EMX OWL Manuals & Support
Identify your model
The OWL has a hinged housing with a microwave tilt adjustment and left and right infrared arrays. It is set up only with the OWL-RC remote. EMX also makes the RAVEN and HAWK 2 sensors. See the RAVEN support page.
Key specs
| Technology | Microwave motion plus infrared presence |
|---|---|
| Mounting height | 11.5 to 21.3 ft |
| Motion field | About 23 ft long x 19 ft wide at 21 ft |
| Presence field | About 18 ft long x 26 ft wide at 21 ft |
| Power | 12 to 24 VDC or VAC, 150 mA max at 12 VDC |
| Outputs | 2 relays, NO/NC selectable |
| Cable | 32 ft, 8 conductor |
| Housing | IP65, 9 x 5 x 5 in |
| Operating temperature | -4 to 140 °F |
Manuals and documents
Installation Manual
-
OWL Instruction Manual
View PDF: OWL Instruction Manual (opens in a new tab)
Quick Start
-
OWL Quick Start Guide
View PDF: OWL Quick Start Guide (opens in a new tab)
Spec Sheet
-
OWL Spec Sheet
View PDF: OWL Spec Sheet (opens in a new tab)
Troubleshooting
Common questions
Yes. The OWL has no buttons for setup. The OWL-RC remote sets the presence area, direction filter, hold time and other settings.
Mount it 11.5 to 21.3 ft high above the door or gate opening.
Yes. The microwave motion output can be set to detect vehicles and ignore pedestrians, while the infrared output still holds the door for anyone in the opening.