BD Loops BD Pizza Wheel Loop Wire Insertion Tool Manuals & Support

BD Loops PR-3/16

The BD Loops Pizza Wheel is a hand tool that pushes loop wire to the bottom of a 3/16 in saw cut. It seats the wire without nicking the jacket.

It comes as the PR-3/16 kit.

Buy the PR-3/16

Identify your model

A wheel on a long handle, sized for a 3/16 in slot.

Key specs

Slot 3/16 in
Kit PR-3/16
Use Seat saw-cut loop wire

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Wire floats up in the slot

  • Run the wheel over the wire again before sealing.
  • Use backer rod over the wire if the sealant chart calls for it.

Common questions

A 3/16 in saw cut.

A screwdriver can cut the wire jacket. The wheel rolls the wire down without damage.

Yes. Use it for BD SC loops and for loose loop wire.