UL 325 Recognized Component. 1-year warranty. Made in USA.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eME120 series-connected edge, 4 ft total (2 ft edge, 18 in connecting wire, 2 ft edge)\u003c\/li\u003e\n\u003cli\u003eMounting channel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTransmitter and receiver are not included. For a non-monitored wireless setup, use the MWT12B transmitter with an MWR12B or MWR22B receiver.\u003c\/li\u003e\n\u003cli\u003eThis listing does not state a 10K monitored termination. For a 10K monitored ME120, see the ME-120-4-2016 or ME-120-5-2016.\u003c\/li\u003e\n\u003cli\u003eSingle-piece ME120 sizes: ME-120-4 (4 ft) and ME-120-5 (5 ft).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miller Edge","offers":[{"title":"Default Title","offer_id":21951475203,"sku":"ME-120-S","price":169.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/SafetyEdge.jpeg?v=1465925482"},{"product_id":"miller-edge-transmitter-and-receiver-combo","title":"Miller Edge Transmitter and Receiver Combo MWRT12B","description":"\u003cp\u003eThe Miller Edge MWRT12B is a single-channel wireless edge kit with an MWT12B transmitter and an MWR12B receiver. The transmitter connects to a 2-wire N.O. sensing edge and sends the signal to the receiver at the operator, which removes coil cords and reels. The system is non-monitored.\u003c\/p\u003e\u003cp\u003eRange is up to 100 ft in optimal conditions. The receiver runs on 12-24 VAC\/DC and has N.O. and N.C. outputs. The transmitter has a NEMA 4 enclosure and runs on (2) AA batteries. Clear cases and on-board diagnostics help with setup. Current Miller Edge MW models (B suffix) use binary 2-position dipswitches. The installation instructions include a table for pairing them with older trinary 3-position units. 2-year warranty.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMWR12B receiver\u003c\/li\u003e\n\u003cli\u003eMWT12B transmitter\u003c\/li\u003e\n\u003cli\u003e(2) AA alkaline batteries\u003c\/li\u003e\n\u003cli\u003e(4) #6 x 3\/4 in screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNon-monitored system. Miller Edge lists it for door operators made before August 2010 and gate operators made before January 2016. For a monitored gate edge link, see RBand.\u003c\/li\u003e\n\u003cli\u003eLow-battery alarm version: MWRTA12B. Two-channel receiver: MWR22B.\u003c\/li\u003e\n\u003cli\u003eSensing edge sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miller Edge","offers":[{"title":"Default Title","offer_id":21951476931,"sku":"MWRT12B","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/MWRT12B.jpg?v=1740431029"},{"product_id":"miller-edge-transmitter","title":"Miller Edge MWT12B Wireless Edge Transmitter","description":"\u003cp\u003eThe Miller Edge MWT12B is a battery-powered wireless sensing edge transmitter. It sends the edge signal to an MW receiver at the operator, which removes coil cords and reels. The system is non-monitored. Formerly the MWT12.\u003c\/p\u003e\u003cp\u003eThe transmitter takes a 2-wire N.O. sensing edge input and runs on (2) AA batteries with a 2-year life expectancy. It has a NEMA 4 weatherproof enclosure with a clear case for troubleshooting. Frequency is 318 MHz. Range is up to 100 ft in optimal conditions. Operating temperature is 0°F to 130°F. Dimensions are 1-13\/16 W x 5-3\/4 H x 1-3\/4 D in. On-board diagnostics. 2-year warranty.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePairs with the MWR12B single-channel receiver or the MWR22B two-channel receiver. Kit with receiver: MWRT12B.\u003c\/li\u003e\n\u003cli\u003eNon-monitored system. Miller Edge lists it for door operators made before August 2010 and gate operators made before January 2016. For a monitored gate edge link, see RBand.\u003c\/li\u003e\n\u003cli\u003eCurrent Miller Edge MW models (B suffix) use binary 2-position dipswitches. The installation instructions include a table for pairing them with older trinary 3-position units.\u003c\/li\u003e\n\u003cli\u003eLow-battery alarm version: MWTA12B.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miller Edge","offers":[{"title":"Default Title","offer_id":21951479683,"sku":"MWT12B","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/me_transmitter.jpg?v=1470087314"},{"product_id":"miller-edge-mwr12-receiver","title":"Miller Edge MWR12B Receiver","description":"\u003cp\u003eThe Miller Edge MWR12B is a single-channel wireless edge receiver. It mounts at the operator and receives the signal from an MWT12B or MWTA12B transmitter on the sensing edge. The system is non-monitored.