Seco-Larm SL-S212-RAQ Flexible LED Strip Manuals & Support

Seco-Larm SL-S212-RAQ

The Seco-Larm SL-S212-RAQ is a 12 in red flexible LED strip with 12 LEDs. It runs on 12 VDC, draws 200 mA and can be cut every 3 LEDs.

Up to 30 strips connect in series. Wiring sets three brightness levels. It has a self-adhesive back and a 120 degree beam.

Buy the SL-S212-RAQ

Identify your model

The strip has a 4-pin gold-plated connector and an adapter. Options: SL-SAS-EC1Q end caps and SL-SAS-SH1Q fasteners.

Key specs

Length 12 in, 12 LEDs
Operating voltage 12 VDC
Current draw 200 mA (2.4 W), 50 mA per 3 LEDs
Cut Every 3 LEDs
Series Up to 30 strips
Beam 120 degrees
Use Indoor; house the connectors outdoors

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Strip does not light

  • Check 12 VDC and polarity at the connector.
  • Check the cut was made at a cut mark.

Common questions

Yes, every 3 LEDs.

A 12 VDC supply. Seco-Larm lists the ST-UV12-S1.0Q for up to 4 strips and the ST-UV12-S2.0Q for up to 9.

House or seal the connectors for outdoor use.