Seco-Larm SL-1301-EAQ 6-LED Strobe Light Manuals & Support

Seco-Larm SL-1301-EAQ

The Seco-Larm SL-1301-EAQ is a flash-only LED strobe light with 6 high-intensity LEDs. It runs on 9 to 15 VDC and flashes 120 times per minute.

It is the same size as the SL-126Q strobe, wires with 2 leads, has reverse polarity protection and an IP64 weather-resistant case. Lens colors are amber, blue, clear, green and red.

Buy the SL-1301-EAQ (5 options)

Identify your model

The model ends in the lens color: /A amber, /B blue, /C clear, /G green, /R red. The BAQ adds flash patterns and the SAQ adds a siren. Conduit brackets: SL-1901-DAQ drop and SL-1901-JAQ box.

Key specs

LEDs 6
Operating voltage 9 to 15 VDC
Current draw 150 mA max
Flash 120 per minute, flash only
IP rating IP64
Operating temperature -4 to 144 °F
Size 3-15/16 in dia. x 3-1/8 in

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Strobe does not light

  • Check the supply voltage at the leads and the polarity. Red is positive.
  • Check the trigger output on the panel or controller that powers the strobe.

Common questions

No. The EAQ is flash only. The SL-1301-BAQ and SAQ have 8 patterns.

No. The EAQ is 9 to 15 VDC. Use the BAQ or SAQ for 9 to 24 VAC or VDC.

It is the same size as the SL-126Q strobe light.