BD LOOPS BD-LS Loop Shield Sealant - GRAY
BD LOOPS BD-LS Loop Shield Sealant - GRAY
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
- 297 In-Stock & ready to ship
Description
BD Loops BD-LS Loop Shield is a one-part, moisture-curing, self-leveling MS polymer hybrid sealant in gray. It seals inductance loop wire in saw-cut grooves in concrete, asphalt, and other surfaces. Sold per 30 fl oz rigid plastic tube.
BD-LS is 100% solids with no solvents, so it does not shrink or dip after it cures. It goes on damp or dry surfaces and does not bubble when exposed to water. The cured seal stays flexible as the joint expands and contracts. It is UV and weather resistant, paintable, and resists yellowing. Skin-over time is about 45 minutes at 70°F and 50% relative humidity, and strength keeps building for 7 days. Traffic can cross right away if the groove is left slightly underfilled. VOC and California Prop 65 compliant. Made in the USA.
What's Included
- (1) 30 fl oz tube of BD-LS Loop Shield Sealant, gray
- (1) flat sealant tip
Before You Order
- Coverage per tube: about 20 ft in a 3/16 in x 1-1/4 in deep groove, 16 ft at 1-1/2 in deep. In a 1/4 in wide groove, about 15 ft at 1-1/4 in deep and 12 ft at 1-1/2 in deep.
- A 3/16 in blade and BD Loops 3/16 in preformed saw-cut loops use about 25% less sealant than a 1/4 in cut. Order one extra tube rather than run short on the job.
- Fill the groove in one pass from the bottom up with the flat tip.
- Not for freezing conditions. Minimum application temperature is 32°F, and cure slows as it gets colder. For cold-weather work, see the BD-LG2 two-part sealant.
- Uses a 30 fl oz caulk gun. BD Loops offers the BD-LS-GUN dripless gun.
- Also available in black.
- Self leveling.
- 100% Solids, will not shrink. No solvents.
- UV and weathering resistant.
- Does not bubble when exposed to water.
- Can be applied to damp/wet surfaces.
- Flat Sealant tip included with each tube of sealant.
- Seal the groove in 1 pass from the bottom up!
- 30 fl oz. rigid plastic tube.
- V.O.C. and California Prop 65 compliant.
- Paintable.
- Resists yellowing.
- Made in the USA.
See below for a comprehensive training and educational library from BD Loops
. Debunking Multi-Loop Configurations
. BD Loops Debunks Industry Myth – Loop
Wire Gauge
. BD Loops Debunks Industry Myth – Solid
Vs. Stranded Wire
. BD Loops Debunks Industry Myth – High
Voltage Lines And Loops.
. BD Loops Debunks Industry Myth –
Electrical Lines & Snow Melt Systems Near Loops
. Top 10 Saw-Cut Loop Tips & Tricks
. Replacing Old Loops? Read This!
. An Introduction To Inductance Loops
And Loop Phasing
. Loops And The Effect Of Parallel,
Series, And Phasing
. Loops: How To Insure Proper Placement
And Size
. Myths And Facts About Saw-Cut Loops
. Loops: Understanding And Preventing
Phantom Detections And Air Pockets
. The Importance Of Running The Lead-In
Through Conduit
. Training: Loops, Magnetism, And
Twisted Lead-Ins
. Choosing The Right Size Blade For
Saw-Cut Loops
. Saw-Cut Loop Tips And Tricks
Tests
. Wire Gauge Comparison Test, Small & Large Loops.
. 16AWG Vs. 24AWG Loop Detection
Comparison
. Polyethylene Pipe Insulation Test
. Twisted Wire (In The Loop Itself) Test
. Shovel Test – Running Lead-In Through
Conduit
How To
. Direct Burial Preformed Loop
Installation Instructions
. Saw-Cut Preformed Loop Installation
Instructions
. Installing Loops Under Pavers
. How to Make a Preformed Saw-Cut Loop
Fit Every Time
. Loop Sealant Tips and Tricks
. Fully Seal the Saw-Cut Loop Yoke –
Installation Trick
. Modify a Saw-Cut Loop to a Direct
Burial Loop.
. Automatic Open (Free Exit) Loop
Formula
. Saw-Cut Loop Tips and Tricks
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com