HySecurity MX4125 - HY-5B Loop Detector ***New Part # MX4621***
HySecurity MX4125 - HY-5B Loop Detector ***New Part # MX4621***
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The HySecurity Hy5B 2.0 (part number MX4621, formerly MX4125) is a plug-in inductive loop vehicle detector for HySecurity Smart Touch, Smart DC and SmartCNX controllers. It plugs into a detector socket on the controller board. The board has four detector sockets: free exit, inside obstruction, outside obstruction and center loop. Power draw is about 35 mA, low enough for solar sites. Size is 1-3/4 x 3-5/8 in.
The detector sets sensitivity for each loop on its own. Auto sensitivity can be turned off to set sensitivity and boost by hand from the controller. The controller coordinates all installed Hy5B detectors to prevent crosstalk. The Hy5B counts vehicles, including tailgaters. A status LED shows the operating mode and loop faults, and a grounding terminal adds lightning protection.
What's Included
- Hy5B vehicle detector
- 3 plastic standoffs (2 used, 1 spare)
Before You Order
- Plugs into HySecurity Smart Touch, Smart DC and SmartCNX controllers.
- Full Hy5B features need Smart DC software 5.55 or higher or Smart Touch software 4.54 or higher. On older software the detector runs in Hy5A emulation mode.
- Software updates load from a laptop with HySecurity S.T.A.R.T. software.
- Direct replacement for the discontinued HY-5A (MX000041). No software update is needed to run it in Hy5A emulation mode.
- MX4125 is the earlier Hy5B part number. The current part number is MX4621 (Hy5B 2.0).
- Loop plus lead-in resistance should be 4.0 ohms or less, and resistance to earth ground 100 megohms or more.
- Use direct-burial loop wire such as XLPE or XHHW, not THHN. Terminals take 20-14 AWG wire.
- Loop wire is not included.
- Product Type: Plug-in inductive loop vehicle detector
- Model: Hy5B 2.0, MX4621 (formerly MX4125)
- Power: About 35 mA, supplied by the controller
- Detection: Inductive loop; auto sensitivity with manual override; vehicle counting
- Mounting: Plugs into Smart Touch, Smart DC or SmartCNX controller board
- Dimensions: 1-3/4 x 3-5/8 in (4.5 x 9.2 cm)
Plug-in vehicle detection for loops wired to HySecurity Smart Touch, Smart DC and SmartCNX gate and barrier operators.
- Free exit loops
- Obstruction (reversing) loops
- Center loops
- Parking lot vehicle counting
- Solar-powered gate sites
- Commercial slide and swing gates
- Barrier arm lanes
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com
