BEA LZR-FLATSCAN-RS Presence Sensor for Swing Doors - SILVER, RIGHT SENSOR ONLY
BEA LZR-FLATSCAN-RS Presence Sensor for Swing Doors - SILVER, RIGHT SENSOR ONLY
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The BEA LZR-FLATSCAN-RS is a single right sensor for the LZR-FLATSCAN SW, a single-curtain laser presence sensor for automatic swing doors. It uses Time-of-Flight laser scanning, mounts on the door leaf, and runs on 12-24 VDC. Range is up to 13 ft (diagonal). Color: silver.
It works as a stand-alone safety sensor on full energy and low energy swing doors. The curtain has 170 detection points and covers the full face of one door leaf, including the hinge area. Finger Detection Technology uses 100 of those points in the hinge area while the door moves. The field reaches past the leading edge, and the uncovered zone can be as small as 3/4 in. Setup is by hand gesture or the BEA 10REMOTE. BEA states it exceeds ANSI A156.10 section 8.2.2.3 for detection area and meets section 8.1.4 for monitoring.
What's Included
- One right LZR-FLATSCAN SW sensor, silver
Before You Order
- This is one right sensor only. For a left and right pair, see the LZR-FLATSCAN-SWS kit.
- Same sensor comes in black, silver and white. Versions: L / R (single left or right sensor), LEL / LER (low energy, left or right door mount), SW (left and right full energy kit).
- Power: 12-24 VDC. BEA lists 10PS12-24, 10PSMDR2024, 10PSST242 and 10PSVR5T power supplies as accessories.
- Outputs: 2 electronic relays, 42 VAC/VDC max, 100 mA max. Test input for door control monitoring. Housing is IP54.
- Fire rating: BEA lists the UL 10B/C 1-hour fire rating for the black version only. For a fire-rated door, use the black version.
- For glass doors, add the 10LZRFLATSCANGDA Glass Door Accessory. Spacers (70.5751 white, 70.5752 silver, 70.5753 black) and the 20.5433 control harness are sold separately.
• Leading edge safety
Detection area extends beyond the leading edge of the door for enhanced safety
• Hand Gesture Setup™
Easy door width programming using Hand Gesture Setup™ reduces configuration time
• UL 10B/C fire rating applies to the black version only (per BEA)
• Reduced uncovered zone
LASER technology provides a reduced uncovered zone of down to 3/4 inch
• Background independence
LASER technology ensures independence of all types of flooring (pedi-mats, carpet, reflective flooring, wet surfaces, etc.) and the surrounding environments of the door (guiderails, walls, weather)
Does an LZR-FLATSCAN have to be installed on each side of the door?
Yes, for full-energy applications.
No, for Low Energy applications, a single sensor can be used on the approach side of the swing door in Static Mode.
Can the LZR-FLATSCAN be powered by a 24VAC transformer?
No, the LZR-FLATSCAN requires DC power. A 12VAC transformer and rectifier may be used or the LZR-MICROSCAN power supply.
How can the LZR-FLATSCAN be inhibited on a knowing-act door without a secondary reactivation input?
You will need to use a Door Position Switch with an LE21 or a BR3X on function 22.
Can the LZR-FLATSCAN relays be set so that one is N.O. and the other is N.C.?
Yes, using the BEA Remote Control.
Can the LZR-FLATSCAN be used on a revolving door?
Yes, in Static Mode. See Application Note 76.0028 (available at www.BEAsensors.com).
After doing a factory reset using the Remote Control, why is the LZR-FLATSCAN LED blinking orange and the sensor is not functioning?
Set all of the DIP switches to ON and then perform a factory reset.
Can the LZR-FLATSCAN be installed onto doors with exit hardware?
Yes, but the spacer must be used.
Are the LZR-FLATSCAN sensors handed (i.e. left-handed and right-handed) like the LZR-MICROSCAN T?
Yes.
Why is the LZR-FLATSCAN LED blinking yellow after setting DIP switch 1 for the approach side?
After any DIP changes, you must press the setup button for 3+ seconds to confirm the change.
Can the pattern for the LZR-FLATSCAN be manually adjusted?
Yes, the width and height can be adjusted using the BEA Remote Control.
Door-mounted laser safety sensor used on full energy and low energy automatic swing doors.
- Full energy automatic swing doors
- Low energy automatic swing doors
- Hinge-side finger protection on the door leaf
- Approach and swing side door coverage
- Glass doors (with the 10LZRFLATSCANGDA)
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com