Locinox MODULEC-SA Surface Electric Strike Manuals & Support

Locinox MODULEC-SA-E / MODULEC-SA-R

The Locinox MODULEC-SA is a surface mounted electric strike for Locinox surface mounted gate locks. It runs on 12 or 24 V, AC or DC, and holds the latch bolt with 660 lb of force.

The E (Emissa) version is fail closed. The R (Ruptura) version is fail open. It uses the same drilling as Locinox SA keeps, so it can replace an SA keep directly.

Buy the MODULEC-SA-E / MODULEC-SA-R (4 options)

Identify your model

-9005 is black anodized aluminum and -ALUM is uncoated. It adjusts for gate profiles 1-9/16 to 2-3/8 in deep. Handing changes on site.

Key specs

Power 12 to 24 V AC/DC
Holding force 660 lb
Versions E fail closed, R fail open
Profile 1-9/16 to 2-3/8 in
Tested 500,000 cycles

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Strike does not release

  • Check 12 or 24 V at the strike when it is triggered.
  • Check that the gate is not pulling on the latch.

Common questions

The R version releases on power loss. The E version stays locked.

Yes, Locinox surface mounted locks. It uses the SA keep drilling.

Yes, on site.