{"title":"Swing Gate Operators","description":"\u003cp\u003eSwing gate operators for single and double hinged gates, from light driveway gates to heavy commercial and industrial leaves. Protec Controls carries FAAC hydraulic and underground operators, Linear SWG and PRO-SW models, All-O-Matic, Nice Titan actuators, HySecurity HydraSwing and SwingRiser, DoorKing, Viking and LiftMaster. Choose operator-only units, primary and secondary arms, or complete single and dual gate kits.\u003c\/p\u003e","products":[{"product_id":"dks-doorking-6100-swing-gate-operator","title":"DKS - Doorking 6100 Primary Swing Gate Operator","description":"\u003cp\u003eThe DoorKing 6100-380 is a 1\/2 hp, 115 VAC swing gate operator for residential and light commercial gates up to 14 ft and 500 lb. Continuous-duty motor, swings 90° in about 10 seconds.\u003c\/p\u003e\u003cp\u003eThis is the primary unit with the control board. Self-adjusting magnetic limits, overlap for dual gates, built-in primary and secondary entrapment prevention, tamper detect circuit and fail-safe release. Ports for plug-in loop detectors, Gate Tracker reporting output, programming switches, reset switch and power on\/off switch. UL 325 Class I and II, ETL listed.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e115 VAC, 5.4 A.\u003c\/li\u003e\n\u003cli\u003eChoose post mount or pad mount hardware on this page; one is required.\u003c\/li\u003e\n\u003cli\u003eFor a dual (bi-parting) gate, add the 6100-381 secondary unit.\u003c\/li\u003e\n\u003cli\u003eOptional DC-powered convenience open adds about 5 in to the operator depth.\u003c\/li\u003e\n\u003cli\u003eNeeds monitored external entrapment protection (photo eyes or edges) in each entrapment zone for UL 325 compliance; these are not included.\u003c\/li\u003e\n\u003cli\u003eHeater kit available for cold climates.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doorking","offers":[{"title":"Post Mount","offer_id":21952503299,"sku":"6100-380","price":2293.0,"currency_code":"USD","in_stock":true},{"title":"Pad Mount","offer_id":28510334787,"sku":"6100-380","price":2246.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/dks-6050-6100-Gate-Operator.webp?v=1729015676"},{"product_id":"dks-doorking-6300-1-2hp-swing-gate-operator","title":"DKS - Doorking 6300 1\/2HP Primary Swing Gate Operator","description":"\u003cp\u003eThe DoorKing 6300-380 is a 1\/2 hp, 115 VAC swing gate operator for commercial and industrial gates up to 18 ft and 700 lb. Continuous-duty motor, 90° in about 15 to 18 seconds.\u003c\/p\u003e\u003cp\u003ePrimary unit with the control board. Self-adjusting magnetic limits, overlap for dual gates, built-in primary and secondary entrapment prevention, tamper detect circuit and fail-safe release. Ports for plug-in loop detectors, two 115 VAC convenience outlets, 24 VDC maglock power, Gate Tracker reporting output and programming switches. UL 325 Class I-IV, ETL listed.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e115 VAC operation. 230 and 460 VAC units use a step-down transformer. 5.4 A at 115 VAC.\u003c\/li\u003e\n\u003cli\u003eChoose post mount or pad mount hardware on this page; one is required.\u003c\/li\u003e\n\u003cli\u003eFor a dual (bi-parting) gate, add the 6300-381 secondary; the secondary includes a 50 ft interconnect cable.\u003c\/li\u003e\n\u003cli\u003eOptional DC-powered convenience open available.\u003c\/li\u003e\n\u003cli\u003eNeeds monitored external entrapment protection (photo eyes or edges) in each entrapment zone for UL 325 compliance; these are not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doorking","offers":[{"title":"Post Mount","offer_id":21952513539,"sku":"6300-080","price":2527.2,"currency_code":"USD","in_stock":true},{"title":"Pad Mount","offer_id":28510617219,"sku":"6300-080","price":2527.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/dks_6300.jpg?v=1470067926"},{"product_id":"dks-doorking-6300-1hp-swing-gate-operator","title":"DKS - Doorking 6300 1HP Primary Swing Gate Operator","description":"\u003cp\u003eThe DoorKing 6300-384 is a 1 hp, 115 VAC swing gate operator for commercial and industrial gates up to 22 ft and 800 lb. Continuous-duty motor, 90° in about 15 to 18 seconds.\u003c\/p\u003e\u003cp\u003ePrimary unit with the control board. Self-adjusting magnetic limits, overlap for dual gates, built-in primary and secondary entrapment prevention, tamper detect circuit and fail-safe release. Ports for plug-in loop detectors, two 115 VAC convenience outlets, 24 VDC maglock power, Gate Tracker reporting output and programming switches. UL 325 Class I-IV, ETL listed.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e115 VAC operation. 230 and 460 VAC units use a step-down transformer. 9.7 A at 115 VAC.\u003c\/li\u003e\n\u003cli\u003eChoose post mount or pad mount hardware on this page; one is required.\u003c\/li\u003e\n\u003cli\u003eFor a dual (bi-parting) gate, add the 6300-385 secondary; the secondary includes a 50 ft interconnect cable.\u003c\/li\u003e\n\u003cli\u003eOptional DC-powered convenience open available.\u003c\/li\u003e\n\u003cli\u003eNeeds monitored external entrapment protection (photo eyes or edges) in each entrapment zone for UL 325 compliance; these are not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doorking","offers":[{"title":"Post Mount","offer_id":21952516995,"sku":"6300-084","price":3159.0,"currency_code":"USD","in_stock":true},{"title":"Pad Mount","offer_id":28510739843,"sku":"6300-084","price":3159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/dks_6300_18d16188-a31d-431c-8f81-225a984f05e9.jpg?v=1470068001"},{"product_id":"linear-osco-swd-swing-gate-operator-with-dc-battery-back-up","title":"Linear OSCO SWD-211 1\/2HP Swing Gate Operator w\/ DC Battery Back-up","description":"\u003cp\u003eThe Linear OSCO SWD-211 is a 1\/2 HP DC crank-arm swing gate operator with built-in battery backup, for commercial and residential gates up to 18 ft and 700 lb. Runs from 115 VAC single-phase power through a transformer; continuous duty, 11 to 14 seconds to open.