Nice Apollo OXI Receivers Manuals & Support

Nice Apollo OXI/A / OXIBD/A

The Nice OXI receivers are plug-in 433.92 MHz NiceOne receivers for Nice Apollo and HySecurity control boards. They store up to 1,024 transmitters.

They work with Era One and Inti rolling-code remotes and older Flo-R remotes. The OXI/A has been replaced by the 4-channel OXIBD/A.

Buy the OXI/A / OXIBD/A (2 options)

Identify your model

The OXI plugs into the receiver socket on the 1050 board and SmartCNX controllers and uses the ABF/A antenna kit. Models with T in the name have a built-in transmitter.

Key specs

Frequency 433.92 MHz
Memory 1,024 transmitters
Remotes Era One and Inti (O-Code), Flo-R
Connection Plug-in SM connector or 6-wire universal
Power, universal models 12 or 24 VAC or VDC by jumper

Manuals and documents

Installation Manual

Quick Start

Troubleshooting

Check stored codes

  • Cycle power and count the green flashes: 1 is Flo, 2 is O-Code, Flo-R or TTS.

No range

  • Install the ABF/A antenna and connect it to the antenna terminals on the board.

Cannot add remotes

  • Use Mode I to store all keys of a remote in one place, or Mode II to store keys one at a time.

Common questions

Up to 1,024 transmitters.

The OXIBD/A 4-channel receiver.

Nice Era One and Inti rolling-code remotes, and Flo-R remotes.