Gatemaster Superlock 2.0 BDG and BDGL Double-Sided Code Locks Manuals & Support

Gatemaster BDG / BDGL

Gatemaster Superlock 2.0 BDG and BDGL are mechanical code gate locks with a keypad on both sides of a metal gate. No power is needed.

Enter the code and turn the handle to open. The BDGL has lever handles. Codes are set with tumblers.

Buy the BDG / BDGL (6 options)

Identify your model

BDG1030 and BDG4060: keypads both sides. BDGL1030 and BDGL4060: keypads both sides with lever handles, L or R hand. For a Delta handle see the BDGD. For a keypad on one side see the BDGS.

Key specs

Keypad Both sides
Frames 1030: 10-30 mm (1/2 to 1-1/4 in). 4060: 40-60 mm (1-1/2 to 2-1/4 in)
Bolt throw 20 mm (3/4 in)
Case width 70 mm
Power None, mechanical

Manuals and documents

Spec Sheet

Troubleshooting

Code does not open the lock

  • Check that the code was entered fully and in the right order.
  • Reset the code with the code change tool from the instructions.

Handle turns but the gate stays locked

  • Check the gate gap and the keep alignment.
  • Check that hold-back is not half set.

Common questions

No. It is fully mechanical.

1030 for 10-30 mm frames, 4060 for 40-60 mm.

Use the code change pack and the steps on the spec sheet.

The BSKS Superlock interlocking keep adds security.