\u003c\/p\u003e\n\u003cp\u003eAPeX controller with built-in MegaCode receiver, digital entrapment sensing, LED diagnostics, auto-close timer (0-9 minutes) and dual-gate networking over 3-wire shielded cable. 1\/2 HP DC motor to a right-angle gear reducer and 1 in output shaft on a zinc-plated steel chassis under a UV-stabilized polyethylene cover. Regulated 24 VDC accessory power. Selectable fail-safe or fail-secure on power loss. Dual 24 VDC batteries charge from 115 VAC or optional 24 V solar panels.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\u003cli\u003eTwo backup batteries (built-in 24 VDC battery backup)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply to charge the batteries, or optional 24 V solar panels.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad mount standard. Post mount with the optional \u003ca href=\"\/products\/linear-osco-2120-483\"\u003e2120-483 post mount kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSolar panels are not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21952534275,"sku":"SWD-211","price":2335.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/SW_9b3bdb54-427c-40f2-b309-7ce18356e5eb.jpeg?v=1701383176"},{"product_id":"linear-osco-swr-swing-gate-operator","title":"Linear OSCO SWR-211 1\/2HP Residential Swing Gate Operator","description":"\u003cp\u003eThe Linear OSCO SWR-211 is a 1\/2 HP, 115 VAC single-phase crank-arm swing gate operator for residential gates up to 15 ft and 500 lb. Rated for up to 150 cycles per day, 11 to 14 seconds to open.\u003c\/p\u003e\n\u003cp\u003eAPeX controller with built-in MegaCode receiver, digital entrapment sensing, LED diagnostics, auto-close timer (0-9 minutes) and dual-gate networking over 3-wire shielded cable. 1\/2 HP PSC motor to a right-angle gear reducer and 1 in output shaft on a zinc-plated steel chassis under a UV-stabilized polyethylene cover. Regulated 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad mount standard. Post mount with the optional \u003ca href=\"\/products\/linear-osco-2120-483\"\u003e2120-483 post mount kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eResidential rating. For commercial traffic, see the SWC or SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21952536067,"sku":"SWR-211","price":1720.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/swc_9ebf527b-ad8f-4a24-ba8f-c3feb3713d9f.jpg?v=1701281828"},{"product_id":"linear-osco-swg-1-2hp-swing-gate-operator","title":"LINEAR OSCO SWG-211 1\/2HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-211 is a 1\/2 HP, 115 VAC single-phase swing gate operator for commercial and industrial gates up to 18 ft and 700 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1\/2 HP PSC motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21952536899,"sku":"SWG-211","price":3051.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_ef547d51-96da-4546-8063-85c2128ddf38.jpg?v=1701452123"},{"product_id":"linear-osco-vs-gswg-1-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-211 1\/2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-211 is a 1\/2 HP, 115 VAC single-phase variable speed swing gate operator for industrial gates up to 28 ft and 1,000 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":21952546307,"sku":"VS-GSWG-211","price":4195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series.png?v=1536876678"},{"product_id":"viking-f-1-nx-2nd-gen-swing-gate-operator","title":"Viking F-1 Swing Gate Operator","description":"\u003cp\u003eThe Viking F-1 is a 1\/2 HP, 24 VDC swing gate operator for residential and commercial gates up to 12 ft and 1,500 lb, or 16 ft and 1,000 lb. 100% duty cycle, 13 to 16 seconds per 90°.\u003c\/p\u003e\u003cp\u003eV-Flex control board with LCD readout of volts, amps, gate status and diagnostics. Soft start and soft stop. Two 7 Ah 12 VDC batteries included for up to 400 continuous cycles during a power outage. Built-in heater, quick release handle, 1\/4 in steel chassis with multi-layer corrosion protection. Lightning protection up to 20,000 V \/ 10,000 A. Removable power supply box for low voltage wiring. Works with Viking wireless products.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120 VAC or 240 VAC single-phase input.\u003c\/li\u003e\n\u003cli\u003eUL 325 Class I, II, III and IV.\u003c\/li\u003e\n\u003cli\u003eInstall monitored photo eyes or edges for UL 325 entrapment protection. The V-Flex board has two monitoring inputs, up to 4 devices each.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":21952559043,"sku":"VA-F1NX","price":2375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/f1nx.webp?v=1706221180"},{"product_id":"viking-r-6-nx-2nd-gen-swing-gate-operator","title":"Viking R-6 Swing Gate Operator","description":"\u003cp\u003eThe Viking R-6 is a 24 VDC swing gate operator for residential gates up to 14 ft and 700 lb. DC motor rated by Viking as equivalent to a 1\/3 HP AC motor, 100% duty cycle, 13 to 16 seconds per 90°.\u003c\/p\u003e\u003cp\u003eV-Flex control board with LCD readout of volts, amps, gate status and diagnostics. Soft start and soft stop. Two 12 VDC batteries included for up to 400 continuous cycles during a power outage. Built-in heater for use down to -20°F, quick release handle, G90 galvanized and powder-coated finish. Lightning protection up to 20,000 V \/ 10,000 A. Removable power supply with fuse access and LED indicators. Works with Viking wireless products.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120 VAC or 240 VAC single-phase input.\u003c\/li\u003e\n\u003cli\u003eUL 325 Class I only: residential use.\u003c\/li\u003e\n\u003cli\u003eInstall monitored photo eyes or edges for UL 325 entrapment protection. The V-Flex board has two monitoring inputs, up to 4 devices each.\u003c\/li\u003e\n\u003cli\u003eThis is the standard power model. Viking sells the R-6 Solar as a separate model.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":21952561731,"sku":"R-6NX","price":1925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/VikingR6ResidentialSwingGateOperatorOnlyVIK-VA-R6NX_2_1600x_84ef1bd7-75a3-4088-85e4-f13c25cf5b01.jpg?v=1692295755"},{"product_id":"viking-g-5-2nd-gen-single-swing-gate-operator-with-controller","title":"Viking VA-G5SLK - G-5 Single Swing Gate Kit","description":"\u003cp\u003eThe Viking G-5 Single Swing Gate Kit (VA-G5SLK) is a 1\/2 HP, 24 VDC linear actuator kit for one residential or commercial swing gate up to 10 ft and 2,000 lb, or 18 ft and 800 lb. 100% duty cycle, 15 to 18 seconds per 90°.\u003c\/p\u003e\u003cp\u003eLinear actuator with V-Flex control board, LCD diagnostics and speed control dial. Electronic manual release switch, break-away joint, adjustable positive stops and pre-wired motor. Powder-coated aluminum alloy chassis, thermostat-controlled heater, lightning protection up to 20,000 V \/ 10,000 A. Battery backup for up to 400 continuous cycles. Works with Viking wireless products.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e(1) VA-G5NX G-5 swing gate operator\u003c\/li\u003e\n\u003cli\u003e(1) VA-ECUMSNX2 control box\u003c\/li\u003e\n\u003cli\u003e(1) FA-XR2C 433 MHz receiver\u003c\/li\u003e\n\u003cli\u003e(2) FA-XT4RC 433 MHz transmitters\u003c\/li\u003e\n\u003cli\u003e(1) FA-XP30-10K photo eye, 10K\u003c\/li\u003e\n\u003cli\u003e(2) FA-XP30AC photo eye adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120 VAC or 240 VAC single-phase input. Can also run on 24 VAC\/VDC or solar.\u003c\/li\u003e\n\u003cli\u003eOpens up to 135°.\u003c\/li\u003e\n\u003cli\u003eUL 325 Class I, II, III and IV.\u003c\/li\u003e\n\u003cli\u003eInstall monitored photo eyes or edges for UL 325 entrapment protection. The V-Flex board has two monitoring inputs, up to 4 devices each.\u003c\/li\u003e\n\u003cli\u003eLarge box option holds two 35 Ah batteries for longer backup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":21952564355,"sku":"VA-G5SLK","price":1975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/VA-G5SLK.webp?v=1787852716"},{"product_id":"viking-g-5-2nd-gen-dual-swing-gate-operators-with-control-box","title":"Viking VA-G5DLK - G-5 Dual Swing Gate Kit","description":"\u003cp\u003eThe Viking G-5 Dual Swing Gate Kit (VA-G5DLK) is a pair of 1\/2 HP, 24 VDC linear actuators for dual residential or commercial swing gates, each leaf up to 10 ft and 2,000 lb, or 18 ft and 800 lb. 100% duty cycle, 15 to 18 seconds per 90°.\u003c\/p\u003e\u003cp\u003eLinear actuator with V-Flex control board, LCD diagnostics and speed control dial. Electronic manual release switch, break-away joint, adjustable positive stops and pre-wired motor. Powder-coated aluminum alloy chassis, thermostat-controlled heater, lightning protection up to 20,000 V \/ 10,000 A. Battery backup for up to 400 continuous cycles. Works with Viking wireless products.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e(2) VA-G5NX G-5 swing gate operators\u003c\/li\u003e\n\u003cli\u003e(1) VA-ECUMSNX2 dual control box\u003c\/li\u003e\n\u003cli\u003e(1) FA-XR2C 433 MHz receiver\u003c\/li\u003e\n\u003cli\u003e(2) FA-XT4RC 433 MHz transmitters\u003c\/li\u003e\n\u003cli\u003e(1) FA-XP30-10K photo eye, 10K\u003c\/li\u003e\n\u003cli\u003e(2) FA-XP30AC photo eye adapters\u003c\/li\u003e\n\u003cli\u003e(1) DJBK junction box\u003c\/li\u003e\n\u003cli\u003e40 ft VA-CB16 6-conductor 16 AWG shielded cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120 VAC or 240 VAC single-phase input. Can also run on 24 VAC\/VDC or solar.\u003c\/li\u003e\n\u003cli\u003eOpens up to 135°.\u003c\/li\u003e\n\u003cli\u003eUL 325 Class I, II, III and IV.\u003c\/li\u003e\n\u003cli\u003eInstall monitored photo eyes or edges for UL 325 entrapment protection. The V-Flex board has two monitoring inputs, up to 4 devices each.\u003c\/li\u003e\n\u003cli\u003eLarge box option holds two 35 Ah batteries for longer backup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":21952565827,"sku":"VA-G5DLK","price":2995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/VA-G5DLK.jpg?v=1787852039"},{"product_id":"viking-x-9-single-swing-gate-operator-with-control-box","title":"Viking X-9 Single Swing Gate Operator with Control Box  ***Discontinued***","description":"\u003cp\u003eDiscontinued by Viking. The X-390 is the updated version. The X-9 is a 1\/2 HP, 24 VDC swing gate operator with control box for one gate up to 14 ft and 600 lb, rated for 100% duty cycle and UL 325 Class I-IV.\u003c\/p\u003e\u003cp\u003eBattery backup included, solar capable, onboard lightning protection, positive stop system and mechanical limits. 10 to 13 seconds per 90°.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFor a new install or replacement, use the Viking X-390 Single Leaf Kit: 24 VDC, gates up to 14 ft and 600 lb, column mount.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":21952566787,"sku":"X-9NX","price":1801.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/viking_x-9.png?v=1474659043"},{"product_id":"viking-x-9-dual-swing-gate-operators-with-control-box","title":"Viking X-9 Dual Swing Gate Operators with Control Box  ***Discontinued***","description":"\u003cp\u003eDiscontinued by Viking. The X-390 is the updated version. The X-9 Dual is a pair of 1\/2 HP, 24 VDC swing gate operators with control box for dual gates, each leaf up to 14 ft and 600 lb, rated for 100% duty cycle and UL 325 Class I-IV.\u003c\/p\u003e\u003cp\u003eBattery backup included, solar capable, onboard lightning protection, positive stop system and mechanical limits. 10 to 13 seconds per 90°.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFor a new install or replacement, use the Viking X-390 Dual Leaf Kit (VA-X390DLK): 24 VDC, each leaf up to 14 ft and 600 lb, column mount.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":21952568579,"sku":"X-9nx Dual","price":3093.