Sure-Fi Relay Wireless Bridge - SFK-DS006-RELAY
Sure-Fi Relay Wireless Bridge - SFK-DS006-RELAY
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The Sure-Fi SFK-DS006-RELAY is a wireless relay bridge kit. Unit A and Unit B are factory paired and pass contact closures in both directions over 902-928 MHz frequency-hopping radio with AES128 encryption. Sure-Fi rates the radio link at up to 1 mile through obstructions and 50+ miles line of sight. Each unit runs on 12 VDC and mounts on 35 mm DIN rail or with screws to a wall.
Each unit has two relay outputs (NO, NC, COM) and two relay control inputs that trigger the matching relays on the paired unit. Each unit also has one digital input and one digital output (0-5 VDC). Unit A uses mechanical relays. Unit B uses solid-state relays with wet contacts available. Each unit has a 12 V SLA battery charger with UPS switchover. The Sure-Fi app connects over Bluetooth for setup, diagnostics and firmware updates. Chain more bridge pairs to go farther.
What's Included
- 1 Sure-Fi DS006-RELAY bridge system (one Unit A, one Unit B)
- 2 power supplies, 12 VDC 2.5 A output, 100-240 / 277 VAC input
- 2 power cords, 6 ft
- 1 Sure-Fi screwdriver
Before You Order
- Backup batteries are not included. Use 12 V sealed lead acid (SLA) batteries only.
- Relay inputs take a dry contact or 0-5 VDC. Do not exceed 5 VDC on any input or output pin.
- Unit A and Unit B relays have different ratings. Check the Sure-Fi manual before wiring a load.
- Need Wiegand data from a reader or keypad? See the Sure-Fi Wiegand Wireless Bridge (SFK-DS004-WIEGAND).
- Complete wireless solution for two relays in each direction between Unit A and Unit B
- Range: up to 1 mile through obstructions and greater than 50 miles line-of-sight
- Chain multiple system pairs for extended range
- Two relay outputs per unit NO, NC, COM terminals (Wet contacts available on Unit B only)
- One digital input: dry contact or digital voltage interface (0 to 5VDC), corresponds with digital output from paired unit
- One digital output: digital voltage output (0 to 5VDC), corresponds with digital input from paired unit
- Backup Battery charger and UPS function
- DIN rail mount or direct wall mount
- Sure-Fi APP connects via Bluetooth for configuration, diagnostics, and field firmware updates
- Link Budget: 163 dBm
- Operating Voltage: 12VDC +/- 5%
- Operating Power: 9 Watt (peak)
- Transmit Power: 1 Watt (30 dBm)
- Frequency Band: 902 - 928 MHz
- Channels: 72 (Frequency Hopping)
- Receiver Sensitivity: 133 dBm
- Security Encryption: AES128
- Operating Temperature: -40 °F - 185 °F
- Storage Temperature: -67 °F - 257 °F
- Operating Current: 0.08A (idle), 0.75A (transmit)
- Battery Backup Connection: 12V Sealed Lead Acid (SLA) Type
- Battery Charge Voltage: 13.75V maximum at standby
- Relays: 2A 250VAC / 2A 250VDC Wet or Dry: NO, NC, COM
- Mounting Options: DIN 35 (35mm x 7.5mm) or directly mount with two screws
- Range: Up to 1 mile through Obstructions And Greater than 40 Miles line-of-sight
Wireless link for access control and gate signals where pulling new wire or trenching is not practical.
- Card reader to access panel links
- Gate keypads at long driveways
- Gate operator open and relay signals
- Door strikes and mag locks
- Parking lot and remote gate entries
- Building to building access links
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com