EMX TRES-900 UHF Reader Manuals & Support

EMX TRES-900 READER

This model is discontinued. Manuals and replacement parts for existing units are listed below.

The EMX TRES-900 is a long range UHF RFID reader for passive vehicle tags. It reads tags at 18 to 25 ft and can read several tags at once.

The focused antenna beam lets it mount on metal posts and walls. It is discontinued and replaced by the EMX PATRIOT-L.

Buy the TRES-900 READER

Identify your model

TRES 900.2 READER: 902-928 MHz reader. TRES-900-USB-RS232: serial connector kit for programming.

Key specs

Frequency 902-928 MHz, frequency hopping
Range 18 to 25 ft
Beam 70 degree cone
Tags Vertical mount only
Outputs Wiegand, Ethernet

Manuals and documents

Installation Manual

Programming Guide

Quick Start

Spec Sheet

Brochure

Troubleshooting

Card or tag does not read

  • Check that the credential format matches the reader and panel.
  • Check power at the reader.
  • Check the Wiegand data wires D0 and D1.

Short read range

  • Check for metal behind the reader or tag.
  • Check the supply voltage under load.

Common questions

The EMX PATRIOT-L.

Vertically.

With the TRES-900-USB-RS232 kit.