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/viking_x-9_1bd8717d-10f9-4ace-804f-778e2d57ab41.png?v=1687442561"},{"product_id":"viking-t-21-nx-2nd-gen-swing-gate-operator","title":"Viking T-21 Swing Gate Operator","description":"\u003cp\u003eThe Viking T-21 is a 1 HP, 24 VDC swing gate operator for residential and commercial gates up to 12 ft and 2,000 lb, or 20 ft and 1,200 lb. 100% duty cycle, 13 to 16 seconds per 90°.\u003c\/p\u003e\u003cp\u003eV-Flex control board with LCD readout of volts, amps, gate status and diagnostics. Soft start and soft stop. Two 7 Ah 12 VDC batteries included for up to 400 continuous cycles during a power outage. Thermostat-controlled heater, quick release handle, 1\/4 in steel chassis with multi-layer corrosion protection. Lightning protection up to 20,000 V \/ 10,000 A. Removable power supply box with LED indicators. Works with Viking wireless products.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120 VAC or 240 VAC single-phase input.\u003c\/li\u003e\n\u003cli\u003eUL 325 Class I, II, III and IV.\u003c\/li\u003e\n\u003cli\u003eInstall monitored photo eyes or edges for UL 325 entrapment protection. The V-Flex board has two monitoring inputs, up to 4 devices each.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":21952569795,"sku":"VA-T21NX","price":3220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/VikingT21SwingGateOperatorResidentialandCommercialVIK-VA-T21NX_1600x_f99371ee-8124-45e4-8c65-13bccb8517a1.jpg?v=1692292926"},{"product_id":"powermaster-msw-2000-swing-gate-operator","title":"PowerMaster MSW 1\/2HP Swing Gate Operator","description":"\u003cp\u003eMSW Swing Gate Operator\u003c\/p\u003e\n\u003cp\u003eTECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003ePower requirements: 115 Volts, 1 phase.\u003c\/p\u003e\n\u003cp\u003eClass 2 low voltage control circuit.\u003c\/p\u003e\n\u003cp\u003eAvailable horse power: 1\/2 HP.\u003c\/p\u003e\n\u003cp\u003eMaximum gate weight: 800 LBS.\u003c\/p\u003e\n\u003cp\u003eMaximum cycles per hour: 24 CPH.\u003c\/p\u003e\n\u003cp\u003eMaximum gate width: 16 feet.\u003c\/p\u003e\n\u003cp\u003eGate speed: 12 seconds from open to close.\u003c\/p\u003e\n\u003cp\u003eUL 325 Listed for use in Class I through IV application.\u003c\/p\u003e\n\u003cp\u003eShipping weight: approx. 103 LBS.\u003c\/p\u003e\n\u003cp\u003ePlease call or email us for freight pricing, we can usually beat the price quoted online by using different regional freight carriers or shipping direct from the manufacturer. This item cannot be shipped via UPS or the Postal Service, only via freight. If you are getting multiple items we can usually get you an additional discount as well.\u003c\/p\u003e\n\u003cp\u003eWe have 10 years experience working on these products in the field. Please contact us if we can be of any assistance!\u003c\/p\u003e\n\u003cp\u003ePRODUCT INFO PAGES\u003c\/p\u003e\n\u003cp\u003eClick Here for Spec Sheet\u003c\/p\u003e\n\u003cp\u003eClick Here for Manual\u003c\/p\u003e\n\u003cp\u003eOptions Available with this model:\u003c\/p\u003e","brand":"PowerMaster","offers":[{"title":"Default Title","offer_id":21952675203,"sku":"MSW 2000","price":2525.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/MSW_202000.jpeg?v=1465926604"},{"product_id":"hysecurity-swingsmart-dc-20-swing-gate-operator","title":"HySecurity SwingSmart DC 20 Swing Gate Operator","description":"\u003cp\u003eThe HySecurity SwingSmart DC 20 is a 1\/2 hp, 24 VDC electromechanical swing gate operator for residential and commercial gates up to 20 ft. It is rated for 1,300 lb on a 12 ft leaf, 800 lb on a 16 ft leaf and 600 lb on a 20 ft leaf, with a continuous duty rating.\u003c\/p\u003e\u003cp\u003eOpen and close time adjusts from 10 to 15 seconds. The Smart DC controller has 70+ settings, a 32-character LCD display and an event log, and it synchronizes dual gates. Standard battery backup gives up to 300 cycles after power loss, or up to 1,200 cycles with extended batteries. Solar ready for 24 VDC panels. Patented Taper Clamp slips to protect the drive from wind load and gate strikes. Cast steel housing and telescoping arm under a key-locked cover.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSwingSmart DC 20 operator with telescoping arm\u003c\/li\u003e\n\u003cli\u003e(2) 8Ah backup batteries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e115 VAC or 208-230 VAC, 50\/60 Hz. Solar use requires 24 VDC panels (40 W minimum per spec sheet).\u003c\/li\u003e\n\u003cli\u003eCheck the weight-to-length chart: capacity drops from 1,300 lb at 12 ft to 600 lb at 20 ft.\u003c\/li\u003e\n\u003cli\u003eUL 325 Class I, II, III and IV. Monitored entrapment protection (photo eyes or edges) is required.\u003c\/li\u003e\n\u003cli\u003ePad mount.\u003c\/li\u003e\n\u003cli\u003eFor dual gates, order a second operator.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HySecurity","offers":[{"title":"Default Title","offer_id":21952742531,"sku":"S-SWD-1-B0","price":2995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/SwingSmart.jpeg?v=1536850093"},{"product_id":"apollo-1650etl-dual-actuator-swing-gate-operator","title":"NICE Apollo 1650ETL Dual Linear Actuator Swing Gate Operator","description":"\u003cp\u003eDiscontinued by Nice. The Nice Apollo 1551 Dual is the updated version. The 1650ETL is a 12 VDC linear actuator system for dual swing gates up to 16 ft and 600 lb per leaf, with a 14 to 16 second open time.\u003c\/p\u003e\n\u003cp\u003e1050 control board with LCD display, 7-day timer, programmable inputs and outputs, dual gate management and obstacle detection. Plug-in receiver handles up to 1,000 rolling-code transmitters. Built-in solar regulator, surge protection. Actuator measures 42 in retracted and 66 in extended.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCBOX1050 control box with 1050US control board\u003c\/li\u003e\n\u003cli\u003e816-1 primary actuator with 12 ft harness and mounting hardware\u003c\/li\u003e\n\u003cli\u003e816-2 secondary actuator with 42 ft harness and mounting hardware\u003c\/li\u003e\n\u003cli\u003eOXIBD\/A receiver\u003c\/li\u003e\n\u003cli\u003eEPMOB\/A thru-beam photo eyes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRuns on 12 VDC battery power; battery and AC charger or solar panel are not in the included list.