Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Browse photos of the DoorKing 9150 slide gate operator to locate the part you need. The views run from the plastic cover to the main chassis, the front switches, the drive section, the top idlers, the inside of the housing and the solenoid release. The list below gives DoorKing part numbers for the 1 HP 115V model, such as the motor, V-belt, pulley and clutch pad.
Identify your model
The 9150 operator specification decal lists the model, serial number, volts and phase, amps and maximum gate load. The 9150 comes in 1/2 HP and 1 HP versions, both 115 VAC single phase. The 1/2 HP model is rated for 1,000 lb and 30 ft, and the 1 HP model for 1,500 lb and 45 ft. Higher voltages use the 2600-266 high voltage kit.
Operator and manuals
- Operator: DKS - Doorking 9150-380 1HP Slide Gate Operator
- 9150 installation manual (PDF)
- 9150 quick start (PDF)
- 9150-080 parts breakdown (IPB 9150-880) (PDF)
Most ordered parts
- Doorking 2600-466 Rear Bearing Assembly (2600-466)
- Doorking 2600-847 Resistor Power 1 ohm 65 watt (2600-847)
- Doorking 2600-904 Drive Shaft Assembly (2600-904)
- Doorking 2600-694 V-Belt (2600-694)
- DoorKing 2801-004 Clutch Pad (2801-004)
- Doorking 2600-917 Jam Nut Magnet Sub Assembly (2600-917)
- Doorking 2600-860 Solenoid Lock Assembly (2600-860)
Parts list by assembly
Main
| Part number | Part |
|---|---|
| 2600-938 | Doorking 2600-938 Radio Tray/Shelf |
| 2600-847 | Doorking 2600-847 Resistor Power 1 ohm 65 watt |
| 2600-852 | Doorking 2600-852 Chain Accessory Box for 9150 Operator |
Drive Section
| Part number | Part |
|---|---|
| 2600-162 | Doorking 2600-162 1HP Motor for 9150/6300 |
| 2600-694 | Doorking 2600-694 V-Belt |
| 2600-957 | Doorking 2600-957 Pulley, 10" |
| 2801-004 | DoorKing 2801-004 Clutch Pad |
| 2600-904 | Doorking 2600-904 Drive Shaft Assembly |
| 2600-466 | Doorking 2600-466 Rear Bearing Assembly |
| 2600-931 | Doorking 2600-931 Shaft Support Bracket, 915 |
| 2600-917 | Doorking 2600-917 Jam Nut Magnet Sub Assembly |
Release
| Part number | Part |
|---|---|
| 2600-860 | Doorking 2600-860 Solenoid Lock Assembly |
Common questions
What size gate can the DoorKing 9150 run?
DoorKing rates the 1/2 HP 9150 for gates up to 1,000 lb and 30 ft, and the 1 HP version for 1,500 lb and 45 ft.
How does the 9150 manual release work?
The factory installed Fail-Safe release needs no keys, cranks or tools to put the gate in manual operation. Use it only when the gate is not moving.
Can the 9150 run on 208 to 575 VAC?
Yes, with the optional 2600-266 high voltage kit. The standard operators are 115 VAC single phase.