Viking L-3 Parts Diagram and Replacement Parts

Part of the EZ Parts Finder: pick a part on the diagram or use the list below.

Find Viking L-3 slide gate operator parts on the interactive diagram below. Click a part in the photo to see its Viking part number, or use the list after the diagram. The views cover the operator cover, the main chassis with the battery and motor, the two power box photos, the motor and gear box, and the back of the unit with the loop rack.

Identify your model

The L-3 control board LCD shows L-3 SPS. Viking rates it for gates up to 60 ft and 1,600 lb, on 120 or 240 VAC single phase, 24 VAC/VDC or solar power. The H-10 is the larger model, rated for 75 ft and 2,200 lb. Check the LCD before ordering a motor or board.

Related models: Viking H-10

Operator and manuals

Most ordered parts

Parts list by assembly

Cover

Part number Part
VNXCV Viking L-3 Operator Cover - VNXCV

Main

Part number Part
DUBA12 Viking Battery - DUBA12
VNXL3MO Viking L-3 Motor - VNXL3MO

Power Box

Part number Part
VNXMPB Viking L-3 Modular Power Box Assembly - VNXMPB
DUMRS10 Viking DUMRS10 Battery Switch
VNXDUARS Viking L-3 Alarm Reset Switch - VNXDUARS
DUMRS10 Viking 120VAC Power Switch - DUMRS10
VNXF4A Viking 4 Amp Fuse - VNXF4A
VA120PL Viking 120V Receptacle - VA120PL
DUTT15 Viking L-3 Toroid Transformer - 15 amp - DUTT15

Motor

Part number Part
VNXSLEPS2 Viking Electronic Positioning Sensor (EPS) - VNXSLEPS2
VNXL3GB Viking L-3 Gear Box - VNXL3GB
VA-LR Viking VA-LR Loop Rack

Common questions

What size gate can the Viking L-3 run?

Viking rates the L-3 for gates up to 60 ft and 1,600 lb, with a 100% duty cycle.

What power can the L-3 use?

The main supply is 120 or 240 VAC single phase. Viking also lists 24 VAC/VDC (60VA) and solar as power options.

How do I move the gate by hand?

Lift the access door on the front of the cover and set the manual release switch to RELEASE. Set it back to ENGAGE for normal operation.