\u003c\/li\u003e\n\u003cli\u003eFor a single gate, see the Nice Apollo 1551 Single.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NICE Apollo","offers":[{"title":"Default Title","offer_id":21952765059,"sku":"1650ETL","price":2550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/1650etl-1k_nice-apollo-1650etl-1k-smart-etl-dual-swing-gate-opener_1.webp?v=1761856978"},{"product_id":"linear-osco-vs-gswg-221-1-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-221 1\/2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-221 is a 1\/2 HP, 208\/230 VAC single-phase variable speed swing gate operator for industrial gates up to 28 ft and 1,000 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673230723,"sku":"VS-GSWG-221","price":4195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_c97fdc91-7531-4da3-9ec2-83294482caf7.png?v=1536876651"},{"product_id":"linear-osco-vs-gswg-281-1-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-281 1\/2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-281 is a 1\/2 HP, 208 VAC single-phase variable speed swing gate operator for industrial gates up to 28 ft and 1,000 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673318595,"sku":"VS-GSWG-281","price":4195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_b921905e-6e8e-4bfb-a46e-26d42af9bca6.png?v=1536876650"},{"product_id":"linear-osco-vs-gswg-223-1-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-223 1\/2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-223 is a 1\/2 HP, 208\/230 VAC three-phase variable speed swing gate operator for industrial gates up to 28 ft and 1,000 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673380739,"sku":"VS-GSWG-223","price":4195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_1904d635-7946-4a26-b1cb-98d52d22e7ff.png?v=1536876650"},{"product_id":"linear-osco-vs-gswg-243-1-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-243 1\/2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-243 is a 1\/2 HP, 460 VAC three-phase variable speed swing gate operator for industrial gates up to 28 ft and 1,000 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 460 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673442371,"sku":"VS-GSWG-243","price":4195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_6fda5436-45a8-4efa-9a0e-a5e8a73089ff.png?v=1536876650"},{"product_id":"linear-osco-vs-gswg-111-1hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-111 1HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-111 is a 1 HP, 115 VAC single-phase variable speed swing gate operator for industrial gates up to 32 ft and 1,200 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673491139,"sku":"VS-GSWG-111","price":4395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_cbeee05e-8509-4c03-b9dc-d9ada4ff86b2.png?v=1536876649"},{"product_id":"linear-osco-vs-gswg-121-1hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-121 1HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-121 is a 1 HP, 208\/230 VAC single-phase variable speed swing gate operator for industrial gates up to 32 ft and 1,200 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673568067,"sku":"VS-GSWG-121","price":4395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_5f1a0de2-9f05-4c0f-ac87-3e5757d7a52f.png?v=1536876649"},{"product_id":"linear-osco-vs-gswg-183-1hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-183 1HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-183 is a 1 HP, 208 VAC three-phase variable speed swing gate operator for industrial gates up to 32 ft and 1,200 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673622979,"sku":"VS-GSWG-183","price":4395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_65e593f9-4359-4f9d-87d4-19804633c3f2.png?v=1536876649"},{"product_id":"linear-osco-vs-gswg-123-1hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-123 1HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-123 is a 1 HP, 208\/230 VAC three-phase variable speed swing gate operator for industrial gates up to 32 ft and 1,200 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673702915,"sku":"VS-GSWG-123","price":4395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_9cc671c5-5223-4462-b87f-f3a15e6ab596.png?v=1536876648"},{"product_id":"linear-osco-vs-gswg-143-1hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-143 1HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-143 is a 1 HP, 460 VAC three-phase variable speed swing gate operator for industrial gates up to 32 ft and 1,200 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 460 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673760131,"sku":"VS-GSWG-143","price":4395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_f79857bc-f808-48b6-93ae-776390d139d0.png?v=1536876648"},{"product_id":"linear-osco-vs-gswg-721-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-721 2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-721 is a 2 HP, 208\/230 VAC single-phase variable speed swing gate operator for industrial gates up to 36 ft and 1,500 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673849027,"sku":"VS-GSWG-721","price":4900.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_97324dc5-cbb1-4869-933c-97096bc14caf.png?v=1536876648"},{"product_id":"linear-osco-vs-gswg-783-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-783 2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-783 is a 2 HP, 208 VAC three-phase variable speed swing gate operator for industrial gates up to 36 ft and 1,500 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26673890755,"sku":"VS-GSWG-783","price":4900.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_e373c99d-83ea-4232-a751-4bd62e98b283.png?v=1536876647"},{"product_id":"linear-osco-vs-gswg-723-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-723 2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-723 is a 2 HP, 208\/230 VAC three-phase variable speed swing gate operator for industrial gates up to 36 ft and 1,500 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26674177091,"sku":"VS-GSWG-723","price":4900.