DoorKing ProxPlus and DK Prox Readers Manuals & Support

DoorKing makes two families of card readers. DK Prox readers read standard proximity cards at 2 to 4 in, in mullion, single gang and post mount styles.

ProxPlus Secure readers run at 13.56 MHz and read only encrypted ProxPlus Secure cards. All of them output 26-bit Wiegand to an access controller.

Identify your model

DK Prox models: 1815-300 (up to 3 in), 1815-301 (up to 4 in) and 1815-302 (up to 2 in). ProxPlus Secure models: 1815-684 mullion and 1815-685 single gang.

For long range vehicle tags see the 1815-350.

Key specs

Output 26-bit Wiegand
DK Prox range 2 to 4 in, by model
ProxPlus Secure 13.56 MHz, encrypted cards only
Mounting Mullion, single gang box or post
ProxPlus warranty 5 year limited

Manuals and documents

Spec Sheet

Troubleshooting

Card does not read

  • Check that the card type matches the reader. ProxPlus Secure readers read only ProxPlus Secure cards.
  • Check the Wiegand wiring and power at the controller.

Reads but access denied

  • Check that the card and facility code are programmed in the access controller.

Common questions

No. It reads only ProxPlus Secure cards.

An access controller that takes 26-bit Wiegand, such as the DoorKing 1835, 1837 or 1838.

Mount it at least 6 ft from a gate or gate operator, or where the user cannot reach the gate while using it. Card readers on DoorKing's instructions call for 10 ft.