{"title":"Linear","description":"\u003cp\u003eLinear gate operators, OSCO replacement parts and access control equipment are grouped on this page. The core of the range is the OSCO line of commercial slide, swing and barrier gate operators, including the HSLG, GSLG-A, VS-GSLG, SWG and BGU families. You will also find Linear Pro swing gate actuator kits, AE-100 and EntryPro telephone entry systems, eMerge access control platforms, keypads, and hundreds of OSCO repair parts listed by part number.\u003c\/p\u003e","products":[{"product_id":"ak-11-linear-exterior-keypad","title":"Linear AK-11 Linear Exterior Keypad","description":"\u003cp\u003eThe Linear AK-11 is a stand-alone exterior digital keypad for gate, door and garage access control. It runs on 12 to 24 VAC or VDC and stores up to 480 entry codes of 1 to 6 digits. A main Form C relay (5 A) and an auxiliary Form C relay (1 A) control the gate operator, strike or lock directly, with no separate controller needed.\u003c\/p\u003e\u003cp\u003eThe keypad has a cast aluminum housing with a neoprene gasket and a key lock that holds it to the mounting backplate. Two solid-state outputs can be set for forced entry, door ajar, keypad lockout, keypad active or alarm shunt. A request-to-exit input and a sense input are built in. A courtesy light turns on when a key is pressed. Rated for indoor or outdoor use from -22°F to 149°F.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePower: 12 to 24 VAC or VDC, 150 mA maximum. An AC supply must be isolated from the device it controls.\u003c\/li\u003e\n\u003cli\u003eMounts on a wall or a pedestal. A gooseneck such as the Linear GNB-1 is sold separately.\u003c\/li\u003e\n\u003cli\u003eRelay ratings are 5 A (main) and 1 A (auxiliary) at 28 V maximum.\u003c\/li\u003e\n\u003cli\u003eNeed a keypad with a built-in MegaCode receiver? See the AKR-1 (discontinued). For a battery-powered wireless keypad, see the MDKP.\u003c\/li\u003e\n\u003cli\u003eOrder number: ACP00748.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951439683,"sku":"ACP00748","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/AK-11.jpg?v=1536876883"},{"product_id":"mdkp-wireless-keypad","title":"Linear MDKP Wireless Keypad","description":"\u003cp\u003eThe Linear MDKP is a battery-powered wireless keypad that sends a 318 MHz MegaCode signal to a Linear receiver or access controller. Each 1 to 6 digit PIN sends its own transmitter code, so the receiver can add or delete users one at a time. Range is up to 250 ft line of sight. No wiring is run to the keypad.\u003c\/p\u003e\u003cp\u003eThe user enters a PIN and presses #. Pressing # twice turns on the downlight for 30 seconds or until a code is sent. The keypad has a cast aluminum housing and an internal antenna, and runs on one 9 V lithium battery.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMDKP keypad\u003c\/li\u003e\n\u003cli\u003e9 V lithium battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequires a Linear MegaCode receiver or access controller to learn the PIN codes. The number of codes you can use depends on that receiver.\u003c\/li\u003e\n\u003cli\u003eMounts on a wall or a gooseneck. Gooseneck sold separately.\u003c\/li\u003e\n\u003cli\u003eRange is up to 250 ft line of sight. Walls, gates and metal reduce it. A remote antenna (EXA-1000 or EXA-2000) on the receiver can help.\u003c\/li\u003e\n\u003cli\u003eNeed a hardwired stand-alone keypad with its own relays? See the AK-11.\u003c\/li\u003e\n\u003cli\u003eOrder number: ACP00878.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951441091,"sku":"ACP00878","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/mdkp_eb578307-4e3f-457b-9b09-459d6a985b8e.jpg?v=1607986922"},{"product_id":"24-volt-ac-dc-dual-tone-buzzer","title":"Linear 24 Volt AC\/DC Dual Tone Buzzer ***Unavailable***","description":"\u003cp\u003e24 Volt AC\/DC Dual Tone Buzzer\u003c\/p\u003e\n\u003cp\u003eIncludes terminals for Pulse and Single Tone Output.\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951533123,"sku":"WA 12D3240","price":59.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/GSLG_20OSC_202500-867.jpeg?v=1536876883"},{"product_id":"2500-1946-motor-board-single-phase-motor-board-only","title":"Linear 2500-1946 Motor Board - Single Phase Motor Board Only","description":"\u003cp\u003eThe Linear 2500-1946 is the single phase motor board for Linear (formerly Osco) gate operators. It replaces the motor board only. The main control board is a separate part.\u003c\/p\u003e\u003cp\u003eThe motor board works with the main control board to run the single phase motor. Replace it when the motor board has failed and the main board is still good.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eSingle phase motor board\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMatch part number 2500-1946 on the old board.\u003c\/li\u003e\n\u003cli\u003eFor single phase operators only. Three phase operators use a different board.\u003c\/li\u003e\n\u003cli\u003eThe main control board is not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951573059,"sku":"2500-1946","price":183.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG_1098.jpg?v=1701368067"},{"product_id":"2510-295-control-board-three-phase-includes-motor-board","title":"Linear  2510-295 Control Board - Three Phase (Includes Motor Board)","description":"\u003cp\u003eThree Phase Control Board for OSCO Gate Operators\u003c\/p\u003e\n\u003cp\u003eThis board will replace the control board in OSCO Three Phase Gate Operators.\u003c\/p\u003e\n\u003cp\u003eIt includes both the main control board and the piggy back motor board.\u003c\/p\u003e\n\u003cp\u003eIt may be necessary to install the chip from your existing control board into the new board.