Protec Controls XLPE 16 AWG Loop Wire Manuals & Support

Protec Controls XLPE-16

XLPE-16 is 16 AWG tinned copper loop wire with cross-linked polyethylene insulation rated 125 °C. It is for saw-cut and direct burial vehicle loops.

It comes by the foot or on 500 or 1000 ft spools.

Buy the XLPE-16 (3 options)

Identify your model

Black XLPE jacket over stranded tinned copper. Use it in place of THHN, which takes on water and drifts.

Key specs

Wire 16 AWG, tinned copper
Insulation XLPE, 125 °C
Lengths By the foot, 500 ft, 1000 ft
Use Saw-cut and direct burial loops

Manuals and documents

Spec Sheet

Other documents

Troubleshooting

Detector does not see vehicles

  • Check loop resistance and megger the loop to ground.
  • Check that the lead-in is twisted and the splice is sealed.

Random detects

  • Seal the slot so the wires cannot move.
  • Keep loops at least 3 ft from other loops and moving metal.

Common questions

XLPE does not take on water. THHN can soak up water and make the loop drift.

See the loop size chart. Most loops use 3 turns, and small loops use 4.

Twist it about 6 turns per foot back to the detector.