Seco-Larm SH-313, SH-504 and SH-506 Buzzers and SH-532BQ Chime Manuals & Support

Seco-Larm SH-313B / SH-313N / SH-504Q / SH-506Q / SH-532BQ

The Seco-Larm SH buzzers are small electronic buzzers, often used to sound while a strike or lock is released. The SH-313B and SH-313N are on plates and run on 12 VDC at 35 mA, 93 dB.

The SH-504Q (5 to 15 VDC, 91 dB) and SH-506Q (6 to 28 VDC, 93 dB) are 1 in surface buzzers. The SH-532BQ is a flush-mount 3-tone chime on 12 to 24 VDC.

Buy the SH-313B / SH-313N / SH-504Q / SH-506Q / SH-532BQ (5 options)

Identify your model

SH-313B: single-gang plate. SH-313N: slimline plate. SH-504Q: black and tan, 1 in round. SH-506Q: black, 1 in round. SH-532BQ: white flush chime.

Key specs

SH-313B / SH-313N 12 VDC, 35 mA, 93 dB at 400 Hz
SH-504Q 5 to 15 VDC, 35 mA at 12 VDC, 91 dB
SH-506Q 6 to 28 VDC, 35 mA at 12 VDC, 93 dB
SH-532BQ 12 to 24 VDC, 80 to 88 dB, 3 tones

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

No sound

  • Check polarity. Buzzers are DC devices.
  • Check the supply voltage is inside the rated range.

Common questions

Yes. Wire it to the same output as the strike or lock.

The SH-506Q and the SH-532BQ chime.

The SH-313B on a single-gang box and the SH-313N on a slimline box.