DoorKing eVolve 2112 Manuals & Support

The DoorKing eVolve 2112 is a video entry system with a built-in IP camera. Visitors call a resident, who answers on their phone and opens the gate, and residents use the DKS 2112 app.

It holds up to 10 residents with up to four phone numbers each and 50 entry codes, with three relays. It comes in surface, curved surface and flush mount, and the flush mount fits DoorKing's lighted kiosk.

Identify your model

The 2108 and 2112 share the eVolve 2100 series manual for circuit board 8863-010 Rev C or higher. All programming is done at dks2112.com.

The 2112-565 kit replaces an 1812 Classic or 1812 Plus with eVolve parts.

Key specs

Residents Up to 10, four phone numbers each
Entry codes Up to 50, 4 or 5 digits
Relays 3 Form C, 1 A max, independent strike times
Camera Built-in IP camera
Power 16.5 VAC, 20 VA, or 12 to 24 VDC
Mounts Surface, curved surface, flush, kiosk
Board 8863-010 Rev C or higher

Manuals and documents

Installation Manual

Troubleshooting

All programming is done online. Check the system shows as online before checking wiring.

Display or camera off

  • Check for 16.5 VAC or 12 to 24 VDC at the power input.
  • Do not power strikes or magnetic locks from the 2100 transformer.

Calls do not go out

  • Check the internet or cellular connection and the system status on the website.

Gate does not open

  • Check which relay answers Tone Open and the entry code for that resident.
  • Check the relay strike time and the wiring to the operator.

Common questions

Yes. DoorKing's 2112-565 replacement kit fits 1812 Classic and 1812 Plus surface and flush mounts.

At dks2112.com in a web browser. No programming is done at the keypad.

Mount it at least 6 ft from a gate or gate operator, or where the user cannot reach the gate while using it. Card readers on DoorKing's instructions call for 10 ft.