D&D Technologies SureClose ReadyFit Hinge-Closers Manuals & Support

D&D Technologies 74108 / 740013

SureClose ReadyFit 108 is a hydraulic hinge-closer with Final Snap for pool and child safety gates. Two 108 hinge-closers close gates up to 260 lb.

It mounts on the face of square metal frames and posts 2 in and up. A ReadyFit SM hinge pairs with one 108 for gates up to 180 lb.

Buy the 74108 / 740013 (6 options)

Identify your model

74108313T and 74108323T: screw-on hinge-closers. 74108315T and 74108325T: weld-on. 74001313T and 74001315T: ReadyFit SM hinges, screw-on and weld-on.

Key specs

Max gate 260 lb with two 108s, 180 lb with one 108 and one SM
Posts Square, 2 in and up
Gate gap 1/2 to 1-3/8 in
Opening Up to 88 degrees
Mount Screw-on or weld-on

Manuals and documents

Installation Manual

Troubleshooting

Gate does not close all the way

  • Check that the gate swings freely by hand with the closer unhooked.
  • Raise the closing tension or the final snap one step.
  • Check that the latch lines up with the keep.

Gate slams

  • Slow the closing speed with the adjusting valve or screw.
  • Check the hinges are tight and the gate is not sagging.

Common questions

Up to 260 lb with two hinge-closers.

No. It self-closes from 88 degrees.

It speeds up the end of the close to pull the gate into the latch.

Add the SureClose 7403 GateStop. It stops the gate at 85 degrees.