\u003c\/p\u003e\n\u003cp\u003e***All Our Control Boards are NEW, There are no returns on opened OSCO control boards***\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951573187,"sku":"2510-295","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG_1076.jpg?v=1701362057"},{"product_id":"2200-030-limit-nut","title":"Linear 2200-030 Limit Nut","description":"\u003cp\u003eLinear 2200-030 limit nut. The limit nuts ride on the threaded limit shaft in the rotary limit box and trip the open and close limit switches.\u003c\/p\u003e\u003cp\u003eTwo nuts are used per operator, one for open and one for close. This listing is for one nut.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG slide gate operators\u003c\/li\u003e\n\u003cli\u003eGSLG-A slide gate operators\u003c\/li\u003e\n\u003cli\u003eVS-GSLG slide gate operators\u003c\/li\u003e\n\u003cli\u003eSLR and SLC slide gate operators\u003c\/li\u003e\n\u003cli\u003eSL series, SLG, RSLG and SSL slide gate operators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne limit nut\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold individually. Order two to replace both nuts.\u003c\/li\u003e\n\u003cli\u003eMatch part number 2200-030.\u003c\/li\u003e\n\u003cli\u003eReset the open and close limits after install.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951574211,"sku":"2200-030","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG_0485_1.jpg?v=1700168994"},{"product_id":"2100-765-plt-pulley-shaft-10","title":"Linear  2100-765-PLT Pulley Shaft","description":"\u003cp\u003eLinear 2100-765-PLT is the pulley shaft for the Linear (Osco) HSLG slide gate operator. It is part of the intermediate shaft assembly (2110-240).\u003c\/p\u003e\u003cp\u003eThe intermediate shaft assembly also includes the 7 in double pulley (2200-309), 41-B-9 sprocket (2200-213), brake disc (2100-547), 5\/8 in set collar (2200-233) and 5\/8 in precision bearings (2200-215). Replace the shaft when it is bent or the key seats are worn.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLinear lists this part as 2100-765.\u003c\/li\u003e\n\u003cli\u003eCheck the bearings and keys (2200-333, 2100-1750) while the shaft is out.\u003c\/li\u003e\n\u003cli\u003eThe complete intermediate shaft assembly is 2110-240.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951575235,"sku":"2100-765","price":69.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/2110-765.png?v=1567704298"},{"product_id":"2200-213-sprocket-14","title":"Linear 2200-213 Sprocket 41-B-9","description":"\u003cp\u003eThe Linear 2200-213 is a 41-B-9 sprocket with a 5\/8 in bore for the Linear (formerly Osco) HSLG slide gate operator. It is item 14 on the HSLG mechanical parts drawing and mounts on the intermediate shaft.\u003c\/p\u003e\u003cp\u003eReplace it when the teeth are worn or hooked, or when the bore or keyway is damaged.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e#41 chain, 9 teeth, 5\/8 in bore.\u003c\/li\u003e\n\u003cli\u003eCheck the chain for stretch when changing the sprocket.\u003c\/li\u003e\n\u003cli\u003eMatch part number 2200-213 on the HSLG parts list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951575491,"sku":"2200-213","price":24.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-213_6.jpg?v=1688043599"},{"product_id":"2200-309-double-pulley-9","title":"Linear  2200-309 Double Pulley","description":"\u003cp\u003eLinear 2200-309 is a 7 in double pulley for the Linear (Osco) HSLG slide gate operator. It sits on the intermediate shaft and takes the V-belt drive from the motor pulley.\u003c\/p\u003e\n\u003cp\u003eReplace the pulley when the grooves are worn, the hub is cracked or the bore is loose on the shaft. Replace the V-belt at the same time if it is glazed or cracked.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG slide gate operator\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the diameter (7 in) on the old pulley.\u003c\/li\u003e\n\u003cli\u003ePart of intermediate shaft assembly 2110-240 (ref 9 in the HSLG drawing).\u003c\/li\u003e\n\u003cli\u003eKeys, set collars and V-belt are separate parts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951575747,"sku":"2200-309","price":55.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-309_3_8eb07041-4273-46a6-ac27-6402d0d4443c.jpg?v=1688045376"},{"product_id":"2200-233-set-collar-11","title":"Linear 2200-233 Set Collar","description":"\u003cp\u003e5\/8\" Set Collar for OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003ePlease follow the link below to see an exploded view of the HSLG:\u003c\/p\u003e\n\u003cp\u003eClick Here for HSLG EXPLODED VIEW\u003c\/p\u003e\n\u003cform method=\"Get\" action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\"\u003e\n\u003cp\u003e\u003cbutton type=\"submit\" class=\"btn\"\u003e Click for HSLG Manuals and Diagrams\u003c\/button\u003e\u003c\/p\u003e\n\u003cp\u003eItem is marked #11 in Drawing Below (Multiple Locations)\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951576067,"sku":"2200-233","price":9.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/2200-233_9563c1db-7885-4543-9816-0ceb7af1aff5.png?v=1701198428"},{"product_id":"2200-215-precision-bearing-92","title":"Linear 2200-215 Precision Bearing","description":"\u003cp\u003eThe Linear 2200-215 is a 5\/8 in precision bearing for the Linear (formerly Osco) HSLG slide gate operator. It is item 92 on the HSLG mechanical parts drawing.\u003c\/p\u003e\u003cp\u003eThe HSLG uses this bearing on the intermediate shaft and the clutch shaft. Replace it when the bearing is noisy, rough or loose.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBore size is 5\/8 in.\u003c\/li\u003e\n\u003cli\u003eCheck the shaft, set collars and keys for wear while the bearing is out.