BD Loops E-Z Detector Checker

BD Loops ITEM: EZ Checker
BD Loops E-Z Detector Checker
BD Loops E-Z Detector Checker
BD Loops E-Z Detector Checker
BD Loops E-Z Detector Checker
BD Loops E-Z Detector Checker

BD Loops E-Z Detector Checker

BD Loops ITEM: EZ Checker
Regular price $149.50
/
  • Free shipping on most items over $200
  • We have 15+ years of industry experience
  • GSA, Net 30 and purchase orders available
Shipping calculated at checkout.

Description

Take the guess work out of your next gate servicing trip with the BD Loops E-Z Detector Checker. The only device of its kind that can help pinpoint what is causing the problem within a loop circuit by the art of substitution.

The BD Loops E-Z Detector Checker is a fully functional loop that fits in your hand, you simply hook it up in place of the currently installed loop to begin troubleshooting your system. The device has an LED light that lights up if the loop is being energized by the detector, which allows you to determine if the detector/harness wiring is sending power to the loop. With a press of the red button you can simulate a loop trip, and determine if the detector is functioning properly and make sure the gate operator is responding to the detector's command.  

Our philosophy is that installers should test the easy to replace components of the loop system first. You can’t fix a loop in the ground, so test it last and be confident in your diagnosis.  If your at home reading lamp stops working what do you do? You put a new light bulb in it to see if that fixes it. The E-Z Detector Checker does the same thing, it’s a new loop (lightbulb) for your loop circuit (lamp).

The E-Z Detector Checker tests the detector, and harness wiring/circuit board connection. It does not test the loop, the only way to test a loop is with a megohmmeter. The E-Z Detector Checker can also be used to help quickly calibrate open/close limits and swing timers.
We’ve had great success with the E-Z Detector Checker, it is a handy little device that can save your installers a lot of hassle when troubleshooting loop systems.


  • Unit is encased in a tough PVC shell.
  • Clip leads store in the back of the unit.
  • No batteries—unit is powered by the operator.
  • Quickly test the detector module, harness wiring, and circuit board loop connections with the press of a button.
  • Reduces the chance of cutting in a new loop when the real issue is the detector circuit or board.

See below for a comprehensive training and educational library from BD Loops

. Debunking Multi-Loop Configurations

. BD Loops Debunks Industry Myth – Loop
Wire Gauge

. BD Loops Debunks Industry Myth – Solid
Vs. Stranded Wire

. BD Loops Debunks Industry Myth – High
Voltage Lines And Loops.

. BD Loops Debunks Industry Myth –
Electrical Lines & Snow Melt Systems Near Loops

Top 10 Saw-Cut Loop Tips & Tricks

Replacing Old Loops? Read This!

. An Introduction To Inductance Loops
And Loop Phasing

. Loops And The Effect Of Parallel,
Series, And Phasing

. Loops: How To Insure Proper Placement
And Size

. Myths And Facts About Saw-Cut Loops

. Loops: Understanding And Preventing
Phantom Detections And Air Pockets

. The Importance Of Running The Lead-In
Through Conduit

. Training: Loops, Magnetism, And
Twisted Lead-Ins

. Choosing The Right Size Blade For
Saw-Cut Loops

. Saw-Cut Loop Tips And Tricks

Tests

. Loops And Power Lines

. Loops And Snow-Melt Systems

. Wire Gauge Comparison Test, Small & Large Loops.

. 16AWG Vs. 24AWG Loop Detection
Comparison

. Polyethylene Pipe Insulation Test

. Twisted Wire (In The Loop Itself) Test

. Shovel Test – Running Lead-In Through
Conduit

. Phasing Test

. TFFN / THHN Wire Test

. 1/8″ Groove Test

. Watch The Width

. Stand Off Distance

. Air Pocket Test

How To

. Direct Burial Preformed Loop
Installation Instructions
 

. Saw-Cut Preformed Loop Installation
Instructions
 

. Installing Loops Under Pavers

. Loop Size Chart

. How to Properly Meg a Loop

. How to Make a Preformed Saw-Cut Loop
Fit Every Time

. Loop Sealant Tips and Tricks

. Fully Seal the Saw-Cut Loop Yoke –
Installation Trick

. Modify a Saw-Cut Loop to a Direct
Burial Loop.

. Automatic Open (Free Exit) Loop
Formula

. Installing Loops in Asphalt

. BD Loops Sand Trick

. Saw-Cut Loop Tips and Tricks

. Repair Saw-Cut Loop Yoke –
Troubleshooting Trick

. Inductance Loop Warning Sign

All in stock orders typically ship the same business days or within 1-2 business days.  Cut off for same day shipping is 2:30PM Central Time.

LEADTIME

Items with lead times typically ship in 4-7 business days.

FREE SHIPPING POLICY

Orders with free shipping may have longer lead times due to those items being shipped the most economical way.  Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

Read return policies

Protec Controls accepts purchase orders please contact us.

NET 30

We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

GOVERNMENT & GSA

Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Reviews