Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
The diagram below maps replacement parts for the three phase Linear VS-GSLG slide gate operator. Select a part in any photo to read its part number. Everything is also listed below by assembly. The views show the main unit, the drive section with motor and brake, the control box, the limit box, the gearbox and the drive shaft with its pillow block bearings.
Identify your model
On a three phase VS-GSLG, the controller description reads 3-Phase along with the horsepower and voltage. The motors are listed as 208/230/460V three phase. Gate speed is set in Hz on the Hitachi drive, with a factory maximum of 95 Hz. Have the serial number ready when you order.
Related models: Linear VS-GSLG Single Phase
Operator and manuals
- Operator: Linear OSCO VS-GSLG-223 1/2 HP Variable Speed Slide Gate Operator
- VS-GSLG installation manual (PDF)
- VS-GSLG spec sheet (PDF)
- VS-GSLG electrical drawing (PDF)
Most ordered parts
- Linear 2200-030 Limit Nut (2200-030)
- Linear 620-101293 Apex II (620-101293)
- Linear 2500-764 Limit Switch (2500-764)
- Linear OSCO 2500-1980 AC 3Phase Motor Board (2500-1980)
- Linear 2500-2397 BRAKE C-FACE 208/230/460VAC (2500-2397)
- Linear 2500-2315-UPS MTR-L 1H 230/460-3 W/Har Ups (2500-2315-UPS)
- Linear 2500-2347 SWITCH LIMIT SPDT OMRON D2VW (2500-2347)
- Linear 2500-2393 APEX Control Board (2500-2393)
Parts list by assembly
Main
| Part number | Part |
|---|---|
| 2510-248 | Linear 2510-248 Stop/Reset Button and Bracket Assembly |
Drive Section
| Part number | Part |
|---|---|
| 2500-2315-UPS | Linear 2500-2315-UPS MTR-L 1H 230/460-3 W/Har Ups |
| 2500-372 | Linear 2500-372 MTR 2HP TE CF 3P 230/460 |
| 2500-2397 | Linear 2500-2397 BRAKE C-FACE 208/230/460VAC |
| 2200-605 | Linear 2200-605 #40 Chain, 37 Links |
| 2200-817 | Linear 2200-817 Belleville Washer |
| 2100-1650 | Linear 2100-1650 PLATE TOR LIM VS/GSLG VGROOVE |
| 2300-390 | Linear 2300-390 Friction Disc (Pair) |
| 2210-004 | Linear 2210-004 Sprocket, 40 A 48, with Bearing |
| 2200-551 | Linear 2200-551 REDUCER GEAR 10:1 VS-GSLG GSL |
| 2200-654 | Linear 2200-654 Limit Shaft Chain (#48 / 30 Links) |
| 2100-910 | Linear 2100-910 Lever Disconnect Locking HSLG |
| 2200-291 | Linear 2200-291 Shifter and Locking Lever Spring |
| 2120-132 | Linear 2120-132 Shifter Lever Assembly |
Control Box
| Part number | Part |
|---|---|
| 620-101293 | Linear 620-101293 Apex II |
| 2500-2393 | Linear 2500-2393 APEX Control Board |
| 2500-2084-HALF | Linear 2500-2084-HALF CONTACTOR 24VAC 4-POLE AB HALF |
| 2520-525 | Linear 2520-525 Harness Complete HSLG 1P Apex |
| 106604 | Linear 106604: Local Antenna |
| 2510-530 | Linear 2510-530 VFD 1/2HP & 1HP 230v 3P |
| 2510-535 | Linear 2510-535 VFD 1HP 1/2HP 460v 3P |
| 2500-2291 | Linear 2500-2291 SWITCH MTR STARTER 30A 2P 600V |
| 2500-1980 | Linear OSCO 2500-1980 AC 3Phase Motor Board |
Limit Box
| Part number | Part |
|---|---|
| 2200-030 | Linear 2200-030 Limit Nut |
| 2100-057-UPS | Linear 2100-057-UPS LIMIT SHAFT STANDARD UPS |
| 2500-2347 | Linear 2500-2347 SWITCH LIMIT SPDT OMRON D2VW |
| 2500-764 | Linear 2500-764 Limit Switch |
Gearbox
| Part number | Part |
|---|---|
| 2200-115 | Linear 2200-115 Disconnect Collar Spring |
| 2110-131 | Linear 2110-131 Disconnect Block Assembly |
| 2110-364 | Linear 2110-364 Sprocket, 40A24 w/ Bearing, GSLG-A |
| 2400-017 | Linear 2400-017 Flat Washer, 3/8" |
Drive Shaft
| Part number | Part |
|---|---|
| 2100-1737 | Linear 2100-1737 Pillow Block Retaining Plate |
| 2100-1738-UPS | Linear 2100-1738-UPS Output Shaft |
| 2200-042-PLT | Linear 2200-042-PLT 48-B-15 Sprocket, 1" Bore |
Common questions
What does the VS-GSLG need every six months?
Linear lists greasing the pillow block bearings, cleaning and oiling the main drive chain and sprockets with 40W oil, checking chain tension and making sure the gate moves freely by hand.
What gets checked every 12 months?
Check clutch tension and disc wear, limit switch adjustment and wear, tighten all nuts and bolts, and top up the gear reducer with #90/140 oil.
How is the gate speed set?
Speed is set in Hz on the Hitachi drive. The factory settings are a 95 Hz maximum and a 20 Hz minimum.