\u003c\/li\u003e\n\u003cli\u003eMatch part number 2200-215 on the HSLG parts list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951576131,"sku":"2200-215","price":9.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-215_2.jpg?v=1688043773"},{"product_id":"2200-333-key-3-16-x-1-1-2-72","title":"Linear  2200-333 Key (3\/16\" X 1\u00261\/2\")","description":"\u003cp\u003e3\/16\" X 1\u0026amp;1\/2\" Key for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003ePlease follow the link below to see an exploded view of the HSLG:\u003c\/p\u003e\n\u003cp\u003eClick Here for HSLG EXPLODED VIEW\u003c\/p\u003e\n\u003cform method=\"Get\" action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\"\u003e\n\u003cp\u003e\u003cbutton type=\"submit\" class=\"btn\"\u003e Click for HSLG Manuals and Diagrams\u003c\/button\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eItem is marked #72 in Drawings\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951576643,"sku":"2200-333","price":3.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-333_6.jpg?v=1688045611"},{"product_id":"2100-547-brake-disc-12","title":"Linear 2100-547 Brake Disc","description":"\u003cp\u003eThe Linear 2100-547 is the brake disc for the Linear (formerly Osco) HSLG slide gate operator. It is item 12 on the HSLG mechanical parts drawing and is part of the intermediate shaft assembly.\u003c\/p\u003e\u003cp\u003eReplace the disc when it is worn, glazed or damaged and the brake no longer holds the gate.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDisc only. The brake assembly is a separate part.\u003c\/li\u003e\n\u003cli\u003eCheck brake adjustment after installing a new disc.\u003c\/li\u003e\n\u003cli\u003eMatch part number 2100-547 on the HSLG parts list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951578627,"sku":"2100-547","price":24.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-547_4_58d1acd4-b03e-4df7-815b-a92412ceaa06.jpg?v=1687984985"},{"product_id":"2100-1008-plt-clutch-shaft-30","title":"Linear  2100-1008 Clutch Shaft","description":"\u003cp\u003eLinear 2100-1008 is the clutch shaft for the Linear (Osco) HSLG slide gate operator. It is part of the clutch shaft assembly, which carries the clutch hubs, clutch facings, clutch spring and sprockets.\u003c\/p\u003e\n\u003cp\u003eReplace the shaft when it is bent, worn at the bearing or keyway, or the threads for the clutch nuts are damaged. Inspect the clutch hubs, facings and keys while the assembly is apart.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG slide gate operator\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eShaft only. Related clutch parts: 2100-669 pinned clutch hub, 2100-1007 keyed clutch hub, 2400-187 thrust washer, 2400-088 roll pin, 2400-238 key.\u003c\/li\u003e\n\u003cli\u003eCheck the part number against the HSLG parts list (ref 30).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951578883,"sku":"2100-1008","price":78.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/linear-shaft-clutch-hslg-ydichr.jpg?v=1692288000"},{"product_id":"2200-294-sprocket-28","title":"Linear  2200-294 Sprocket 41-A-36","description":"\u003cp\u003eLinear 2200-294 is the 41-A-36 clutch sprocket with a 1 in bore for the Linear (Osco) HSLG slide gate operator. It is part of the clutch shaft assembly (2110-274).\u003c\/p\u003e\u003cp\u003eThe sprocket sits between the two clutch facings (2100-564) and slips when the clutch lets go. It takes #41 chain and has 36 teeth. Replace it when the teeth are worn or the facing surfaces are scored.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eClutch facings (2100-564) are sold separately; HSLG uses two.\u003c\/li\u003e\n\u003cli\u003eCheck the clutch spring (2200-306) and clutch hubs (2100-669, 2100-1007) during service.\u003c\/li\u003e\n\u003cli\u003eReadjust clutch tension after reassembly.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951579011,"sku":"2200-294","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-294_4.jpg?v=1688044968"},{"product_id":"2100-669-clutch-hub-pinned-31","title":"Linear  2100-669-UPS Clutch Hub (Pinned)","description":"\u003cp\u003eLinear 2100-669 is the pinned clutch hub for the Linear (Osco) HSLG slide gate operator. It is one of the two hubs on the clutch shaft that clamp the clutch facings and sprocket.\u003c\/p\u003e\n\u003cp\u003eReplace the hub when the face is scored or warped, or the pin bore is worn. Inspect the clutch facings and roll pin while the clutch is apart, then reset the clutch.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG slide gate operator\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePinned hub (ref 31). The keyed hub is 2100-1007.\u003c\/li\u003e\n\u003cli\u003eRelated clutch parts: 2100-1008 clutch shaft, 2400-088 roll pin, 2400-187 thrust washer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951579203,"sku":"2100-669-UPS","price":36.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-547_7_422abf64-e1c5-4216-8325-fa8ac52e229d.jpg?v=1687985573"},{"product_id":"2100-1007-clutch-hub-keyed-78","title":"Linear  2100-1007 Clutch Hub (Keyed)","description":"\u003cp\u003eLinear 2100-1007 is the keyed clutch hub for the Linear (Osco) HSLG slide gate operator. It is one of the two hubs on the clutch shaft that clamp the clutch facings and sprocket.\u003c\/p\u003e\n\u003cp\u003eReplace the hub when the face is scored or warped, or the keyway is worn. Inspect the clutch facings and key while the clutch is apart, then reset the clutch.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG slide gate operator\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eKeyed hub (ref 78). The pinned hub is 2100-669.\u003c\/li\u003e\n\u003cli\u003eRelated clutch parts: 2100-1008 clutch shaft, 2400-187 thrust washer, 2400-238 key.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951579331,"sku":"2100-1007","price":24.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-547_8_595932a5-37b0-44d1-b742-f64027624f7f.jpg?v=1687985724"},{"product_id":"2100-564-clutch-facing-79","title":"Linear 2100-564 Clutch Facing","description":"\u003cp\u003eLinear 2100-564 is the clutch facing for the Linear (Osco) HSLG slide gate operator. The facings sit on the front and rear of the clutch sprocket (2200-294) on the clutch shaft assembly (2110-274).\u003c\/p\u003e\u003cp\u003eThe facings supply the friction for the slip clutch. Worn or glazed facings let the clutch slip under normal gate load. Replace both facings at the same service.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne clutch facing\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold individually. Each HSLG uses two facings, so order two for a full clutch service.\u003c\/li\u003e\n\u003cli\u003eCheck the clutch sprocket (2200-294) and clutch spring (2200-306) while the clutch is apart.\u003c\/li\u003e\n\u003cli\u003eReadjust clutch tension after installing new facings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951579587,"sku":"2100-564","price":11.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-564_2.jpg?v=1694631585"},{"product_id":"2200-306-clutch-spring-32","title":"Linear 2200-306 Clutch Spring","description":"\u003cp\u003eLinear 2200-306 is the spring used as the clutch spring and the chain tension spring on HSLG slide gate operators. On GSLG-A and VS-GSLG operators it is listed as the tension spring.\u003c\/p\u003e\u003cp\u003eOn the HSLG the same spring sits on the clutch shaft assembly (item 32) and on the chain tension bolt (item 85). Replace it when it is weak, broken or rusted.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG\u003c\/li\u003e\n\u003cli\u003eGSLG-A\u003c\/li\u003e\n\u003cli\u003eVS-GSLG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold as one spring. Count how many you need for clutch and chain tension positions.\u003c\/li\u003e\n\u003cli\u003eClutch shaft assembly (2110-274) includes one 2200-306 spring.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951579907,"sku":"2200-306","price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-306_3_3825789e-275a-4d32-84b1-9403b885e590.jpg?v=1688045209"},{"product_id":"2200-292-sprocket-27","title":"Linear 2200-292 Sprocket 41-B-12","description":"\u003cp\u003eLinear 2200-292 sprocket, 41-B-12, 5\/8 in bore, for the HSLG slide gate operator. It sits on the clutch shaft assembly.\u003c\/p\u003e\u003cp\u003eThis is item 27 on the HSLG parts drawing. Replace it when the teeth are worn or hooked.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG slide gate operators\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMatch part number 2200-292.\u003c\/li\u003e\n\u003cli\u003eCheck the #41 chain and the 3\/16 in key at the same time.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951580547,"sku":"2200-292","price":34.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-292_5_fceb1553-021a-410c-bce3-1d77f4e2aab5.jpg?v=1688044751"},{"product_id":"2400-273-key-3-16-x-1-4-82","title":"Linear 2400-273 Key (3\/16\" X 1\/4\")","description":"\u003cp\u003eLinear 2400-273 is a 3\/16 x 1\/4 in key for HSLG slide gate operators. It is item 82 in the HSLG parts drawing, part of the clutch shaft assembly.\u003c\/p\u003e\u003cp\u003eThe key locks a hub or sprocket to its shaft. Replace it when it is sheared or the fit is loose.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSize: 3\/16 x 1\/4 in.\u003c\/li\u003e\n\u003cli\u003eIncluded in the clutch shaft assembly (2110-274).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951580803,"sku":"2400-273","price":3.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2400-273_9.jpg?v=1688048650"},{"product_id":"2400-238-key-3-16-x-1-1-4-70","title":"Linear  2400-238 Key (3\/16\" X 1\u00261\/4\")","description":"\u003cp\u003eLinear 2400-238 is a 3\/16 in x 1-1\/4 in key for the Linear (Osco) HSLG slide gate operator. It is used in the clutch shaft assembly to lock a sprocket or hub to the shaft.\u003c\/p\u003e\n\u003cp\u003eReplace the key when it is sheared, rounded or loose in the keyway. Check the shaft and hub keyways for wear at the same time.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG slide gate operator\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSize: 3\/16 in x 1-1\/4 in.\u003c\/li\u003e\n\u003cli\u003eShown as ref 70 in the HSLG drawing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951581379,"sku":"2400-238","price":3.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2400-238_6.jpg?v=1688048485"},{"product_id":"2100-917-plt-output-shaft-1-15","title":"Linear 2100-917-UPS Output Shaft (1\") for HSLG","description":"\u003cp\u003eThe Linear 2100-917-UPS is the 1 in output shaft for all Linear (formerly Osco) HSLG slide gate operators. It is item 15 in the HSLG output shaft assembly (2110-236).\u003c\/p\u003e\u003cp\u003eThis is the shaft only. Replace it when the shaft is bent or the keyways are worn.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG (all models)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eShaft only. Sprockets, pillow block bearings, set collars and keys are separate parts.\u003c\/li\u003e\n\u003cli\u003eShaft diameter is 1 in.\u003c\/li\u003e\n\u003cli\u003eThe complete output shaft assembly is 2110-236.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951582467,"sku":"2100-917-UPS","price":63.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG_0533.jpg?v=1701194910"},{"product_id":"2220-022-sprocket-with-bearing-20","title":"Linear  2220-022 Sprocket with Bearing","description":"\u003cp\u003eLinear 2220-022 is the 41-A-24 sprocket with bearing for the Linear (Osco) HSLG slide gate operator. It is part of the output shaft assembly (2110-236).