LiftMaster SL3000UL Parts Diagram and Replacement Parts

Part of the EZ Parts Finder: pick a part on the diagram or use the list below.

This page holds the interactive parts diagram for the LiftMaster SL3000UL slide gate operator. Click any marked part to see its part number, or work from the list under the diagram. The views cover the cover, main chassis, side, drive, back, manual release, limit box and the two control area photos with the logic, expansion and motor drive boards.

Identify your model

The SL3000UL comes as the SL3000101UL (1 HP, 120 VAC single phase) and the SL3000501UL (1/2 HP). The board's diagnostic display shows SL followed by 30 for the SL3000UL operator type. For three phase sites LiftMaster offers the 3PHCONV kit, which converts 208 to 575 VAC input to 120 VAC.

Related models: LiftMaster SL585, LiftMaster RSL12UL, LiftMaster CSL24UL, LiftMaster IHSL24UL

Operator and manuals

Most ordered parts

Parts list by assembly

Main

Side

Drive

Back

Release

Part number Part
K29C-65AU2415 Liftmaster K29C-65AU2415 MOTOR CAPACITOR, Q027

Limit Box

Control Area

Common questions

What is the gate weight limit for the SL3000UL?

LiftMaster rates the SL3000501UL (1/2 HP) for 1,000 lb and the SL3000101UL (1 HP) for 2,000 lb, with up to 52 ft of gate travel.

How fast does the SL3000UL move the gate?

The maximum gate speed is 1 ft per second.

What goes on the drive chain?

LiftMaster says to lubricate the chain only with lithium spray.