\u003c\/p\u003e\u003cp\u003ePower is 12-24 VAC\/DC, about 15 mA with the relay off and 54 mA with the relay on. Outputs are N.O. and N.C. Range is up to 100 ft in optimal conditions. Dimensions are 3-3\/4 W x 4-13\/16 H x 1-1\/4 D in, polycarbonate case with LED indicators. Current Miller Edge MW models (B suffix) use binary 2-position dipswitches. The installation instructions include a table for pairing them with older trinary 3-position units. 2-year warranty.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTransmitter not included. Pair with the MWT12B, or the MWTA12B for a low-battery alarm. Kits: MWRT12B and MWRTA12B.\u003c\/li\u003e\n\u003cli\u003eNon-monitored system. Miller Edge lists it for door operators made before August 2010 and gate operators made before January 2016. For a monitored gate edge link, see RBand.\u003c\/li\u003e\n\u003cli\u003eTwo-channel receiver: MWR22B.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miller Edge","offers":[{"title":"Default Title","offer_id":21951480387,"sku":"MWR12B","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/MWR12B.png?v=1771960023"},{"product_id":"northstar-np2-loop-detector","title":"Northstar NP2 Loop Detector 110vac","description":"\u003cp\u003eSingle Channel-Dual Relay Inductive Loop Vehicle Detector\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Northstar Controls, LLC","offers":[{"title":"Default Title","offer_id":21951485443,"sku":"NP2110","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/NP2.webp?v=1698342448"},{"product_id":"pbs-1-single-button-control-station","title":"PBS-1 Single Button Control Station","description":"\u003cp\u003eThe PBS-1 is a single-button control station in a NEMA 1 metal enclosure for indoor surface mounting. The button is a momentary, normally open contact. The station measures 2-7\/8 in H x 2-3\/8 in W x 1-13\/16 in D. This model is also listed as the 1B.\u003c\/p\u003e\u003cp\u003eUse it inside a building, next to a commercial door or at an interior gate or barrier position. It is a 2-wire station: it wires to the operator's single-button (open\/close\/stop sequence) input and common.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle push button\u003c\/li\u003e\n\u003cli\u003eMomentary, normally open contact\u003c\/li\u003e\n\u003cli\u003eNEMA 1 metal enclosure for indoor use\u003c\/li\u003e\n\u003cli\u003eFully guarded button\u003c\/li\u003e\n\u003cli\u003eSurface mount\u003c\/li\u003e\n\u003cli\u003eUL listed components\u003c\/li\u003e\n\u003cli\u003eButton rating 5 A at 120 VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck that your operator accepts a single-button command input. Most commercial door operators need separate open, close and stop inputs.\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is for indoor locations only. For outdoor use, see the 1BX (metal) or 1BXT (non-metallic).\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model.\u003c\/li\u003e\n\u003cli\u003eRun 2 conductors: button and common.\u003c\/li\u003e\n\u003cli\u003eNeed more buttons? The PBS-2 is Open \/ Close and the PBS-3 is Open \/ Close \/ Stop.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951485571,"sku":"PBS-1","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/pbs-1.jpg?v=1470339420"},{"product_id":"pbs-2-open-close-control-station","title":"PBS-2 Open \/ Close Control Station","description":"\u003cp\u003eThe PBS-2 is a 2-button Open \/ Close control station in a NEMA 1 metal enclosure for indoor surface mounting. Both buttons are momentary, normally open contacts. The station measures 4-1\/16 in H x 2-3\/8 in W x 1-13\/16 in D. This model is also listed as the 2B.\u003c\/p\u003e\u003cp\u003eUse it inside a building, next to a commercial door or at an interior gate or barrier position. It wires to the operator's open and close terminals plus common. There is no stop button on this model.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOpen and Close push buttons\u003c\/li\u003e\n\u003cli\u003eMomentary, normally open contacts\u003c\/li\u003e\n\u003cli\u003eNEMA 1 metal enclosure for indoor use\u003c\/li\u003e\n\u003cli\u003eFully guarded buttons\u003c\/li\u003e\n\u003cli\u003eSurface mount\u003c\/li\u003e\n\u003cli\u003eUL listed components\u003c\/li\u003e\n\u003cli\u003eButton rating 5 A at 120 VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo stop button. If your operator needs a stop input or a jumper is not allowed, order the PBS-3 (normally closed stop) or PBS-3R (normally open stop).