Keedex Electric Strike and Blank Weld Boxes Manuals & Support

Keedex K-BXES3A / K-BXES8 / K-BXE2000 / K-BX515175

Keedex weld boxes weld to the gate frame or post and house a lock or electric strike. They protect the hardware and give a clean mount on metal gates.

This page covers the electric strike boxes, the Kaba E-Plex 2000 box and the blank boxes you cut to suit.

Buy the K-BXES3A / K-BXES8 / K-BXE2000 / K-BX515175 (5 options)

Identify your model

K-BXES3A: strike box for Adams Rite 7100, 7101 and 7140, HES 5000U (501 option), Trimec ES100 and Rofu 2402. K-BXES8: strike box for Trine 001. K-BXE2000: Kaba E-Plex 2000 box. K-BX515175: blank 5 x 15 in box, -AL is aluminum.

Key specs

K-BXES3A 2-3/8 x 5-1/16 x 1-3/4 in, 14 ga steel
K-BXES8 1-1/2 x 6-1/8 x 2 in, 14 ga steel
K-BXE2000 5-1/2 x 10 x 1-3/4 in, 2-3/4 in backset
K-BX515175 5 x 15 x 1-3/4 in, steel or aluminum

Manuals and documents

Spec Sheet

Troubleshooting

Lock does not fit the box

  • Check the backset and bore of the lock against the box drawing.
  • Use the lock template for exact preps. The drawings are not to scale.

Box rusts after welding

  • Clean the welds and paint or powder coat the box.
  • Use the aluminum version on aluminum gates.

Common questions

No. Use the template for the lock or strike you install.

No. The box holds the strike. The strike, power supply and wiring are separate.

Yes for several boxes, marked -AL.