FAAC 455D Control Board in Metal Enclosure Manuals & Support

FAAC 455D115.1 / 455D220.1

The FAAC 455D is the control board for FAAC swing gate operators. One board runs a single gate or a bi-parting pair.

These listings come prewired in a lockable 18 x 16 in metal enclosure.

Buy the 455D115.1 / 455D220.1 (6 options)

Identify your model

455D115.1: 115 VAC board. 455D220.1: 230 VAC board. FAAC lists it for its 400, 402, 412, 415, 422, 750 and 760 swing operators. Boards only: 790944 (115 V, UL) and 790919 (115 V, earlier), 790945 (220 V, UL) and 790926 (220 V, earlier).

Key specs

Power 115 VAC or 230 VAC by model
Motor load 800 W max
Accessory power 24 VDC, 500 mA
Enclosure 18 x 16 in, lockable
Gates Single or bi-parting

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Operator does not run

  • Check power and the fuses.
  • Check the board display or LEDs for a fault.
  • Check that the safety inputs are not active.

Gate stops or reverses

  • Check the gate moves freely by hand.
  • Check photo eyes and edges.
  • Check the force and limit settings.

Common questions

FAAC 400, 402, 412, 415, 422, 750 and 760 swing operators.

One board runs both leaves.

Match the operator voltage: 115 VAC or 230 VAC.