\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is for indoor locations only. For outdoor use, see the 2BX (metal) or 2BXT (non-metallic).\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model.\u003c\/li\u003e\n\u003cli\u003eRun 3 conductors: open, close and common.\u003c\/li\u003e\n\u003cli\u003eNeed a single button? See the PBS-1.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951485699,"sku":"PBS-2","price":25.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/pbs-2.jpg?v=1470339458"},{"product_id":"pbs-3-open-close-stop-control-station-nc-stop-circuit","title":"PBS-3 Open \/ Close \/ Stop Control Station (NC Stop Circuit)","description":"\u003cp\u003eThe PBS-3 is a 3-button Open \/ Close \/ Stop control station in a NEMA 1 metal enclosure for indoor surface mounting. All three buttons are momentary. Open and Close are normally open contacts. Stop is a normally closed contact. The station measures 5-5\/16 in H x 2-3\/8 in W x 1-13\/16 in D. This model is also listed as the 3B.\u003c\/p\u003e\u003cp\u003eUse it inside a building, next to a commercial door or at an interior gate or barrier position. It wires to the operator's open, close and stop terminals plus common. The stop button opens the circuit when pressed, so the operator must expect a normally closed stop input.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOpen, Close and Stop push buttons\u003c\/li\u003e\n\u003cli\u003eMomentary contacts\u003c\/li\u003e\n\u003cli\u003eNormally open Open and Close, normally closed Stop\u003c\/li\u003e\n\u003cli\u003eNEMA 1 metal enclosure for indoor use\u003c\/li\u003e\n\u003cli\u003eFully guarded buttons\u003c\/li\u003e\n\u003cli\u003eKnockouts for conduit entry\u003c\/li\u003e\n\u003cli\u003eUL listed components\u003c\/li\u003e\n\u003cli\u003eButton rating 5 A at 120 VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck your operator's stop input. This station has a normally closed stop. For an operator that needs a normally open stop circuit, order the PBS-3R.\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is for indoor locations only. For outdoor or washdown areas, use a NEMA 4 or 4X station such as the 3BX or 3B4X.\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model. For key lockout, see the 3BXL or 3BFL.\u003c\/li\u003e\n\u003cli\u003eRun 4 conductors: open, close, stop and common.\u003c\/li\u003e\n\u003cli\u003eNeed fewer buttons? The PBS-2 is Open \/ Close and the PBS-1 is a single button.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951485955,"sku":"PBS-3","price":26.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/pbs-3.jpg?v=1470339503"},{"product_id":"pbs-3r-open-close-stop-no-stop-circuit","title":"PBS-3R Open \/ Close \/ Stop (NO Stop Circuit)","description":"\u003cp\u003eThe PBS-3R is a 3-button Open \/ Close \/ Stop control station in a NEMA 1 metal enclosure for indoor surface mounting. All three buttons are momentary, normally open contacts, including Stop. The station measures 5-5\/16 in H x 2-3\/8 in W x 1-13\/16 in D. This model is also listed as the 3BU.\u003c\/p\u003e\u003cp\u003eUse it inside a building, next to a commercial door or at an interior gate or barrier position. It wires to the operator's open, close and stop terminals plus common. The stop button closes the circuit when pressed, so the operator must expect a normally open stop input.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOpen, Close and Stop push buttons\u003c\/li\u003e\n\u003cli\u003eMomentary contacts\u003c\/li\u003e\n\u003cli\u003eNormally open Open, Close and Stop\u003c\/li\u003e\n\u003cli\u003eNEMA 1 metal enclosure for indoor use\u003c\/li\u003e\n\u003cli\u003eFully guarded buttons\u003c\/li\u003e\n\u003cli\u003eSurface mount\u003c\/li\u003e\n\u003cli\u003eUL listed components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck your operator's stop input. This station has a normally open stop. For an operator that needs a normally closed stop circuit, order the PBS-3.\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is for indoor locations only. For outdoor or washdown areas, use a NEMA 4 or 4X station such as the 3BX or 3B4X.\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model. For key lockout, see the 3BXL or 3BFL.\u003c\/li\u003e\n\u003cli\u003eRun 4 conductors: open, close, stop and common.\u003c\/li\u003e\n\u003cli\u003eNeed fewer buttons? The PBS-2 is Open \/ Close and the PBS-1 is a single button.