\u003c\/p\u003e\u003cp\u003eThe sprocket rides on the output shaft on its bearing. It takes #41 chain and has 24 teeth. Replace it when the teeth are hooked or the bearing is rough or loose.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e41-A-24 sprocket\u003c\/li\u003e\n\u003cli\u003eBearing (installed)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe bearing alone is 2200-119.\u003c\/li\u003e\n\u003cli\u003eReplace the #41 chain at the same time if it is stretched.\u003c\/li\u003e\n\u003cli\u003eThe complete output shaft assembly is 2110-236.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951583939,"sku":"2220-022","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2220-022_linear-osco-sprocket-_2_15b15520-f189-4eac-a2ac-632a47811f15.jpg?v=1689800551"},{"product_id":"2110-0131-shifter-block-with-pins-21","title":"Linear  2110-131 Shifter Block with Pins","description":"\u003cp\u003eShifter Block with Pins for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cform action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\" method=\"Get\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAttaches to Output Shaft\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951584771,"sku":"2110-131","price":59.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-1737-2110-131-ups_08_42e46c2c-1725-4cad-aebf-6de235261ba2.jpg?v=1692121830"},{"product_id":"2200-274-pillow-block-bearing-1-25","title":"Linear 2200-274 Pillow Block Bearing 1\"","description":"\u003cp\u003eLinear 2200-274 pillow block bearing, 1 in bore. The output shaft runs through these bearings on HSLG slide gate operators.\u003c\/p\u003e\u003cp\u003eThe HSLG uses two of these bearings on the output shaft. Replace them when the shaft has play or the bearing is rough or noisy.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG slide gate operators\u003c\/li\u003e\n\u003cli\u003eGSLG-A slide gate operators\u003c\/li\u003e\n\u003cli\u003eSLR and SLC slide gate operators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne 1 in pillow block bearing\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG operators use two. Order two to replace both.\u003c\/li\u003e\n\u003cli\u003eMatch part number 2200-274.\u003c\/li\u003e\n\u003cli\u003eCheck the output shaft and set collars while the bearings are off.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951588931,"sku":"2200-274","price":122.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-274_7_be225c5f-c82a-40c8-9883-8ebd839cb8d9.jpg?v=1688044178"},{"product_id":"2100-1737-pillow-block-retaining-plate-97","title":"Linear 2100-1737 Pillow Block Retaining Plate","description":"\u003cp\u003ePillow Block Retaining Plate for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cform action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\" method=\"Get\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe have 15 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951591875,"sku":"2100-1737","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-1737_linear-osco-pillow-block_1.jpg?v=1692283798"},{"product_id":"2200-014-set-collar-1-x-3-8-37","title":"Linear 2200-014 Set Collar (1\" X 3\/8\")","description":"\u003cp\u003eSet Collar for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cform action=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/GSLG-A-1.pdf?149\" method=\"Get\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1\" X 3\/8\"\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951594051,"sku":"2200-014","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/2200-014_1b739597-4e7a-4015-9653-c98076968338.png?v=1701198407"},{"product_id":"2200-091-set-collar-1-x-5-8-26","title":"Linear  2200-091 Set Collar (1\" X 5\/8\")","description":"\u003cp\u003eSet Collar for Linear \/ OSCO Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951595715,"sku":"2200-091","price":11.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-0912.jpg?v=1701368257"},{"product_id":"2400-201-key-1-4-x-1-1-2-73","title":"Linear 2400-201 Key (1\/4\" X 1\u00261\/2\")","description":"\u003cp\u003eKey for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cform method=\"Get\" action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\"\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKey is 1\/4\" x 1\u0026amp;1\/2\"\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951596547,"sku":"2400-201","price":8.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2400-201_6.jpg?v=1688048070"},{"product_id":"2110-700-idler-assembly-bracket-and-roller-18","title":"Linear 2110-700 Idler Assembly (Bracket and Roller)","description":"\u003cp\u003eLinear 2110-700 idler assembly with bracket and roller. It guides the main drive chain on HSLG and GSLG-A slide gate operators.\u003c\/p\u003e\u003cp\u003eThe idler sits at the drive chain exit of the operator. Replace it when the roller is worn, seized or the bracket is bent.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG slide gate operators\u003c\/li\u003e\n\u003cli\u003eGSLG-A slide gate operators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIdler bracket\u003c\/li\u003e\n\u003cli\u003eIdler roller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMatch part number 2110-700.\u003c\/li\u003e\n\u003cli\u003eCheck the drive chain for wear when you replace the idler.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951598147,"sku":"2110-700","price":83.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2110-700_5_84acde63-df7b-42b1-9741-fe6ec522f624.jpg?v=1767127804"},{"product_id":"2300-697-idler-wheel-uhmw-17","title":"Linear 2300-697 Idler Wheel, UHMW","description":"\u003cp\u003eLinear 2300-697 is a UHMW plastic idler wheel for Linear (Osco) slide gate operators. It is the wheel in the idler assembly that guides the main drive chain.