Locinox Valentino Battery Code Lock with Free Exit Manuals & Support

Locinox LOKQ..Y2LVCACR

The Locinox Valentino LVCACR is a surface gate lock with a lit code panel outside and free exit inside. No code is needed to leave.

It stores up to 100 codes and runs on a battery pack, with no wiring. One battery set lasts up to 150,000 cycles.

Buy the LOKQ..Y2LVCACR (6 options)

Identify your model

Model numbers end in LVCACR. LOKQ30: 1-1/4 to 2 in. LOKQ40: 1-1/2 to 2-1/2 in. LOKQ60: 2-1/2 to 3 in. LOKQ80: 3 to 4 in. LOKQ100: 4 to 4-3/4 in. Black (9005) or silver. For codes on both sides see the LVCAC.

Key specs

Codes Up to 100
Battery life Up to 150,000 cycles
Rating IP56
Power Battery pack
Exit Free exit, no code

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Keypad does not light

  • Replace the battery pack.
  • Check the cable between keypad and lock through the profile.

Valid code does not open

  • Check the low battery light.
  • Re-enter the code. Add it again in programming mode if needed.

Common questions

No. The LVCACR has free exit on the inside.

No. It runs on a battery pack.

Pick by gate profile: LOKQ30 for 1-1/4 to 2 in up to LOKQ100 for 4 to 4-3/4 in.