Diablo DSP-15 Board Mount Vehicle Detector Manuals & Support
Identify your model
The board is 2.90 x 4.125 in. LVT: pluggable screw terminal block. LVM: 10-pin male Molex. LVF: 10-pin female Molex.
Key specs
| Power | 10 to 30 VDC or 10 to 28 VAC |
|---|---|
| Relays | 2, 3 A |
| Sensitivity | 10 levels plus boost |
| Timing | 2 s delay; 0, 2, 5 or 10 s extension |
| Loop inductance | 20 to 2,000 µH |
| Operating temperature | -35 to 165 °F |
Manuals and documents
Installation Manual
-
DSP-15 User Manual
View PDF: DSP-15 User Manual (opens in a new tab)
Spec Sheet
-
DSP-15 Cut Sheet
View PDF: DSP-15 Cut Sheet (opens in a new tab) -
DSP-15 Spec Sheet, Earlier Edition
View PDF: DSP-15 Spec Sheet, Earlier Edition (opens in a new tab)
Other documents
-
Loop Sizes and Loop Characteristics Chart
View PDF: Loop Sizes and Loop Characteristics Chart (opens in a new tab)
Troubleshooting
Common questions
Match the control box: LVT for a terminal block, LVM for a male Molex, LVF for a female Molex.
Yes, power drops of about 3 seconds.
Use direct-burial loop wire such as 16 AWG XLPE, not THHN. Twist the lead-in about 6 turns per foot and seal saw cuts with loop sealant.