\u003c\/p\u003e\n\u003cp\u003eReplace it when the wheel is worn, grooved or cracked, or the chain is riding off the idler. Check the idler shaft and chain tension at the same time.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG slide gate operator\u003c\/li\u003e\n\u003cli\u003eGSLG-A slide gate operator\u003c\/li\u003e\n\u003cli\u003eVS-GSLG slide gate operator\u003c\/li\u003e\n\u003cli\u003eSLR slide gate operator\u003c\/li\u003e\n\u003cli\u003eSLC slide gate operator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThis is the wheel only. The complete idler assembly is 2110-700 on the HSLG, GSLG-A and VS-GSLG.\u003c\/li\u003e\n\u003cli\u003eThe idler shaft is a separate part.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951598211,"sku":"2300-697","price":24.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2300-697_3_a4457b91-23b9-4c98-a444-2db71f87b1a3.jpg?v=1688046091"},{"product_id":"2520-173r-rotary-limit-box-assembly-6","title":"Linear  2520-173R Rotary Limit Box Assembly - Switch Lim Assy 2-Sw Rght HSLG","description":"\u003cp\u003eLinear 2520-173R is the rotary limit box assembly, right hand, for the Linear (Osco) HSLG slide gate operator. It sets the open and closed stop points with two threaded nylon limit nuts on a shaft that turns with the operator.\u003c\/p\u003e\n\u003cp\u003eThis assembly is for HSLG units with the older green control boards. Replace it when the limit switches, nuts or shaft are worn or the box is damaged. Reset both limits after installing.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG slide gate operator (older units with green control board)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLimit box and cover\u003c\/li\u003e\n\u003cli\u003eLimit shaft\u003c\/li\u003e\n\u003cli\u003eLimit nuts\u003c\/li\u003e\n\u003cli\u003eTwo limit switches\u003c\/li\u003e\n\u003cli\u003eWiring harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRight hand version (2520-173R). The GSLG-A uses the left hand 2520-173L.\u003c\/li\u003e\n\u003cli\u003eNewer HSLG units use rotary limit box assembly 620-101029.\u003c\/li\u003e\n\u003cli\u003eLimit sprocket and #48 chain are separate parts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951598275,"sku":"2520-173R","price":199.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2520-173l_linear-osco-rotary-limit-box-assembly_05_1800x1800_5af442d4-c014-4ab6-80c1-d7022c38fc04.webp?v=1701892089"},{"product_id":"2500-764-limit-switch","title":"Linear 2500-764 Limit Switch","description":"\u003cp\u003eLinear 2500-764 is the limit switch used in the rotary limit box of Linear (Osco) HSLG, GSLG-A and VS-GSLG slide gate operators. The same switch is used in SWG swing gate operators and BGU \/ BGU-D barrier gate operators.\u003c\/p\u003e\u003cp\u003eLimit nuts on the limit shaft trip the switches to stop the gate at the open and closed positions. Replace a switch that sticks, no longer clicks or no longer stops the gate at its set limit.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG\u003c\/li\u003e\n\u003cli\u003eGSLG-A\u003c\/li\u003e\n\u003cli\u003eVS-GSLG\u003c\/li\u003e\n\u003cli\u003eSWG\u003c\/li\u003e\n\u003cli\u003eBGU\u003c\/li\u003e\n\u003cli\u003eBGU-D\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMatch 2500-764 on the old switch.\u003c\/li\u003e\n\u003cli\u003eMark the wires on the old switch before removing it.\u003c\/li\u003e\n\u003cli\u003eComplete rotary limit boxes are separate parts: 2520-173R (HSLG), 2520-173L (GSLG-A) and 620-101375 (VS-GSLG).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951598467,"sku":"2500-764","price":77.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/2500-764_limit_switch.jpg?v=1536876869"},{"product_id":"2100-261-limit-box-detent-plate","title":"Linear 2100-261 Limit Box Detent Plate","description":"\u003cp\u003eLimit Box Detent Plate for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThere is a 15% restocking fee on OSCO gate operator parts that are returned. Parts that have been used or show wear will not be accepted for returns.\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951598787,"sku":"2100-261","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-261_linear-osco-detent-plate_02_59b400c7-68ca-40bc-a066-b21318ec78be.jpg?v=1692125920"},{"product_id":"2200-654-limit-shaft-chain-48-30-links-8","title":"Linear 2200-654 Limit Shaft Chain (#48 \/ 30 Links)","description":"\u003cp\u003eChain that drives Limit Sprocket on OSCO HSLG Gate Operator\u003c\/p\u003e\n\u003cp\u003e30 Links are included. Some machines will require 27 or 29 links if different limit sprockets are used. Please specify the length you desire in the comments field when you complete your order if you would like us to shorten the chain. Otherwise chain can be adjusted in field with a chain breaker. Master link is sold seperately\u003c\/p\u003e\n\u003cp\u003ePlease follow the link below to see an exploded view of the HSLG:\u003c\/p\u003e\n\u003cp\u003eClick Here for HSLG EXPLODED VIEW\u003c\/p\u003e\n\u003cform method=\"Get\" action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\"\u003e\n\u003cp\u003e\u003cbutton type=\"submit\" class=\"btn\"\u003e Click for HSLG Manuals and Diagrams\u003c\/button\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eDue to the wide range of replacement parts, many items are not stocked and may take 2-3 days before they are shipped. If you need an item shipped next day air please contact us via phone at 262-989-9894 or email us at sales@proteccontrols.com.\u003c\/p\u003e\n\u003cp\u003eThere is a 15% restocking fee on OSCO gate operator parts that are returned. Parts that have been used or show wear will not be accepted for returns.