BEA LZR-FLATSCAN-LB Presence Sensor for Swing Doors - BLACK, LEFT SENSOR ONLY

BEA ITEM: 10LZRFLATSCAN-LB
BEA LZR-FLATSCAN-LB Presence Sensor for Swing Doors - BLACK, LEFT SENSOR ONLY
BEA LZR-FLATSCAN-LB Presence Sensor for Swing Doors - BLACK, LEFT SENSOR ONLY

BEA LZR-FLATSCAN-LB Presence Sensor for Swing Doors - BLACK, LEFT SENSOR ONLY

BEA ITEM: 10LZRFLATSCAN-LB
Regular price $552.00
/
  • Free shipping on most items over $200
  • We have 15+ years of industry experience
  • GSA, Net 30 and purchase orders available
Shipping calculated at checkout.

Description

***LEFT SENSOR ONLY***

SINGLE CURTAIN STAND-ALONE, DOOR-MOUNTED SAFETY SYSTEM FOR FULL AND LOW ENERGY SWING DOORS

BEA’s LZR®-FLATSCAN SW is a LASER-based Time-of-Flight presence sensor for use as a stand-alone safety sensor on automatic pedestrian swing doors. This solution can also be used as a reactivation sensor on the approach side of low energy doors.

This superior technology generates 170 detection points across a single curtain, which allows LZR-FLATSCAN SW to cover the entire face of a single door leaf including the hinge area.

Finger Detection Technology™ utilizes 100 detection points within the hinge area of the door, protecting hands and fingers while the door is in motion.

The LZR-FLATSCAN SW is capable of exceeding the 156.10 section 8.2.2.3 standard for detection area and meets section 8.1.4 for monitoring.

• Leading edge safety

Detection area extends beyond the leading edge of the door for enhanced safety

• Hand Gesture Setup™

Easy door width programming using Hand Gesture Setup™ reduces configuration time

• UL10B/C Listed

Fire rated for up to one hour

• Reduced uncovered zone

LASER technology provides a reduced uncovered zone of down to 3/4 inch

• Background independence

LASER technology ensures independence of all types of flooring (pedi-mats, carpet, reflective flooring, wet surfaces, etc.) and the surrounding environments of the door (guiderails, walls, weather)

Does an LZR-FLATSCAN have to be installed on each side of the door?

Yes, for full-energy applications. No, for Low Energy applications, a single sensor can be used on the approach side of the swing door in Static Mode.

Can the LZR-FLATSCAN be powered by a 24VAC transformer?

No, the LZR-FLATSCAN requires DC power. A 12VAC transformer and rectifier may be used or the LZR-MICROSCAN power supply.

How can the LZR-FLATSCAN be inhibited on a knowing-act door without a secondary reactivation input?

You will need to use a Door Position Switch with an LE21 or a BR3X on function 22.

Can the LZR-FLATSCAN relays be set so that one is N.O. and the other is N.C.?

Yes, using the BEA Remote Control.

Can the LZR-FLATSCAN be used on a revolving door?

Yes, in Static Mode. See Application Note 76.0028 (available at www.BEAsensors.com).

After doing a factory reset using the Remote Control, why is the LZR-FLATSCAN LED blinking orange and the sensor is not functioning?

Set all of the DIP switches to ON and then perform a factory reset.

Can the LZR-FLATSCAN be installed onto doors with exit hardware?

Yes, but the spacer must be used.

Are the LZR-FLATSCAN sensors handed (i.e. left-handed and right-handed) like the LZR-MICROSCAN T?

Yes.

Why is the LZR-FLATSCAN LED blinking yellow after setting DIP switch 1 for the approach side?

After any DIP changes, you must press the setup button for 3+ seconds to confirm the change.

Can the pattern for the LZR-FLATSCAN be manually adjusted?

Yes, the width and height can be adjusted using the BEA Remote Control.

All in stock orders typically ship the same business days or within 1-2 business days.  Cut off for same day shipping is 2:30PM Central Time.

LEADTIME

Items with lead times typically ship in 4-7 business days.

FREE SHIPPING POLICY

Orders with free shipping may have longer lead times due to those items being shipped the most economical way.  Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

Read return policies

Protec Controls accepts purchase orders please contact us.

NET 30

We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

GOVERNMENT & GSA

Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Reviews