Diablo XLP-8 Extreme Low Power Detector and Mini Loop Kit Manuals & Support

Diablo XLP-8 / XLP-8-100

The Diablo XLP-8 is an extreme low power single channel detector for solar and battery gates. It draws under 1 mA with no vehicle.

It works with a standard loop or a Diablo mini-loop probe. The XLP-8-100 kit adds the probe on a 100 ft lead-in.

Buy the XLP-8 / XLP-8-100 (2 options)

Identify your model

XLP-8: detector only. XLP-8-100: detector with mini-loop probe and 100 ft lead-in.

Key specs

Power 8 to 40 VDC or 8 to 28 VAC
Draw Under 1 mA, no vehicle
Relay NO and NC, 1 A
Sensitivity 9 settings
Loop range 20 to 1500 uH
Temperature -35 to 165 F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Detector does not see vehicles

  • Check loop resistance and megger the loop to ground.
  • Check that the lead-in is twisted and the splice is sealed.

Random detects

  • Seal the slot so the wires cannot move.
  • Keep loops at least 3 ft from other loops and moving metal.

Common questions

No. In probe mode there is no presence detection.

Either. A DIP switch sets it.

It draws under 1 mA with no vehicle.

Buy the Diablo XLP-8 Extreme Low Power Detector and Mini Loop Kit

Diablo Controls XLP-8 extreme low power loop detector
Diablo XLP-8 - Extreme Low Power Loop Detector
Diablo Controls
Diablo Controls XLP-8-100 mini loop kit
Diablo XLP-8-100 Mini Loop Kit - Extreme Low Power
Diablo Controls