\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951599747,"sku":"2200-654","price":21.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/2220-654.png?v=1567701171"},{"product_id":"2200-202-drive-chain-40-roller-chain-per-ft-34","title":"Linear 2200-202 Drive Chain - #40 Roller Chain (per ft)","description":"\u003cp\u003e#40 Roller Chain for Automatic Gate Operators. Sold by the foot. Adjust quantity to let us know how many feet you would like.\u003c\/p\u003e\n\u003cp\u003eItem is marked #34 in Drawings\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the wide range of replacement parts, many items are not stocked and may take 2-3 days before they are shipped. If you need an item shipped next day air please contact us via phone at 262-989-9894 or email us at sales@proteccontrols.com.\u003c\/p\u003e\n\u003cp\u003eThere is a 15% restocking fee on OSCO gate operator parts that are returned. Parts that have been used or show wear will not be accepted for returns.\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951600003,"sku":"2200-202","price":10.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/Chain_1a24e7e1-aef5-4a86-bc09-ac518df2fed3.jpeg?v=1536876868"},{"product_id":"2400-038-u-bolts-for-operator-mounting-4-5-8-36","title":"Linear 2400-038 U-Bolts for Operator Mounting (4 5\/8\")","description":"\u003cp\u003eLinear 2400-038 is the 4-5\/8 in U-bolt used to mount Linear (Osco) HSLG, GSLG-A and VS-GSLG slide gate operators.\u003c\/p\u003e\u003cp\u003eReplace rusted or stretched U-bolts when re-mounting or leveling the operator.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG\u003c\/li\u003e\n\u003cli\u003eGSLG-A\u003c\/li\u003e\n\u003cli\u003eVS-GSLG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMatch the 4-5\/8 in size on the old U-bolt.\u003c\/li\u003e\n\u003cli\u003eHSLG also uses a smaller 3 in U-bolt (2400-170) that is a different part.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951600067,"sku":"2400-038","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/linear-2400-038-4inch-u-bolt_91e91893-bb38-4616-ad53-339f9bb43f23.jpg?v=1689795882"},{"product_id":"2110-643-lock-assembly-with-keys","title":"Linear 2110-643-UPS Lock Assembly with Keys","description":"\u003cp\u003eThe Linear 2110-643-UPS is a snap lock assembly with two keys for Linear (formerly Osco) gate operator enclosures. It fits the HSLG, GSLG-A, VS-GSLG, SWG and VS-GSWG.\u003c\/p\u003e\u003cp\u003eReplace it when the lock is broken or the keys are lost.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG\u003c\/li\u003e\n\u003cli\u003eGSLG-A\u003c\/li\u003e\n\u003cli\u003eVS-GSLG\u003c\/li\u003e\n\u003cli\u003eSWG\u003c\/li\u003e\n\u003cli\u003eVS-GSWG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSnap lock assembly\u003c\/li\u003e\n\u003cli\u003e2 keys\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThis is the lock only. The enclosure door is not included.\u003c\/li\u003e\n\u003cli\u003eComplete door and lock assemblies are separate part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951600643,"sku":"2110-643-UPS","price":79.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2110-643_1.jpg?v=1687987780"},{"product_id":"2200-540-key","title":"Linear 2200-540 Key for Snap Lock","description":"\u003cp\u003eLinear 2200-540 is the replacement key for the snap lock on Linear (Osco) commercial gate operator covers.\u003c\/p\u003e\u003cp\u003eUse it to replace a lost key for the cover lock. One key fits the snap lock on HSLG, GSLG-A, VS-GSLG, SWG, VS-GSWG, BGU and SG series operators.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG\u003c\/li\u003e\n\u003cli\u003eGSLG-A\u003c\/li\u003e\n\u003cli\u003eVS-GSLG\u003c\/li\u003e\n\u003cli\u003eSWG\u003c\/li\u003e\n\u003cli\u003eVS-GSWG\u003c\/li\u003e\n\u003cli\u003eBGU\u003c\/li\u003e\n\u003cli\u003eBGU-D\u003c\/li\u003e\n\u003cli\u003eBGUS-D\u003c\/li\u003e\n\u003cli\u003eSG\u003c\/li\u003e\n\u003cli\u003eSG-D\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eKey only. The HSLG lock assembly with keys is 2110-643.\u003c\/li\u003e\n\u003cli\u003eSLR, SLC, SWR and SWC operators use a different cover lock (2200-790); their extra keys are 2200-824.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951601603,"sku":"2200-540","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-540.jpg?v=1761075115"},{"product_id":"2200-243-brake-spring-short-44","title":"Linear 2200-243 Brake Spring (short)","description":"\u003cp\u003e2200-243 Brake Spring (short) [#44] for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951620355,"sku":"2200-243","price":6.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/HSLG_202200-243.jpeg?v=1536876864"},{"product_id":"2100-548-plt-brake-rod-46","title":"Linear 2100-548-PLT Brake Rod","description":"\u003cp\u003e2100-548-PLT Brake Rod [#46] for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e \n\n\n\u003cp\u003ePlease follow the link below to see an exploded view of the HSLG:\u003c\/p\u003e\n\n\u003cp\u003eClick Here for HSLG EXPLODED VIEW\u003c\/p\u003e\n\n \u003cbr\u003e\n\u003cp\u003eItem is marked #46 in Drawings\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\u003cp\u003eDue to the wide range of replacement parts, many items are not stocked and may take 2-3 days before they are shipped.  If you need an item shipped next day air please contact us via phone at 262-989-9894 or email us at sales@proteccontrols.com.\u003c\/p\u003e\n\n\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951621699,"sku":"2100-548-PLT","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-548_8.png?v=1694625800"},{"product_id":"2300-716-stop-reset-button-cover","title":"Linear 2300-716 Stop\/Reset Button Cover","description":"\u003cp\u003e2300-716 Stop\/Reset Button Cover for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951622467,"sku":"2300-716","price":7.