Accura Bottom Guide Rollers Manuals & Support

Accura 30945 / 30946

Accura bottom guide rollers keep a cantilever slide gate in line at the bottom. The first roller face can sit 3-1/4 in from a 4 in round post.

The 3 in rollers run on sealed bearings. Accura is made by Larsen Innovations.

Buy the 30945 / 30946 (2 options)

Identify your model

30945: guide roller assembly. 30946: 4 in guide roller with cover. Slots allow up to 7-1/2 in between roller faces.

Key specs

Rollers 3 in, sealed bearings
Bracket 5/16 in steel
Spacing Up to 7-1/2 in between faces
Posts 4 in round or square
Mount 1/2 in U-bolt, sold apart

Manuals and documents

Spec Sheet

Troubleshooting

Gate bounces or binds

  • Check that all rollers are level and in line.
  • Set the wheels so the gate frame rides centered.

Roller wears fast

  • Check for rollers out of line or a gate out of balance.
  • Replace worn wheels or bearings as a set.

Common questions

4 in round or square, with the right U-bolt.

No.

Yes. Covers are included to help meet ASTM F2200.