Gatemaster Superlock 2.0 BDGW and BDGSW Wood Gate Code Locks Manuals & Support

Gatemaster BDGW / BDGSW

Gatemaster Superlock 2.0 BDGW and BDGSW are surface mounted mechanical code locks for wooden gates. No power is needed.

The BDGW has keypads on both sides. The BDGSW has a keypad outside and a lever inside. Standard fixings fit gates up to 75 mm thick.

Buy the BDGW / BDGSW (2 options)

Identify your model

BDGWR and BDGWL: keypads both sides, right or left hand. BDGSW: keypad one side. Gates 75-140 mm thick need the BDGWE140 extension kit.

Key specs

Gate Wood, surface mount
Thickness Up to 75 mm, 140 mm with BDGWE140
Bolt travel 20 mm into the keep
Power None, mechanical

Manuals and documents

Spec Sheet

Troubleshooting

Code does not open the lock

  • Check that the code was entered fully and in the right order.
  • Reset the code with the code change tool from the instructions.

Handle turns but the gate stays locked

  • Check the gate gap and the keep alignment.
  • Check that hold-back is not half set.

Common questions

No. It is fully mechanical.

Up to 75 mm with the standard fixings, or 75-140 mm with the BDGWE140 kit.

Use the code change pack and the steps on the spec sheet.

Yes, the BDGSWRR. See the Superlock 2.0 RapidReset page.