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_1bcb37c5-0a6b-4bda-b2e2-95a88430b6f1.png?v=1536876647"},{"product_id":"linear-osco-vs-gswg-743-2hp-variable-speed-swing-gate-operator","title":"LINEAR OSCO VS-GSWG-743 2HP VARIABLE SPEED SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO VS-GSWG-743 is a 2 HP, 460 VAC three-phase variable speed swing gate operator for industrial gates up to 36 ft and 1,500 lb. Continuous duty, 18 to 22 seconds to open.\u003c\/p\u003e\n\u003cp\u003eA programmable variable frequency drive gives soft start and soft stop on a continuous-duty, 56-frame industrial motor. Direct C-face motor to 60:1 right-angle gear reducer, adjustable torque limiter, linear drive arm and pillow-block bearings. Integral APeX controller with three-button station, built-in master\/second for dual gates, rotary limit switches and 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 460 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 1 and 2 HP models in other voltages and three-phase are available in the VS-GSWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26674264515,"sku":"VS-GSWG-743","price":4900.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/vs-gswg_series_35e61dae-859d-432c-befc-99534254a6e4.png?v=1536876647"},{"product_id":"linear-osco-swg-221-1-2hp-swing-gate-operator","title":"LINEAR OSCO SWG-221 1\/2HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-221 is a 1\/2 HP, 208\/230 VAC single-phase swing gate operator for commercial and industrial gates up to 18 ft and 700 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1\/2 HP PSC motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26674771779,"sku":"SWG-221","price":3051.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_512ef487-e6d2-4908-80b9-a596d7886d6d.jpg?v=1701452152"},{"product_id":"linear-osco-swg-283-1-2hp-swing-gate-operator","title":"LINEAR OSCO SWG-283 1\/2HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-283 is a 1\/2 HP, 208 VAC three-phase swing gate operator for commercial and industrial gates up to 18 ft and 700 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1\/2 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26674858307,"sku":"SWG-283","price":3132.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_4606a1d5-c4da-4db4-90b0-1e1ce386edbf.jpg?v=1701452251"},{"product_id":"linear-osco-swg-223-1-2hp-swing-gate-operator","title":"LINEAR OSCO SWG-223 1\/2HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-223 is a 1\/2 HP, 208\/230 VAC three-phase swing gate operator for commercial and industrial gates up to 18 ft and 700 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1\/2 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675002243,"sku":"SWG-223","price":3132.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_249878d9-3a6a-4d02-8155-7ed19da10b46.jpg?v=1701452181"},{"product_id":"linear-osco-swg-243-1-2hp-swing-gate-operator","title":"LINEAR OSCO SWG-243 1\/2HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-243 is a 1\/2 HP, 460 VAC three-phase swing gate operator for commercial and industrial gates up to 18 ft and 700 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1\/2 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 460 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675142275,"sku":"SWG-243","price":3132.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_2620c29d-9104-4489-9140-adce2eda07d3.jpg?v=1701452203"},{"product_id":"linear-osco-swg-411-3-4hp-swing-gate-operator","title":"LINEAR OSCO SWG-411 3\/4HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-411 is a 3\/4 HP, 115 VAC single-phase swing gate operator for commercial and industrial gates up to 22 ft and 900 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 3\/4 HP PSC motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675211139,"sku":"SWG-411","price":3160.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_9c0aeebb-8b40-4192-b08c-6a318cbbb098.jpg?v=1701452276"},{"product_id":"linear-osco-swg-421-3-4hp-swing-gate-operator","title":"LINEAR OSCO SWG-421 3\/4HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-421 is a 3\/4 HP, 208\/230 VAC single-phase swing gate operator for commercial and industrial gates up to 22 ft and 900 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 3\/4 HP PSC motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675302019,"sku":"SWG-421","price":3160.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_3e3b5972-7e1c-472a-93b0-0c7a2565d0a9.jpg?v=1701452299"},{"product_id":"linear-osco-swg-483-3-4hp-swing-gate-operator","title":"LINEAR OSCO SWG-483 3\/4HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-483 is a 3\/4 HP, 208 VAC three-phase swing gate operator for commercial and industrial gates up to 22 ft and 900 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 3\/4 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675369539,"sku":"SWG-483","price":3210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_1f7e75b2-214e-4414-99ee-c2e1bb300573.jpg?v=1701452371"},{"product_id":"linear-osco-swg-423-3-4hp-swing-gate-operator","title":"LINEAR OSCO SWG-423 3\/4HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-423 is a 3\/4 HP, 208\/230 VAC three-phase swing gate operator for commercial and industrial gates up to 22 ft and 900 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 3\/4 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675428291,"sku":"SWG-423","price":3210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_213c5f55-368d-4ad2-ac6f-74d5ab90a236.jpg?v=1701452322"},{"product_id":"linear-osco-swg-443-3-4hp-swing-gate-operator","title":"LINEAR OSCO SWG-443 3\/4HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-443 is a 3\/4 HP, 460 VAC three-phase swing gate operator for