Diablo Controls DSP-11 Loop Detector

Diablo Controls DSP-11 Loop Detector

  • Manufacturer: Diablo Controls
  • Item Number:

  • $85.00


DSP-11 Series, Vehicle Detector

Overview

Diablo Controls has been listening! We now offer a complete line of simple, switchless, single output vehicle detectors available with the industry standard 11-pin base.
This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. The detector loop inductance should be between 20 and 2000 microhenries.

This series of Diablo Controls detectors are covered by United States Patent number US 7,132,959 “Non-Interfering Vehicle Detection.”

Ordering Information
DSP-11-LV = Low voltage model (10 to 30 volts AC or DC)
DSP-11-117 = 117 volts AC
DSP-11-230 = 230 volts AC

Features

Works on any in-ground inductive loop from 20 to 2000 microhenries

Designed to be cross talk free between other loops

Automatically compensates for loop and lead-In sizes

Switchless, self-adapting to most common installations

Plug and play

Small profile, perfect for many installations

Fail safe operation

Wide low-voltage operation

The DSP-11-LV is protected from damage if plugged into a higher voltage.
No need to change a fuse or reset a circuit breaker, simply plug the detector into the proper voltage and it works.

Separate Power/Fail and Detect LEDs

Industry standard 11-pin connector in a small plastic case

  • Overview: Detector operates on any voltage from 10 to 30 volts AC or DC and draws about 35 milliamps of current with no vehicle on the loop.
    This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. The detector loop inductance should be between 20 and 2000 microhenries.

    LED Indicators: The green Power LED blinks once per second to indicate the detector is operating and powered.
    The red Detect LED will turn on when a vehicle is over the loop detection area.

    Loop or Wire Failures: In the case of a loop circuit failure, the green LED flashes slowly (twice per second) for an open loop circuit failure.
    The green LED will flash fast (10 times per second) to indicate a shorted loop circuit.

    Fail Safe vs Fail Secure: A fail safe detector will output “detect” when the loop circuit is failed. This is always useful on a safety loop.
    On the free exit loop this will keep the gate open until the situation is fixed. This is useful in applications where it is important to allow traffic flow to continue.
    A fail secure detector will never output “detect” when the loop circuit is failed. This will keep the gate closed. This is useful in high-security areas or installations where containment is needed.
    The DSP-11 is a fail safe detector. Note: Never use a fail secure detector on a safety loop.

    Output Relay Ratings: 1A at 125 VAC general use, 1A at 30 VDC

    Power: DSP-11-LV (10 to 30 volts AC or DC), DSP-11-117 (117 volts AC), DSP-11-230 (230 volts AC)

    Operating Temperature: -35° F to 165° F (-37° C to 74° C)

    Size: Height: 1.4" Width: 1.4" Depth: 2.75" overall

    Connector: Standard 11-pin (Amphenol 86CP11)

    Pin assignments are:
    Pin 1 (black wire) - Power in (See model type)
    Pin 2 (white wire) - Power in (See model type)
    Pin 5 (yellow wire) - Output relay common
    Pin 6 (blue wire) - Output relay N.O. - (closes for detect)
    Pin 7 (gray twisted wire) - Loop input
    Pin 8 (brown twisted wire) - Loop input
    Pin 10 (pink wire*) - Output relay N.C. - (opens for detect)
    *This wire is black (with white) on some harnesses.

 


Join Our Mailing List

Get our latest news and exclusive offers.

 

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods