Diablo DSP-22 Loop Detectors for DoorKing Manuals & Support

Diablo DSP-22-1 / DSP-22-2

Diablo DSP-22 detectors plug into the loop ports on DoorKing gate operator boards. They are low power replacements for DoorKing detectors.

The DSP-22-1 is single channel and the DSP-22-2 is two channel. Both work with the Diablo Free Exit Probe in pulse mode.

Buy the DSP-22-1 / DSP-22-2 (2 options)

Identify your model

DSP-22-1: replaces DoorKing 9410. DSP-22-2: replaces DoorKing 9409 and 9405, channel 2 has a relay. DSP-22S-1: earlier DSP-22S model.

Key specs

Power 14 to 27 VDC
Draw About 0.7 mA (22-1), 1.6 mA (22-2)
Output Solid state 250 mA; relay on 22-2 channel 2
Sensitivity 4 levels plus boost
Fits DoorKing detector ports

Manuals and documents

Installation Manual

Spec Sheet

Other documents

Troubleshooting

Detector does not see vehicles

  • Check loop resistance and megger the loop to ground.
  • Check that the lead-in is twisted and the splice is sealed.

Random detects

  • Seal the slot so the wires cannot move.
  • Keep loops at least 3 ft from other loops and moving metal.

Common questions

The 22-1 replaces the 9410. The 22-2 replaces the 9409 and 9405.

Yes, in pulse mode.

Not with a probe or in fail-secure. Use presence and a loop.