commercial and industrial gates up to 22 ft and 900 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 3\/4 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 460 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675488899,"sku":"SWG-443","price":3210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_57044e4f-e0b4-4c20-8d9f-b53d3bf7a2c1.jpg?v=1701452344"},{"product_id":"linear-osco-swg-111-1hp-swing-gate-operator","title":"LINEAR OSCO SWG-111 1HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-111 is a 1 HP, 115 VAC single-phase swing gate operator for commercial and industrial gates up to 26 ft and 1,000 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1 HP PSC motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675536259,"sku":"SWG-111","price":3125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/Untitled-1_19_632ddfe5-7c00-4e32-9d9b-a493686145c6.jpg?v=1701383615"},{"product_id":"linear-osco-swg-183-1hp-swing-gate-operator","title":"LINEAR OSCO SWG-183 1HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-183 is a 1 HP, 208 VAC three-phase swing gate operator for commercial and industrial gates up to 26 ft and 1,000 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675639043,"sku":"SWG-183","price":3235.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_a4a8431c-e7ba-4408-954c-09bc41517733.jpg?v=1701452098"},{"product_id":"linear-osco-swg-121-1hp-swing-gate-operator","title":"LINEAR OSCO SWG-121 1HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-121 is a 1 HP, 208\/230 VAC single-phase swing gate operator for commercial and industrial gates up to 26 ft and 1,000 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1 HP PSC motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675708611,"sku":"SWG-121","price":3125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/Untitled-1_19_632ddfe5-7c00-4e32-9d9b-a493686145c6_1.jpg?v=1701451435"},{"product_id":"linear-osco-swg-123-1hp-swing-gate-operator","title":"LINEAR OSCO SWG-123 1HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-123 is a 1 HP, 208\/230 VAC three-phase swing gate operator for commercial and industrial gates up to 26 ft and 1,000 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675759939,"sku":"SWG-123","price":3235.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2.jpg?v=1701451923"},{"product_id":"linear-osco-swg-143-1hp-swing-gate-operator","title":"LINEAR OSCO SWG-143 1HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWG-143 is a 1 HP, 460 VAC three-phase swing gate operator for commercial and industrial gates up to 26 ft and 1,000 lb. Continuous duty, about 15 seconds to open 90°.\u003c\/p\u003e\n\u003cp\u003eIntegral APeX controller with three-button control station and built-in master\/second for dual gates. 1 HP three-phase motor with thermal protection driving a 60:1 right-angle C-face gear reducer, #40 roller chain and an adjustable torque limiter. Cam-operated limit switches, over-center arm lock, emergency disconnect and stop\/reset button on the cover. 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 460 VAC three-phase supply at the gate. Confirm site power before ordering.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad or post mount: post mount standard; pad mount uses the optional pedestal, part # 2110-183-BT.\u003c\/li\u003e\n\u003cli\u003eRight-hand\/left-hand convertible.\u003c\/li\u003e\n\u003cli\u003e1\/2, 3\/4 and 1 HP models in other voltages and three-phase are available in the SWG series.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675815747,"sku":"SWG-143","price":3235.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/IMG-2_bcc1ae95-72bb-45d4-b1fe-41445fe61c6c.jpg?v=1701451990"},{"product_id":"linear-osco-swc-211-1-2hp-swing-gate-operator","title":"LINEAR OSCO SWC-211 1\/2HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWC-211 is a 1\/2 HP, 115 VAC single-phase crank-arm swing gate operator for commercial gates up to 17 ft and 600 lb. Continuous duty, 11 to 14 seconds to open.\u003c\/p\u003e\n\u003cp\u003eAPeX controller with built-in MegaCode receiver, digital entrapment sensing, LED diagnostics, auto-close timer (0-9 minutes) and dual-gate networking over 3-wire shielded cable. 1\/2 HP PSC motor to a right-angle gear reducer and 1 in output shaft on a zinc-plated steel chassis under a UV-stabilized polyethylene cover. Regulated 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad mount standard. Post mount with the optional \u003ca href=\"\/products\/linear-osco-2120-483\"\u003e2120-483 post mount kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1\/2 and 1 HP SWC models in 115 VAC and 208\/230 VAC are available. For DC battery backup, see the SWD-211.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26675873347,"sku":"SWC-211","price":1965.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/swc_8336fa36-9f62-42fc-896a-23ab37c3a04e.jpg?v=1701383143"},{"product_id":"linear-osco-swc-221-1-2hp-swing-gate-operator","title":"LINEAR OSCO SWC-221 1\/2HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWC-221 is a 1\/2 HP, 208\/230 VAC single-phase crank-arm swing gate operator for commercial gates up to 17 ft and 600 lb. Continuous duty, 11 to 14 seconds to open.\u003c\/p\u003e\n\u003cp\u003eAPeX controller with built-in MegaCode receiver, digital entrapment sensing, LED diagnostics, auto-close timer (0-9 minutes) and dual-gate networking over 3-wire shielded cable. 1\/2 HP PSC motor to a right-angle gear reducer and 1 in output shaft on a zinc-plated steel chassis under a UV-stabilized polyethylene cover. Regulated 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad mount standard. Post mount with the optional \u003ca href=\"\/products\/linear-osco-2120-483\"\u003e2120-483 post mount kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1\/2 and 1 HP SWC models in 115 VAC and 208\/230 VAC are available. For DC battery backup, see the SWD-211.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26676814275,"sku":"SWC-221","price":1965.