Seco-Larm SL-126 Xenon Strobe Lights Manuals & Support

Seco-Larm SL-126Q / SL-126-A24Q

The Seco-Larm SL-126Q and SL-126-A24Q are xenon tube strobe lights with 100,000 candle-power for signaling. The SL-126Q runs on 6 to 12 VDC and is UL listed; the SL-126-A24Q runs on 6 to 24 VDC.

They wire with 2 leads (12 in, 18 gauge), have reverse polarity protection and an IP55 rating. The SL-126LQ is the replacement lens.

Buy the SL-126Q / SL-126-A24Q (10 options)

Identify your model

The model ends in the lens color: /A amber, /B blue, /C clear, /G green, /R red. A clear inner cover protects the tube when the colored lens is off. Conduit brackets: SL-1901-DAQ drop and SL-1901-JAQ box.

Key specs

Light Xenon tube, 100,000 candle-power
Operating voltage SL-126Q: 6 to 12 VDC; SL-126-A24Q: 6 to 24 VDC
Current draw at 12 VDC SL-126Q: 330 mA; A24Q: 180 mA
Flash rate at 12 VDC SL-126Q: over 90 per minute; A24Q: over 70 per minute
Life Over 2,000,000 flashes
IP rating IP55
Size 3-15/16 in dia. x 3-1/8 in

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Strobe does not flash

  • Check the power source and the lead connections. Red is positive.

Strobe is dim or flashes slowly

  • Check the voltage is inside the range for the model. Flash rate drops at low voltage.

Common questions

Use the SL-126Q on 6 to 12 VDC when a UL listed strobe is needed. Use the SL-126-A24Q on 24 VDC systems.

Yes. Order the SL-126LQ lens in the color you need.

No. It is for general signaling, not fire alarm notification.