EMX NIR Retroreflective Photo Eyes Manuals & Support

EMX NIR / NIR-50 / NIR-50-325

EMX NIR photo eyes are retroreflective infrared sensors for overhead doors, gates and barriers. The sensor mounts on one side and the reflector on the other, so only one side is wired.

The NIR reads up to 30 ft and the NIR-50 up to 50 ft. The NIR-50-325 is the UL 325 monitored version with a 10K output.

Buy the NIR / NIR-50 / NIR-50-325 (3 options)

Identify your model

NIR: 30 ft, not UL 325. NIR-50: 50 ft, replaces the NIR-PLUS, not UL 325. NIR-50-325: 50 ft, 10K monitored.

Key specs

NIR range 30 ft
NIR-50 range 50 ft
NIR and NIR-50 power 12 to 240 VDC or 24 to 240 VAC
NIR-50-325 power 12 to 30 VDC or 24 to 30 VAC
Housing IP66
Output Form C relay

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Gate or door will not close

  • Check that the beam is not blocked.
  • Clean the lens and the reflector.
  • Check the alignment LED and aim the sensor again.

Sensor drops out in sun or rain

  • Shield the sensor with the hood.
  • Lower the sensitivity or shorten the range to the site.

Common questions

The NIR-50-325, with a 10K monitored input.

No. Only the sensor side is wired. The reflector has no wires.

The NIR-50.