Seco-Larm SK-1323 Sealed Metal Keypads Manuals & Support

Seco-Larm SK-1323-SDQ / SPQ / BDQ / BPQ

The Seco-Larm SK-1323 keypads have a sealed aluminum housing rated IP65 and the circuit is potted in epoxy for outdoor use. They hold 1,010 users and run on 12 to 24 VAC/VDC.

Two Form C relays are rated 1 A at 30 VDC, timed 1 to 99 seconds or toggle. The SPQ and BPQ add a 125 kHz prox reader, and output 1 can be set for card only, card or code, or card and code.

Buy the SK-1323-SDQ / SPQ / BDQ / BPQ (4 options)

Identify your model

SK-1323-SDQ: brushed aluminum, keypad only. SK-1323-SPQ: brushed aluminum with prox. SK-1323-BDQ and SK-1323-BPQ: black. The mullion versions are the SK-2323.

Key specs

Users 1,010: 1,000 on output 1, 10 on output 2
Operating voltage 12 to 24 VAC/VDC
Relays 2, Form C, 1 A at 30 VDC
Output time 1 to 99 seconds or toggle
Prox SPQ and BPQ: 125 kHz EM
Inputs 2 egress, door sensor
IP rating IP65

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Lock does not release on a good code

  • Check that the lock wire is on the correct relay terminal: N.O. for fail-secure, N.C. for fail-safe.
  • Install the diode across a DC lock or a varistor across an AC lock, unless the lock has its own protection.

Keypad is dead

  • Check the supply voltage at the power leads.

Common questions

The SPQ and BPQ have a built-in prox reader. The SDQ and BDQ are keypad only.

125 kHz EM prox credentials, such as PR-K1S1-A cards and PR-K1K1-AQ key fobs. They are sold separately.

Yes. Change the factory master code during setup and record the new one.