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/swc_4c3bc936-5fdf-4b6e-afbd-9fb51244f794.jpg?v=1701383148"},{"product_id":"linear-osco-swc-111-1hp-swing-gate-operator","title":"LINEAR OSCO SWC-111 1HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWC-111 is a 1 HP, 115 VAC single-phase crank-arm swing gate operator for commercial gates up to 19 ft and 1,000 lb. Continuous duty, 11 to 14 seconds to open.\u003c\/p\u003e\n\u003cp\u003eAPeX controller with built-in MegaCode receiver, digital entrapment sensing, LED diagnostics, auto-close timer (0-9 minutes) and dual-gate networking over 3-wire shielded cable. 1 HP PSC motor to a right-angle gear reducer and 1 in output shaft on a zinc-plated steel chassis under a UV-stabilized polyethylene cover. Regulated 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 115 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad mount standard. Post mount with the optional \u003ca href=\"\/products\/linear-osco-2120-483\"\u003e2120-483 post mount kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1\/2 and 1 HP SWC models in 115 VAC and 208\/230 VAC are available. For DC battery backup, see the SWD-211.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26676905731,"sku":"SWC-111","price":2335.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/swc.jpg?v=1701383128"},{"product_id":"linear-osco-swc-121-1hp-swing-gate-operator","title":"LINEAR OSCO SWC-121 1HP SWING GATE OPERATOR","description":"\u003cp\u003eThe Linear OSCO SWC-121 is a 1 HP, 208\/230 VAC single-phase crank-arm swing gate operator for commercial gates up to 19 ft and 1,000 lb. Continuous duty, 11 to 14 seconds to open.\u003c\/p\u003e\n\u003cp\u003eAPeX controller with built-in MegaCode receiver, digital entrapment sensing, LED diagnostics, auto-close timer (0-9 minutes) and dual-gate networking over 3-wire shielded cable. 1 HP PSC motor to a right-angle gear reducer and 1 in output shaft on a zinc-plated steel chassis under a UV-stabilized polyethylene cover. Regulated 24 VDC accessory power.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeeds a 208\/230 VAC single-phase supply at the gate.\u003c\/li\u003e\n\u003cli\u003eUL 325 requires monitored photo eyes or edges for each entrapment zone. Order them with the operator.\u003c\/li\u003e\n\u003cli\u003ePad mount standard. Post mount with the optional \u003ca href=\"\/products\/linear-osco-2120-483\"\u003e2120-483 post mount kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1\/2 and 1 HP SWC models in 115 VAC and 208\/230 VAC are available. For DC battery backup, see the SWD-211.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linear","offers":[{"title":"Default Title","offer_id":26676981443,"sku":"SWC-121","price":2335.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/files\/swc_426f0987-2abb-48d2-bf22-785da1c7f266.jpg?v=1701383136"},{"product_id":"dks-doorking-6100-secondary-unit","title":"DKS - Doorking 6100 Secondary Unit","description":"\u003cp\u003eThe DoorKing 6100-381 is the 1\/2 hp, 115 VAC secondary operator for dual swing gates using a 6100-380 primary. Each leaf up to 14 ft and 500 lb, 90° in about 10 seconds.\u003c\/p\u003e\u003cp\u003eSecondary unit only: it has no control board and runs from the primary operator's board through the interconnect cable. Self-adjusting magnetic limits, overlap for dual gates, tamper detect circuit and fail-safe release. UL 325 Class I and II, ETL listed.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e6100-381 secondary operator\u003c\/li\u003e\n\u003cli\u003e40 ft of primary\/secondary interconnect cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequires a 6100-380 primary operator; it will not run on its own.\u003c\/li\u003e\n\u003cli\u003eChoose post mount or pad mount hardware on this page; one is required.\u003c\/li\u003e\n\u003cli\u003eNeeds monitored external entrapment protection (photo eyes or edges) in each entrapment zone for UL 325 compliance; these are not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doorking","offers":[{"title":"Post Mount","offer_id":28510222659,"sku":"6100-081","price":2046.4,"currency_code":"USD","in_stock":true},{"title":"Pad Mount","offer_id":28510298819,"sku":"6100-081","price":2026.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/dks_6100_096688e1-e220-48c4-9a1b-f5ebaa4461e4.jpg?v=1474466248"},{"product_id":"dks-doorking-6300-1-2hp-secondary-swing-gate-operator","title":"DKS - Doorking 6300 1\/2HP Secondary Swing Gate Operator","description":"\u003cp\u003eThe DoorKing 6300-381 is the 1\/2 hp secondary operator for dual swing gates using a 6300-380 primary. Each leaf up to 18 ft and 700 lb, 90° in about 15 to 18 seconds.\u003c\/p\u003e\u003cp\u003eSecondary unit only: it has no control board and gets its power and commands from the primary through the 8-wire interconnect cable. Self-adjusting magnetic limits, overlap for dual gates, fail-safe release. UL 325 Class I-IV, ETL listed.\u003c\/p\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequires a 6300-380 primary operator of the same horsepower; it will not run on its own.\u003c\/li\u003e\n\u003cli\u003eIncludes a 50 ft primary\/secondary interconnect cable.\u003c\/li\u003e\n\u003cli\u003eChoose post mount or pad mount hardware on this page; one is required.\u003c\/li\u003e\n\u003cli\u003eNeeds monitored external entrapment protection (photo eyes or edges) in each entrapment zone for UL 325 compliance; these are not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doorking","offers":[{"title":"Post Mount","offer_id":28510621379,"sku":"6300-081","price":2667.6,"currency_code":"USD","in_stock":true},{"title":"Pad Mount","offer_id":28510621443,"sku":"6300-081","price":2667.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1320\/8633\/products\/dks_6300_d76ffd76-20fb-4ad3-a5ea-90acffe82672.jpg?v=1474467512"}],"url":"https:\/\/www.proteccontrols.com\/collections\/swing-gate-operators.oembed?page=5","provider":"Protec Controls","version":"1.0","type":"link"}