Seco-Larm E-932-D33TBQ Flush-Mount Photobeam Manuals & Support

Seco-Larm E-932-D33TBQ

The Seco-Larm E-932-D33TBQ is a dual through-beam photoelectric sensor with a 33 ft range. The transmitter and receiver each fit a single-gang box, so they sit flat on the wall.

It runs on 12 to 18 VDC and draws 50 mA max. The Form C output switches when the beam is broken, with a 10 ms response. Alignment adjusts 15 degrees each way.

Buy the E-932-D33TBQ

Identify your model

Each unit is 4-3/4 x 2-3/4 x 1-1/2 in. LEDs show transmitter power and receiver alignment.

Key specs

Type Dual through-beam
Range 33 ft
Operating voltage 12 to 18 VDC
Current draw 50 mA max
Output Form C, 1 A
Response time 10 ms
Alignment 15 degrees horizontal and vertical
Operating temperature 14 to 122 °F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Receiver will not align

  • Aim the transmitter and receiver face to face and watch the alignment LED.
  • Check the supply is 12 to 18 VDC at both ends.

False triggers

  • Clean both lenses.
  • Keep sunlight from shining straight into the receiver.

Common questions

No. Use 12 to 18 VDC.

No. It is an entry sensor, not a monitored photo eye for gate operators.

A single-gang box at each end.