EMX SP-24 Surface Mount Loop Pad Manuals & Support

EMX SP-24

The EMX SP-24 is a sealed surface mount loop pad for automated car washes. It mounts between the guide rails and connects to a loop detector.

With an EMX detector it detects vehicles up to 30 in above the pad. The polypropylene housing stands up to car wash detergents.

Buy the SP-24

Identify your model

SP-24: 23.75 x 23.75 in pad with a 50 ft shielded twisted lead-in. The lead-in guard is optional.

Key specs

Size 23.75 x 23.75 x 1 in
Material Black polypropylene
Lead-in 50 ft, shielded twisted pair
Detection Up to 30 in high
Lead guard 24 x 3 x 0.5 in, optional

Manuals and documents

Installation Manual

Spec Sheet

Other documents

Troubleshooting

False detects

  • Make sure tires and equipment cannot hit the pad.
  • Lower the detector sensitivity.

No detect

  • Check the lead-in splice and the detector loop fault LED.

Common questions

Between the guide rails where it cannot be driven over or struck.

Yes. EMX lists it for its D-TEK detectors.

No. It is optional.