BD LOOPS EL 18-60 PREFORMED DIRECT BURIAL LOOP 3'X6' OR 4'X5' w/ 60' LEAD

BD Loops ITEM: EL 18-60
BD LOOPS EL 18-60 PREFORMED DIRECT BURIAL LOOP 3'X6' OR 4'X5' w/ 60' LEAD
BD LOOPS EL 18-60 PREFORMED DIRECT BURIAL LOOP 3'X6' OR 4'X5' w/ 60' LEAD
BD LOOPS EL 18-60 PREFORMED DIRECT BURIAL LOOP 3'X6' OR 4'X5' w/ 60' LEAD
BD LOOPS EL 18-60 PREFORMED DIRECT BURIAL LOOP 3'X6' OR 4'X5' w/ 60' LEAD

BD LOOPS EL 18-60 PREFORMED DIRECT BURIAL LOOP 3'X6' OR 4'X5' w/ 60' LEAD

BD Loops ITEM: EL 18-60
Regular price $113.75
/
  • Free shipping on most items over $200
  • We have 15+ years of industry experience
  • GSA, Net 30 and purchase orders available
Shipping calculated at checkout.

Description

**All BD Loops ship same day if ordered before 1pm cst **

Preformed Direct Burial Loops

Used for installations under concrete, asphalt, pavers, or in gravel roads. The most common installation is the loop tied directly to the rebar before concrete is poured. Wire is designed for a direct burial application. Unlike loops wrapped through PVC, The BD Loops Direct Burial Loop does not have an air pocket, resulting in fewer repeat service calls due to phantom detections caused by ground vibration.

Our BD Loops Direct Burial loops are build with Solid 16AWG copper wire to create a tough, rigid product that won’t fall below the rebar pattern. Installing a BD Loops Direct Burial loop over rebar is a snap! Simply offset the loop from the rebar pattern and tie it down with the supplied cable ties.

    • Extra layer of protection—Thick and durable outer jacket protects both loop and lead-in.
    • Each loop is tested 3 ways before it leaves the factory.
    • Lead-in wires are tightly bound in an protective outer jacket. Eliminating the need for twisting.
    • Flex Yoke Design with 1/2” coupler to accept PVC conduit for protecting the lead-in run.
    • The loop section is built with Solid 16AWG copper wire which makes it rigid and easy to form. In a concrete pour it won’t fall below the rebar pattern.
    • Unlike loops wrapped through PVC conduit, BD Loops Direct Burial Loops do not have an air pocket resulting in fewer repeat service calls due to phantom detections caused by ground vibration.
    • Every direct burial loop comes with zip ties for installation and loop function labels to label the lead-in wires for easy identification after installation.

    See below for a comprehensive training and educational library from BD Loops

    . Debunking Multi-Loop Configurations

    . BD Loops Debunks Industry Myth – Loop
    Wire Gauge

    . BD Loops Debunks Industry Myth – Solid
    Vs. Stranded Wire

    . BD Loops Debunks Industry Myth – High
    Voltage Lines And Loops.

    . BD Loops Debunks Industry Myth –
    Electrical Lines & Snow Melt Systems Near Loops

    Top 10 Saw-Cut Loop Tips & Tricks

    Replacing Old Loops? Read This!

    . An Introduction To Inductance Loops
    And Loop Phasing

    . Loops And The Effect Of Parallel,
    Series, And Phasing

    . Loops: How To Insure Proper Placement
    And Size

    . Myths And Facts About Saw-Cut Loops

    . Loops: Understanding And Preventing
    Phantom Detections And Air Pockets

    . The Importance Of Running The Lead-In
    Through Conduit

    . Training: Loops, Magnetism, And
    Twisted Lead-Ins

    . Choosing The Right Size Blade For
    Saw-Cut Loops

    . Saw-Cut Loop Tips And Tricks

    Tests

    . Loops And Power Lines

    . Loops And Snow-Melt Systems

    . Wire Gauge Comparison Test, Small & Large Loops.

    . 16AWG Vs. 24AWG Loop Detection
    Comparison

    . Polyethylene Pipe Insulation Test

    . Twisted Wire (In The Loop Itself) Test

    . Shovel Test – Running Lead-In Through
    Conduit

    . Phasing Test

    . TFFN / THHN Wire Test

    . 1/8″ Groove Test

    . Watch The Width

    . Stand Off Distance

    . Air Pocket Test

    How To

    . Direct Burial Preformed Loop
    Installation Instructions
     

    . Saw-Cut Preformed Loop Installation
    Instructions
     

    . Installing Loops Under Pavers

    . Loop Size Chart

    . How to Properly Meg a Loop

    . How to Make a Preformed Saw-Cut Loop
    Fit Every Time

    . Loop Sealant Tips and Tricks

    . Fully Seal the Saw-Cut Loop Yoke –
    Installation Trick

    . Modify a Saw-Cut Loop to a Direct
    Burial Loop.

    . Automatic Open (Free Exit) Loop
    Formula

    . Installing Loops in Asphalt

    . BD Loops Sand Trick

    . Saw-Cut Loop Tips and Tricks

    . Repair Saw-Cut Loop Yoke –
    Troubleshooting Trick

    . Inductance Loop Warning Sign

    All in stock orders typically ship the same business days or within 1-2 business days.  Cut off for same day shipping is 2:30PM Central Time.

    LEADTIME

    Items with lead times typically ship in 4-7 business days.

    FREE SHIPPING POLICY

    Orders with free shipping may have longer lead times due to those items being shipped the most economical way.  Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

    Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

    Read return policies

    Protec Controls accepts purchase orders please contact us.

    NET 30

    We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

    GOVERNMENT & GSA

    Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Reviews