Seco-Larm SM-4201 Series Track-Mount Overhead Door Contacts Manuals & Support

Seco-Larm SM-4201-L3Q

The Seco-Larm SM-4201-L3Q is a track-mount overhead door magnetic contact for alarm and access systems.

It has a 3 in gap, an aluminum housing sealed to IP65 and 36 in armored leads. The switch clamps to the door track and fits channels 2 to 2-1/2 in wide. The L3Q is SPDT, the L6Q is DPDT and the LWQ fits wide channels.

Buy the SM-4201-L3Q (3 options)

Identify your model

SM-4201-LQ: SPST, 2 wires. SM-4201-L3Q: SPDT, 3 wires. SM-4201-L6Q: DPDT, 6 wires. SM-8201-LWQ: wide L-bracket for wide door channels.

Key specs

Mount Overhead door track
Gap 3 in
Door channel width 2 to 2-1/2 in; LWQ for wider channels
Contacts L3Q: SPDT; L6Q: DPDT
Leads 36 in armored
Housing Aluminum, IP65
Magnet Ferrite
Contact rating 1.0 A at 10 VDC, 10 W max
Switch life 50 million cycles at 0.1 mA, 5 VDC
Operating temperature -15 to 160 °F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Zone shows open with the door closed

  • Close the door and check the gap between switch and magnet. It must be inside the rated gap.
  • Line up the magnet with the switch. Use the included spacers if the parts sit at different heights.
  • Steel doors and frames weaken the magnet. Keep the gap smaller on steel or use a contact rated for steel doors.

Zone does not trip when the door opens

  • Set the panel zone for a closed loop (N.C.) device.
  • Check for a second magnet or other steel hardware near the switch.

False alarms

  • Check the wire connections and look for nicked leads.
  • A loose door that moves in the wind can open the loop. Use a wider gap contact on loose doors.

Common questions

The L3Q and L6Q have NO, NC and COM wires, so they work on either. The LQ and LWQ are closed loop.

Install the switch and magnet on the protected side of the door or window so they cannot be reached from outside.

Use the L3Q for one open/closed loop, the L6Q to feed two systems, and the LWQ for door channels wider than 2-1/2 in.