Teclados

How to Choose a Gate Keypad

Wired or Wireless

A wired keypad runs low voltage cable back to the operator and connects to its open input. It is the better choice for busy commercial gates. A wireless keypad works like a remote mounted on a post, so it must match the radio in your receiver, such as LiftMaster Security+ 2.0 or Linear MegaCode. No trenching, but batteries need replacing.

Standalone or Wiegand

• Standalone: stores codes in the keypad and fires its own relay. Simple and self contained.
• Wiegand output: sends the code to a separate access controller, which decides who gets in. Use this when the keypad is part of a larger system.
• Combo keypad and prox reader: accepts both codes and cards or fobs from our prox card range.

Code Capacity and Features

Count users and add room to grow. Basic wireless keypads hold a few codes, while commercial models hold hundreds or thousands. Useful extras include backlit keys, time limited codes, a second relay for a pedestrian gate, and a built in intercom.

Mounting and Climate

Post mount keypads go on a gooseneck at driver height. Single gang and mullion models fit a wall or door frame. In cold climates a heated keypad or weather shield keeps keys working. Check the supply voltage, usually 12 or 24 volts, against your operator's accessory power.

Common Questions

How do I program a gate keypad?

Most keypads use a master code to enter programming mode, then you add or delete user codes from the keys. Wireless keypads also need to be learned to the receiver, just like a new remote.

Will a wireless keypad work with my gate opener?

Only if it uses the same radio code as the receiver. Check your remotes and receiver brand first, or add a matching receiver from our transmitters and receivers.

Can a keypad also take visitor calls?

Some keypads include an intercom. For directory calling, look at telephone entry systems.