Nationwide CL-7210 Series Chain Link Self-Closing Hinges Manuals & Support

Nationwide CL-7210 series hinges are heavy duty self-closing spring hinges for chain link gates. Two hinges are needed per gate.

Mounted in line the gate opens about 90 degrees. Mounted offset it opens about 180 degrees.

Buy the CL-7210 / CL-7211 / CL-7212 (6 options)

Identify your model

CL-7210: 2-3/8 to 2-7/8 in post, 1-3/8 to 1-5/8 in frame. CL-7211: same post, 1-3/8 to 2 in frame. CL-7212: 4 in post, 1-3/8 to 2 in frame. BK black, GY gray.

Key specs

CL-7210 post	2-3/8 to 2-7/8 in
CL-7212 post	4 in
Frame	1-3/8 to 2 in, by model
Swing	About 90 or 180 degrees
Tension	Up to one full turn

Manuals and documents

Installation Manual

CL-7210 Series Installation Instructions
1 page View PDF: CL-7210 Series Installation Instructions (opens in a new tab)

Spec Sheet

CL-72XX Sell Sheet
1 page View PDF: CL-72XX Sell Sheet (opens in a new tab)

Troubleshooting

Gate sags or drags

Tighten the hinge bolts.
Use the height and depth adjustments to level the gate.

Gate does not self-close

Raise the spring tension one setting.
Check that the gate is level and not binding at the latch.

Common questions

Hold the hex with a wrench, loosen the set screw and turn. Clockwise adds tension, up to one full turn.

Two per gate.

The CL-7212.

Buy the Nationwide CL-7210 Series Chain Link Self-Closing Hinges

Nationwide Industries CL-7212-BK Self-Close Chain Link Gate Hinge - Black

Nationwide Industries

Nationwide Industries CL-7210-BK Self-Close Chain Link Gate Hinge - Black

Nationwide Industries

Nationwide Industries CL-7210-GY Self-Close Chain Link Gate Hinge - Gray

Nationwide Industries

Nationwide Industries CL-7212-GY Self-Close Chain Link Gate Hinge - Gray

Nationwide Industries

Nationwide Industries CL-7211-GY Self-Close Chain Link Gate Hinge - Gray

Nationwide Industries

Nationwide Industries CL-7211-BK Self-Close Chain Link Gate Hinge - Black

Nationwide Industries