D&D Technologies Shut It BadAss Hinges Manuals & Support

D&D Technologies CI3000 / CI3100 / CI3850

Shut It BadAss hinges are weld-on hinges for steel and ornamental iron gates. The CI3850 set has one self-closing hinge and one Original hinge for gates up to 300 lb.

The self-closing hinge has 5 tension settings. The bearings are sealed and need no grease.

Buy the CI3000 / CI3100 / CI3850 (3 options)

Identify your model

CI3000: Original BadAss hinge. CI3100: Original, rusted finish. CI3850: self-closing set.

Key specs

Self-closing limit 300 lb
Tension 5 settings
Swing -5 to 110 degrees
Mount Weld-on
Gate gap 2-1/2 to 3 in

Manuals and documents

Installation Manual

Other documents

Troubleshooting

Gate sags or drags

  • Tighten the hinge bolts.
  • Use the height and depth adjustments to level the gate.

Gate does not self-close

  • Raise the spring tension one setting.
  • Check that the gate is level and not binding at the latch.

Common questions

Up to 300 lb.

No. The closer is in the hinge. Add a latch.

Follow the Shut It welding card. Keep heat off the bearing.

Buy the D&D Technologies Shut It BadAss Hinges

D&D Technologies CI3000 Original BadAss weld-on gate hinge
D&D Technologies Shut It CI3000 Original BadAss Hinge
D&D Technologies
D&D Technologies CI3100 Original BadAss hinge, rusted finish
D&D Technologies Shut It CI3100 Original BadAss Hinge - Rusted Finish
D&D Technologies
D&D Technologies CI3850 Self-Closing BadAss hinge-closer set
D&D Technologies Shut It CI3850 Self-Closing BadAss Hinge-Closer Set
D&D Technologies