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951486019,"sku":"PBS-3R","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/pbs-3_31301f0c-037a-4bd3-b240-bebb1076aaff.jpg?v=1470339679"},{"product_id":"pbc-1-single-button-control-station","title":"PBC-1 Single Button Control Station","description":"\u003cp\u003eThe PBC-1 is a single-button control station with a stainless steel faceplate for indoor flush mounting in a single-gang box. It is rated NEMA 1. The button is a momentary, normally open contact. The faceplate measures 4-1\/4 in H x 2-3\/4 in W, over a 4 in H x 2 in W back box.\u003c\/p\u003e\u003cp\u003eInstall it flush in a finished wall next to an interior commercial door or at an interior gate or barrier position. It is a 2-wire station: it wires to the operator's single-button (open\/close\/stop sequence) input and common.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle push button\u003c\/li\u003e\n\u003cli\u003eMomentary, normally open contact\u003c\/li\u003e\n\u003cli\u003eStainless steel faceplate\u003c\/li\u003e\n\u003cli\u003eNEMA 1 for indoor use\u003c\/li\u003e\n\u003cli\u003eFlush mount in a single-gang box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFlush mount only. Plan for a single-gang box in the wall.\u003c\/li\u003e\n\u003cli\u003eCheck that your operator accepts a single-button command input. Most commercial door operators need separate open, close and stop inputs.\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is indoor only. For outdoor use, see the NEMA 4 BX series.\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model. For a flush station with key lockout, see the 3BFL.\u003c\/li\u003e\n\u003cli\u003eRun 2 conductors: button and common.\u003c\/li\u003e\n\u003cli\u003eNeed more buttons? The PBC-2 is Open \/ Close and the PBC-3 is Open \/ Close \/ Stop.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951487235,"sku":"PBC-1","price":46.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/pbc-1.jpg?v=1470339146"},{"product_id":"pbc-3-open-close-stop-control-station","title":"PBC-3 - Open \/ Close \/ Stop Control Station","description":"\u003cp\u003eThe PBC-3 is a 3-button Open \/ Close \/ Stop control station with a stainless steel faceplate for indoor flush mounting in a single-gang box. It is rated NEMA 1. All three buttons are momentary. Open and Close are normally open contacts. Stop is a normally closed contact. The faceplate measures 4-1\/4 in H x 2-3\/4 in W, over a 4 in H x 2 in W back box.\u003c\/p\u003e\u003cp\u003eInstall it flush in a finished wall next to an interior commercial door or at an interior gate or barrier position. It wires to the operator's open, close and stop terminals plus common. The stop button opens the circuit when pressed, so the operator must expect a normally closed stop input.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOpen, Close and Stop push buttons\u003c\/li\u003e\n\u003cli\u003eMomentary contacts\u003c\/li\u003e\n\u003cli\u003eNormally open Open and Close, normally closed Stop\u003c\/li\u003e\n\u003cli\u003eButton contacts rated 10 A at 250 VAC\u003c\/li\u003e\n\u003cli\u003eStainless steel faceplate\u003c\/li\u003e\n\u003cli\u003eNEMA 1 for indoor use\u003c\/li\u003e\n\u003cli\u003eFlush mount in a single-gang box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFlush mount only. Plan for a single-gang box in the wall.\u003c\/li\u003e\n\u003cli\u003eCheck your operator's stop input. This station has a normally closed stop. For a normally open stop in a flush station, see the LCE-3A.\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is indoor only. For outdoor use, see the NEMA 4 BX series.\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model. For a flush station with key lockout, see the 3BFL.\u003c\/li\u003e\n\u003cli\u003eRun 4 conductors: open, close, stop and common.\u003c\/li\u003e\n\u003cli\u003eNeed fewer buttons? The PBC-2 is Open \/ Close and the PBC-1 is a single button.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951487427,"sku":"PBC-3","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/pbc-3.jpg?v=1470339239"},{"product_id":"pbc-2-open-close-control-station","title":"PBC-2 - Open \/ Close Control Station","description":"\u003cp\u003eThe PBC-2 is a 2-button Open \/ Close control station with a stainless steel faceplate for indoor flush mounting in a single-gang box. It is rated NEMA 1. Both buttons are momentary, normally open contacts. The faceplate measures 4-1\/4 in H x 2-3\/4 in W, over a 4 in H x 2 in W back box.\u003c\/p\u003e\u003cp\u003eInstall it flush in a finished wall next to an interior commercial door or at an interior gate or barrier position. It wires to the operator's open and close terminals plus common. There is no stop button on this model.