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2300-716_3.jpg?v=1688046384"},{"product_id":"2200-207-double-pulley-2-94","title":"Linear 2200-207 Double Pulley, 2\" ***Discontinued - Replaced by 2200-1012 Single Steel Pulley***","description":"\u003cp\u003eDiscontinued by Linear. The 2200-1012 single steel pulley is the updated version. Linear 2200-207 is the 2 in double pulley with a 5\/8 in bore for the Linear (Osco) HSLG slide gate operator.\u003c\/p\u003e\u003cp\u003eOrder 2200-1012 to replace a worn 2200-207. Replace the V-belt at the same time if it is cracked or glazed.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplaced by 2200-1012 single steel pulley.\u003c\/li\u003e\n\u003cli\u003eThe HSLG V-belt is 2200-234 (28 in).\u003c\/li\u003e\n\u003cli\u003eMatch the 5\/8 in bore on the old pulley.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951623619,"sku":"2200-207","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2200-207_2_ca5130e1-e4f1-4fed-852f-1ead82e7e7df.jpg?v=1688043139"},{"product_id":"2400-149-41-chain-30-links-29","title":"Linear  2400-149 #41 Chain, 30 Links","description":"\u003cp\u003e2400-149 #41 Chain, 30 Links [#29] for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cform method=\"Get\" action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\"\u003e\n\u003cp\u003e\u003cbutton type=\"submit\" class=\"btn\"\u003e Click for HSLG Manuals and Diagrams\u003c\/button\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eItem is marked #29 in Drawings\u003c\/p\u003e\n\u003cp\u003eDue to the wide range of replacement parts, many items are not stocked and may take 2-3 days before they are shipped. If you need an item shipped next day air please contact us via phone at 262-989-9894 or email us at sales@proteccontrols.com.\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951625475,"sku":"2400-149","price":12.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/2200-150_d260dc27-57ba-4544-8613-6dd8ff9ce5be.png?v=1567701646"},{"product_id":"2200-291-disconnect-spring-24","title":"Linear 2200-291 Disconnect Spring","description":"\u003cp\u003e2200-291 Disconnect Spring [#24] for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cform method=\"Get\" action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951625795,"sku":"2200-291","price":5.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/2200-291_63280b4b-10d5-4711-bbdd-a79e1adc8802.png?v=1701198420"},{"product_id":"2100-657-bt-rain-cover-19","title":"Linear 2100-657-BT Idler Rain Cover for HSLG, GSLG-A \u0026 VS-GSLG Slide Gates","description":"\u003cp\u003e2100-657-BT Rain Cover [#19] for Linear \/ OSCO HSLG Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cform action=\"https:\/\/www.proteccontrols.com\/pages\/hslg-resources\" method=\"Get\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003c\/form\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951626627,"sku":"2100-657-BT","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/linear-2100-657-bt_main_65183f11-bc51-46b0-9c97-abf2af9e970a.jpg?v=1692122872"},{"product_id":"2400-088-roll-pin","title":"Linear 2400-088 Roll Pin","description":"\u003cp\u003eLinear 2400-088 is a 3\/16 in x 1-3\/8 in roll pin for the Linear (Osco) HSLG slide gate operator. It is used in the clutch shaft assembly.\u003c\/p\u003e\n\u003cp\u003eReplace the pin when it is sheared, bent or loose. Drive the new pin in fully so it is flush on both sides.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHSLG slide gate operator\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSize: 3\/16 in x 1-3\/8 in.\u003c\/li\u003e\n\u003cli\u003eShown as ref 75 in the HSLG drawing.\u003c\/li\u003e\n\u003cli\u003eRelated clutch parts: 2100-669 pinned clutch hub, 2100-1008 clutch shaft.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951627267,"sku":"2400-088","price":2.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2400-088_8.jpg?v=1688046953"},{"product_id":"2100-2007-plt-gate-bracket-87","title":"Linear 2100-2007-PLT Gate Bracket","description":"\u003cp\u003eLinear 2100-2007-PLT is the gate bracket for Linear (Osco) slide gate operators. It mounts on the gate and holds the end of the drive chain.\u003c\/p\u003e\u003cp\u003eThe same bracket is used on HSLG, GSLG-A and VS-GSLG commercial operators and on SLR and SLC slide operators. Replace a bent or rusted bracket at the same time as a worn chain bolt.\u003c\/p\u003e\u003ch4\u003eFits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSLG\u003c\/li\u003e\n\u003cli\u003eGSLG-A\u003c\/li\u003e\n\u003cli\u003eVS-GSLG\u003c\/li\u003e\n\u003cli\u003eSLR\u003c\/li\u003e\n\u003cli\u003eSLC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe chain tension bolt is 2100-258 and the #40 master link is 2200-006.\u003c\/li\u003e\n\u003cli\u003eMount the bracket in line with the drive chain so the chain runs level.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951627395,"sku":"2100-2007-PLT","price":39.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2100-2007_linear-bracket_front.jpg?v=1692128071"},{"product_id":"2400-170-u-bolt-3-88","title":"Linear  2400-170 U-Bolt, 3\"","description":"\u003cp\u003e2400-170 U-Bolt, 3\" for Linear \/ OSCO Slide Gate Operators\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUsed to mount the chain brackets to the gate.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21951627523,"sku":"2400-170","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/2400-170_10_1800x1800_9f14044d-8517-4307-9e77-4ad50f3431f3.jpg?v=1758561521"}],"url":"https:\/\/www.proteccontrols.com\/collections\/linear.oembed?page=19","provider":"Protec Controls","version":"1.0","type":"link"}