Seco-Larm SL-1311-MA/B High-Intensity LED Flasher Manuals & Support

Seco-Larm SL-1311-MA/B

The Seco-Larm SL-1311-MA/B is a blue LED flasher module with four 1 W high-intensity LEDs. It runs on 10 to 30 VDC and draws up to 560 mA at 12 VDC.

It has 19 flash patterns and remembers the last one at power-up. Up to 15 units sync to flash together or alternate. The circuit is epoxy-potted and IP66.

Buy the SL-1311-MA/B

Identify your model

The SL-1311-MA/B is 4-1/2 x 1-1/4 x 1-3/16 in with blue LEDs. It mounts on a surface or flush, often outside an alarm bell box.

Key specs

LEDs 4 x 1 W, blue
Operating voltage 10 to 30 VDC
Current draw 560 mA at 12 VDC, 300 mA at 24 VDC
Flash patterns 19
Sync Up to 15 units
IP rating IP66
Operating temperature -22 to 150 °F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Does not flash

  • Check polarity and 10 to 30 VDC at the leads.

Units do not flash together

  • Connect the sync wires between units.

Common questions

Yes. Up to 15 units sync to flash together or alternate.

Yes. It is epoxy-potted and IP66.

Yes. It recalls the last pattern at power-up.