D&D Technologies SlimLine Hydraulic Gate Closer Manuals & Support

D&D Technologies DC622G

The SlimLine DC622G is a vertical hydraulic gate closer for gates up to 330 lb and 4 ft 3 in wide. It mounts on the post or wall with a guide rail on the gate.

Closing and latch speed adjust apart. There are 14 mounting options with no welding.

Buy the DC622G (4 options)

Identify your model

DC622G-R: right hand. DC622G-L: left hand. DCAC632: guide rail mounting plate. DCAC633: body mounting bracket kit.

Key specs

Max gate 330 lb, 4 ft 3 in wide
Post 2 in min
Gate gap 1/2 to 1-3/8 in
Mount options 14, push or pull side
Finish Black anodized

Manuals and documents

Spec Sheet

Troubleshooting

Gate does not close all the way

  • Check that the gate swings freely by hand with the closer unhooked.
  • Raise the closing tension or the final snap one step.
  • Check that the latch lines up with the keep.

Gate slams

  • Slow the closing speed with the adjusting valve or screw.
  • Check the hinges are tight and the gate is not sagging.

Common questions

Yes. Order DC622G-R or DC622G-L.

A mechanical hold-open comes with it.

No. Add a separate latch.