Aether RF Wiegand Wave Wireless Bridge Manuals & Support

Aether RF Wiegand Wave

The Aether RF Wiegand Wave is a pair of radios that carry Wiegand data and two contact inputs between a gate reader or keypad and the access panel.

It runs at 902-928 MHz with frequency hopping. Each unit has two relays and a terminal for a backup battery.

Buy the Wiegand Wave

Identify your model

Wiegand Wave: sold as a pair with 2 antennas and 2 power supplies.

Key specs

Radio 902-928 MHz, 128 hopping channels
Range Up to 25 miles line of sight
Power 16 to 24 VAC/VDC, 12 V SLA backup
Data Wiegand 4 to 64 bit, OSDP
Relays 2, NO/NC/COM, 1.5 A at 12 VDC
Board 5.7 x 4.4 in

Manuals and documents

Installation Manual

Troubleshooting

Units do not pair

  • Power both units on the bench and pair them before you mount them.
  • Check the DIP switch settings in the guide.

Data drops

  • Keep a clear path between the antennas.
  • Mount the antennas high and tight.

Common questions

No. Mount each unit in a weatherproof box.

Wiegand codes and two contact inputs that trigger relays on the other unit.

Yes, a 12 V sealed lead acid battery.