LockeyUSA SUMO GL2 Gate Lock Manuals & Support

LockeyUSA GL2

The LockeyUSA SUMO GL2 is a surface mount mechanical keyless lever gate lock. It needs no power and no welding, and fits metal, vinyl, wood and composite gates, plus chain link with the GL2LINX adapter.

It comes in single or double combination, in marine grade black or satin chrome. A keyed lockout stops code entry, and the adjustable strike handles gate gaps up to 2 in.

Identify your model

GL2-JBMG is single combination in jet black, GL2-JBMGDC is double combination in black. SCMG models are satin chrome. Double combination models have a keypad on both sides.

Key specs

Type Mechanical keyless lever lock
Options Single or double combination
Gate thickness 1-1/4 to 3.5 in; up to 5 in with extension kit
Gate gap Up to 2 in
Size on gate 9-5/16 x 2-1/2 x 4 in
Material Zinc-plated steel, Teflon coated stainless interior
Finishes Jet black or satin chrome, marine grade

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Install the supplied gate stop and a slam prevention device such as a hydraulic gate closer. Spring closers without slam prevention void the warranty.

Lock binds or will not latch

  • Check that the mounting brackets sit flat on the fence and gate posts.
  • Check that the spindle was cut to the right length for the post thickness.

Lockout does not work

  • The lockout works on the pull side only. Mount Bracket A on the pull side of the gate.

Common questions

Yes, with the GL2LINX adapter. The GL2LINX158 fits 1-5/8 in gate frames and the GL2LINX178 fits 1-7/8 in frames, both on 3 to 4 in fence posts.

No. The SUMO GL2 is fully mechanical.

Yes. Change it before you finish the install, following the change code steps in the instructions.