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOpen and Close push buttons\u003c\/li\u003e\n\u003cli\u003eMomentary, normally open contacts\u003c\/li\u003e\n\u003cli\u003eStainless steel faceplate\u003c\/li\u003e\n\u003cli\u003eNEMA 1 for indoor use\u003c\/li\u003e\n\u003cli\u003eFlush mount in a single-gang box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFlush mount only. Plan for a single-gang box in the wall.\u003c\/li\u003e\n\u003cli\u003eNo stop button. If your operator needs a stop input or a jumper is not allowed, order the PBC-3 (Open \/ Close \/ Stop).\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is indoor only. For outdoor use, see the NEMA 4 BX series.\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model. For a flush station with key lockout, see the 3BFL.\u003c\/li\u003e\n\u003cli\u003eRun 3 conductors: open, close and common.\u003c\/li\u003e\n\u003cli\u003eNeed a single button? See the PBC-1.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951487811,"sku":"PBC-2","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/pbc-2.jpg?v=1470339194"},{"product_id":"lce-3-open-close-stop-nc-stop-circuit","title":"LCE-3 - Open \/ Close \/ Stop (NC Stop Circuit)","description":"\u003cp\u003eThe LCE-3 is a 3-button Open \/ Close \/ Stop control station with oval buttons for indoor flush mounting in a single-gang box. It is rated NEMA 1. All three buttons are momentary. Open and Close are normally open contacts. Stop is a normally closed contact. The faceplate measures 4-1\/2 in H x 2-3\/4 in W, over a 4-1\/4 in H x 2-1\/2 in W back box.\u003c\/p\u003e\u003cp\u003eInstall it flush in a finished wall next to an interior commercial door or at an interior gate or barrier position. It wires to the operator's open, close and stop terminals plus common. The stop button opens the circuit when pressed, so the operator must expect a normally closed stop input.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOpen, Close and Stop oval push buttons\u003c\/li\u003e\n\u003cli\u003eMomentary contacts\u003c\/li\u003e\n\u003cli\u003eNormally open Open and Close, normally closed Stop\u003c\/li\u003e\n\u003cli\u003eContacts rated 5 A at 125 VAC\u003c\/li\u003e\n\u003cli\u003eNEMA 1 for indoor use\u003c\/li\u003e\n\u003cli\u003eFlush mount in a single-gang box\u003c\/li\u003e\n\u003cli\u003eFully guarded buttons\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck your operator's stop input. This station has a normally closed stop. For an operator that needs a normally open stop circuit, order the LCE-3A.\u003c\/li\u003e\n\u003cli\u003eFlush mount only. Plan for a single-gang box in the wall.\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is indoor only. For outdoor use, see a NEMA 4 station such as the 3BX.\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model. For a flush station with key lockout, see the 3BFL.\u003c\/li\u003e\n\u003cli\u003eRun 4 conductors: open, close, stop and common.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951488323,"sku":"LCE-3","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/lce.jpg?v=1704312125"},{"product_id":"lce-3a-open-close-stop-no-stop-circuit","title":"LCE-3A - Open \/ Close \/ Stop (NO Stop Circuit)","description":"\u003cp\u003eThe LCE-3A is a 3-button Open \/ Close \/ Stop control station with oval buttons for indoor flush mounting in a single-gang box. It is rated NEMA 1. All three buttons are momentary. It matches the LCE-3 except the Close and Stop buttons have double-pole terminals, so the stop can be wired as a normally open circuit. The faceplate measures 4-1\/2 in H x 2-3\/4 in W, over a 4-1\/4 in H x 2-1\/2 in W back box.\u003c\/p\u003e\u003cp\u003eInstall it flush in a finished wall next to an interior commercial door or at an interior gate or barrier position. It wires to the operator's open, close and stop terminals plus common. Use it where the operator expects a normally open stop input.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOpen, Close and Stop oval push buttons\u003c\/li\u003e\n\u003cli\u003eMomentary contacts\u003c\/li\u003e\n\u003cli\u003eDouble-pole terminals on Close and Stop\u003c\/li\u003e\n\u003cli\u003eNormally open stop circuit\u003c\/li\u003e\n\u003cli\u003eNEMA 1 for indoor use\u003c\/li\u003e\n\u003cli\u003eFlush mount in a single-gang box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck your operator's stop input. This station is set up for a normally open stop. For an operator that needs a normally closed stop circuit, order the LCE-3.\u003c\/li\u003e\n\u003cli\u003eFlush mount only. Plan for a single-gang box in the wall.\u003c\/li\u003e\n\u003cli\u003eNEMA 1 is indoor only. For outdoor use, see a NEMA 4 station such as the 3BX.\u003c\/li\u003e\n\u003cli\u003eNo lockout on this model. For a flush station with key lockout, see the 3BFL.\u003c\/li\u003e\n\u003cli\u003eRun 4 conductors: open, close, stop and common.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951488451,"sku":"LCE-3A","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/lce-3_c77b47e9-de2a-44e1-9c0f-414607a35ec5.jpg?v=1470080605"},{"product_id":"3bxl-open-close-stop-exterior-control-station-w-lockout-metal","title":"3BXL Open\/Close\/Stop Exterior Control Station w\/ Lockout (Metal)","description":"\u003cp\u003eThe 3BXL is a 3-button Open \/ Close \/ Stop control station with a keyed lockout in a NEMA 4 metal enclosure. It surface mounts outdoors on a wall, post or column. Buttons are momentary and set in a triangle layout. The enclosure measures 4-3\/8 in H x 4-1\/8 in W x 2-5\/8 in D.\u003c\/p\u003e\u003cp\u003eUse it at exterior door and gate positions where the station must be locked out after hours. The keyswitch lets staff disable the buttons. Wire the open, close and stop contacts to the operator inputs plus common, and plan for the lockout circuit.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOpen, Close and Stop push buttons\u003c\/li\u003e\n\u003cli\u003eKeyed lockout\u003c\/li\u003e\n\u003cli\u003eMomentary contacts\u003c\/li\u003e\n\u003cli\u003eMetal enclosure\u003c\/li\u003e\n\u003cli\u003eNEMA 4 rated for exterior use\u003c\/li\u003e\n\u003cli\u003eSurface mount\u003c\/li\u003e\n\u003cli\u003eUL listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck if your operator needs a normally closed or normally open stop circuit before wiring.\u003c\/li\u003e\n\u003cli\u003eFor the same metal station without lockout, order the 3BX. For a non-metallic housing with lockout, see the 3BXLT.\u003c\/li\u003e\n\u003cli\u003eFor corrosive or washdown areas, see the 3B4XL (NEMA 4X with lockout).\u003c\/li\u003e\n\u003cli\u003eRun 4 conductors for open, close, stop and common, plus the lockout circuit.\u003c\/li\u003e\n\u003cli\u003eNeed 2 buttons or 1? See the 2BX and 1BX.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951488515,"sku":"3BXL","price":199.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/3bxl.jpg?v=1469816566"},{"product_id":"1bx-single-button-exterior-control-metal","title":"1BX Single Button Exterior Control (Metal)","description":"\u003cp\u003eThe 1BX is a single-button control station in a die-cast aluminum enclosure rated NEMA 3R, 4 and 12. It surface mounts outdoors on a wall, post or column. The button is a momentary, normally open contact. The enclosure measures 4-3\/8 in H x 4-1\/8 in W x 2-5\/8 in D.\u003c\/p\u003e\u003cp\u003eMount it at the door opening, on a gate post or at a barrier lane where the station sees rain, dust and hose-down. It is a 2-wire station: it wires to the operator's single-button (open\/close\/stop sequence) input and common.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle push button\u003c\/li\u003e\n\u003cli\u003eMomentary, normally open contact\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum enclosure\u003c\/li\u003e\n\u003cli\u003eNEMA 3R, 4 and 12 rated for exterior use\u003c\/li\u003e\n\u003cli\u003eSurface mount\u003c\/li\u003e\n\u003cli\u003eContacts rated 6 A at 125\/250 VAC\u003c\/li\u003e\n\u003cli\u003eUL listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck that your operator accepts a single-button command input. Most commercial door operators need separate open, close and stop inputs.\u003c\/li\u003e\n\u003cli\u003eFor a non-metallic housing, see the 1BXT. For heavy sun or driving rain, the 1BXC adds a protective cover.\u003c\/li\u003e\n\u003cli\u003eFor corrosive or washdown areas, step up to a NEMA 4X station.\u003c\/li\u003e\n\u003cli\u003eRun 2 conductors: button and common.\u003c\/li\u003e\n\u003cli\u003eNeed more buttons? See the 2BX (Open \/ Close) and 3BX (Open \/ Close \/ Stop).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protec Controls","offers":[{"title":"Default Title","offer_id":21951488771,"sku":"1BX","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/p10-Z-1BX_800.jpg?v=1469811620"}],"url":"https:\/\/www.proteccontrols.com\/collections\/all.oembed?page=169","provider":"Protec Controls","version":"1.0","type":"link"}