Buscador de piezas de Hysecurity StrongarmPark DC
Eléctrico
Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Use these clickable drawings to find parts for the HySecurity StrongArmPark DC barrier arm operator. Pick a part in a drawing to see its part number. The first drawing covers the chassis, drive and electrical parts. The second shows the electrical box. The list under the drawings adds the arm hardware, such as oval arms, breakaway brackets and end caps.
Identify your model
The StrongArmPark DC comes as the DC 10 and the DC 14, and the arm length tells them apart. The DC 10 takes arms up to 10 ft and opens in 1.5 to 2.5 seconds. The DC 14 takes 10 to 14 ft arms, uses a spring assist and opens in 2.5 to 3.5 seconds. Solar versions are the DCS 10 and DCS 14.
Related models: HySecurity StrongArm
Operator and manuals
- Operator: HySecurity StrongArmPark DC 10 Barrier Arm Gate Operator
- Quick start (MX3651-01) (PDF)
- Spec sheet (PDF)
- Parts diagrams (PDF)
Most ordered parts
- Detector de bucle Hysecurity MX4125/ MX4621 HY-5B (MX4621)
- Conjunto MX3680, soporte desprendible (MX3680)
- Conjunto de brazo Hysecurity MX4182-14, aluminio, ovalado, 14 pies. (MX4182-14)
- Arnés de cables Hysecurity MX4122, luz LED/interruptor de apagado (MX4122)
- MX3219 Objetivo, sensor, brazo (MX3219)
- MX3555 Tapa, extremo, brazo ovalado (MX3555)
- Kit de interruptor de seguridad Hysecurity MX4402 (MX4402)
- Placa Hysecurty MX3037-0, controlador de CC inteligente (MX3037-0)
Parts list by assembly
Chassis, Drive and Electrical
Electrical
Arm Hardware
Common questions
What battery backup does the StrongArmPark DC have?
It uses two 12V, 8Ah batteries. HySecurity lists up to 1,000 cycles after AC power loss, depending on arm size, battery health, temperature and accessories.
What arm length does each model take?
The DC 10 takes arms up to 10 ft. The DC 14 takes arms from 10 to 14 ft and uses a spring assist.
Do the limits reset if the batteries run down?
No. HySecurity states that even if AC power is lost and the batteries are fully drained, the limits remain intact. There are no physical limit switches.